模拟酸雨对街道灰尘重金属淋溶的累积释放特征与释放模型

以泉州市交通繁忙区街道灰尘为研究对象,采用模拟酸雨动态淋溶实验和改进的BCR四步提取法研究街道灰尘中重金属元素在不同酸度(pH=3.5、4.5、5.6)模拟酸雨淋溶下的溶出规律及形态变化.结果表明,街道灰尘中重金属元素的累积释放量均随模拟酸雨pH的降低而增加,当pH值为3.5和4.5时,Cu、Pb、Mn、Ni、V、As和Co的释放过程为快速释放阶段,Cr、Zn和Fe的释放过程分为快速释放和相对平稳释放两个阶段;当pH值为5.6时,除Co、V为快速释放过程外,其余重金属都处于相对慢速的释放过程.动力学方程拟合结果表明,双常数速率方程能更好地描述上述重金属元素的累积释放特征.尘样经模拟酸雨淋溶后,弱酸可溶态中Co、Cu、Mn、Zn、Ni百分含量有所增加,Cr、Fe、Pb百分含量变化不明显;可还原态中Cr、Pb、Cu、Ni百分含量有所增加,Mn、Zn、Co百分含量有所下降;可氧化态中上述各元素的百分含量均有所降低;残渣态中除Ni、Mn百分含量有所下降外,其它元素百分含量变化均不显著.     

Heavy metals contamination in mudflat and mangrove sediments (Mumbai,India)

The focus of this study, carried out on mudflat and mangrove sediments of Ulhas Estuary and Thane Creek in Mumbai, India, documents how sediment analysis in different ecosystems can help in understanding metal behaviour and pollution status of the region. Based on the the geoaccumulation index (I _geo ), the study shows that the estuarine and creek regions, being recipients of industrial and domestic wastes, display moderate pollution. Ulhas Estuary with higher clay and organic matter contents, exhibits higher amounts of metals than Thane Creek. Furthermore, using correlation and cluster analyses, the creek projects stable subenvironments with similar types of metal associations, with Fe and total organic carbon as the dominant metal carriers. By contrast, in the estuarine subenvironments, the metal associations do not reveal any distinct trend, which may be attributed to the disturbance caused by dredging activities routinely carried out in the region. Factor analysis carried out on I _geo data in both regions further helped in identifying polluted metal groups.     

Response of benthic foraminifera to heavy metal contamination in marine sediments (Sicilian coasts,Mediterranean Sea)

To examine the suitability of benthic foraminifera and their test deformations as bioindicators of pollution in coastal marine environments, we studied foraminifera and metal concentrations in 72 marine sediment samples, collected from the inner shelf along the Sicilian coast (Gulfs of Palermo and Termini) and on the south-eastern coast of Lampedusa Island. These areas are characterised by different environmental conditions. On the basis of pollution sources and foraminiferal assemblages, we recognised different zones in the Gulf of Palermo. The most polluted zones showed high metal concentrations, and low diversity of benthic foraminifera with species typical of stressed environments. By contrast, the lowest polluted zones showed a high population density and the highest percentages of epiphytes. Epiphytes were abundant where a Posidonia oceanica meadow was present and decreased in the most polluted zones. Sediments of the Gulf of Termini and Lampedusa exhibited high percentages of benthic foraminifera typical of well-oxygenated waters and low concentrations of metals, with the exception of sites located near sewage outfalls and harbour areas. Furthermore, even though deformed tests are commonly known in natural stressed environmental conditions, this study shows that in the most polluted zones, benthic foraminifera were characterised by the highest percentages of deformed individuals.     

Heavy metals uptake from aqueous solutions using marine algae (Colpomenia sinuosa): kinetics and isotherms

The adsorption of copper, zinc, cobalt, lead and cadmium ions onto Colpomenia sinuosa was studied as a function of contact time, initial metal ion concentration and initial pH. In addition, desorption studies were performed. Characterisation of this adsorbent was also confirmed by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) analysis. Batch adsorption experimental data were analysed using Langmuir, Freundlich and Dubinin–Raduschkevich (D–R) adsorption isotherms. The results indicated that the biosorption equilibrium was well described by both the Freudlich and D–R isotherms. Moreover, sorption kinetics was performed and it was observed that equilibrium was reached in<60 min, which could be described by the pseudo-second-order kinetic model for all heavy metals. The sorption of heavy metals onto the biomass was largely dependent on the initial solution pH. The elution efficiency for heavy metal ions desorption from C. sinuosa was determined for 0.1 M HCl, 1.0 M HCl and 1.0 M HNO₃. Desorption efficiency and also adsorption capacity were highest for Pb(II). The results indicate that C. sinuosa has great potential for the removal of heavy metals in an ecofriendly process.     

Uptake of seven metals by two macrophytes species: potential for phytoaccumulation and phytoremediation

Aquatic macrophytes can be used in the studies of quality of water ecosystems and in monitoring of metals and other pollutants. The aim of this study was to assess concentration levels, accumulation and distribution of seven metals in selected plant parts of Typha angustifolia L. and Iris pseudacorus L., in comparison with sediment and water samples of a reservoir. Metal content in the samples was determined by optical emission spectrometry (ICP-OES iCAP 6500). The concentrations of all examined metals were higher in the sediment than in the water samples. In plants, metal concentrations depended on plant species and organs. The roots/rhizomes were primary organs for metal concentration and accumulation. T. angustifolia L. accumulated Mn and Cu, and I. pseudacorus L. accumulated Cd and Cu in the fruits. T. angustifolia L. hyperaccumulated As. The values of enrichment coefficients and translocation factors were: 0 to 3.31 and 0 to 2.39, respectively. The plant species investigated absorb, translocate and accumulate metals in their organs differently, which provides advantages in combining them for remediation of wasted aquatic ecosystems.     

Some aspects of heavy metals contamination remediation and role of biosurfactants

Contamination by heavy metals is the result of different industrial activities. The presence of heavy metals in soil and water causes serious problems, as these materials are not biodegradable and do contaminate both biological systems and the subsoil. Biological surface-active compounds otherwise known as biosurfactants in general and rhamnolipids biosurfactants in particular have been successfully employed in the remediation of environments contaminated with heavy metal ions. The aim of the present review is to highlight potential applications of these tensioactive compounds for use in environmental heavy metals removal and bioremediation and processes involved.     

Roe and red deer as bioindicators of heavy metals contamination in north-western Poland

The present paper examines the degree of environmental contamination in areas covered by the Natura 2000 programme, located in north-western Poland, with selected heavy metals based on their concentration in target organs of roe and red deer. Lead, cadmium, copper, iron, and zinc concentrations were determined by inductively coupled plasma–atomic emission spectrometry. Residues of lead and cadmium were found in most of the analysed samples of roe and red deer organs The concentration of cadmium in the organs of the animals studied was much higher than that of lead. The median for Pb in liver and kidneys was 0.055 and 0.092 μg/g dry weight (d.w.) in roe deer, and 0.067 and 0.081 μg/g d.w. in red deer, respectively. The median for liver and kidney cadmium was 0.770 and 6.139 μg/g d.w. in roe deer, and 0.422 and 6.365 μg/g d.w. in red deer, respectively. Our study has demonstrated that this area is laden with lead and cadmium. This is evidenced by the fact that maximum permissible levels of these elements in the organs of red and roe deer, which were used as bioindicators of environmental contamination, were exceeded.     

The gastropod Osilinus atrata as a bioindicator of Cd,Cu, Pb and Zn contamination in the coastal waters of the Canary Islands

The aim of this study was to assess the use of Osilinus atrata (Gastropoda, Mollusca) as a biomonitor of heavy metals (Cd, Cu, Pb and Zn) within the coastal zone of the Canary Islands. In general, this top-shell snail showed high intraspecific variability in its tissue metal concentrations, which decreased according to the following sequence: Cu≥Zn>Cd≥Pb. In particular, Cd and Zn concentrations were higher in males than in females, whereas Cu concentrations increased slightly with weight, and Pb concentrations decreased. Cd and Cu concentrations showed notable spatial variability; Cd concentrations were higher in the eastern islands (Alegranza, La Graciosa, Lanzarote and Fuerteventura) and La Palma, whereas Cu levels were highest in some western islands (Gran Canaria, La Gomera and El Hierro). The arrival of waters from the African coastal upwelling, the pollution of coastal waters with agricultural fertilisers and the competition for uptake between metals appear to be the likely causes within these patterns of accumulation. In conclusion, O. atrata presents a great potential as a biomonitor of heavy metals, however, more information and further studies are necessary.     

Heavy metals distribution and risk assessment in soils affected by tannery effluents

Effluents collected from tanneries in Sialkot showed considerably higher levels of heavy metals. Sodium (12 660.91 mg/L) among macronutrients and Cr (592.20 mg/L) among heavy metals were found in the highest concentrations. Effluent parameters, i.e. biological oxygen demand (BOD; 12.40), chemical oxygen demand (COD; 16.53), Cd (5.90), Cr (592.20) and Fe (18.59) were the respective times higher than Pakistan National Environmental Quality Standards and their continuous unchecked discharge into agricultural soils poses a potential risk. Mean concentrations (mg/L) of Cr (592.20), Ni (2.66), Mn (1.16), Fe (37.17), Zn (0.90), Cd (0.59) and Pb (1.18) in this study exceeded levels recorded to date from different tanning hubs in Pakistan. Factor analysis/principal components analysis (FA/PCA) for the effluent parameters resulted in six varimax factors, i.e. VF1 (salinity, electrical conductivity, total dissolved solids, chloride, phosphate, BOD and COD; including characteristic tannery effluent features), VF2 (pH, Cr and alkalinity; tanning operations), VF3 (Cd and Pb; dyeing processes), VF4 (Mn and Fe; finishing operations), VF5 (Ni; retaining processes) and VF6 (hardness, Ca and Cu; bating processes). Cluster analysis performed on metal data resulted in three clusters confirming metal–metal relations obtained either from FA/PCA or a correlation matrix. The results of this study are useful for heavy metal source apportionment, assessment of risk to peripheral soils and the future management of environments around tanneries.     

Impact of heavy metals on bacterial communities from mangrove soils of the Mahanadi Delta (India)

This study aimed to assess soil nutrient status and heavy metal content and their impact on the predominant soil bacterial communities of mangroves of the Mahanadi Delta. Mangrove soil of the Mahanadi Delta is slightly acidic and the levels of soil nutrients such as carbon, nitrogen, phosphorous and potash vary with season and site. The seasonal average concentrations (μg/g) of various heavy metals were in the range: 14 810–63 370 (Fe), 2.8–32.6 (Cu), 13.4–55.7 (Ni), 1.8–7.9 (Cd), 16.6–54.7 (Pb), 24.4–132.5 (Zn) and 13.3–48.2 (Co). Among the different heavy metals analysed, Co, Cu and Cd were above their permissible limits, as prescribed by Indian Standards (Co=17 μg/g, Cu=30 μ g/g, Cd=3–6 μ g/g), indicating pollution in the mangrove soil. A viable plate count revealed the presence of different groups of bacteria in the mangrove soil, i.e. heterotrophs, free-living N₂ fixers, nitrifyers, denitrifyers, phosphate solubilisers, cellulose degraders and sulfur oxidisers. Principal component analysis performed using multivariate statistical methods showed a positive relationship between soil nutrients and microbial load. Whereas metal content such as Cu, Co and Ni showed a negative impact on some of the studied soil bacteria.