多种气压条件下甲醇池火燃烧特性的实验研究

通过自行研制的低氧低压模拟试验箱开展了小尺寸甲醇油池火燃烧实验,研究了在多种气压条件(40kpa、45kpa、55kpa、65kpa、75kpa、85kpa、100kpa)下的油池火燃烧特性参数的差异。实验发现,一定情况下,甲醇燃烧速率随着气压的升高而升高,呈现幂函数关系;火焰高度和火焰面积从低压开始先随着气压值的升高而升高,当达到一定的气压值后就会随着气压值的升高而降低;随着气压升高,羽流中心温度下降的幅度变缓。     

大型水体下顶水安全开采的可行性研究

在大型水体下顶水采煤,一方面要确保煤矿井下安全生产,同时要保护地表水资源不被破坏。基于峰峰矿区小屯矿的地质采矿条件,在分析与评价上覆岩层结构的基础上,选取水体下11个计算特征点,探讨上覆岩层破坏高度、防水安全煤岩柱及安全煤岩柱最小富余尺寸,绘制各类等值线图。采用概率积分法,从下沉、倾斜、水平变形和裂缝深度等方面,研究分析顶水开采后水体底部所受的采动影响。结果表明,在特定的地质采矿条件下,各工作面开采以后,上覆岩层中导水裂隙带发育的最大标高与基岩顶部之间具有较厚的岩柱,导水裂隙带不会波及到地表水体,水体底部的地表移动变形较小,不会影响到矿井安全生产,在大型水体下顶水采煤是安全可行的。     

Natural under-canopy regeneration and height-age structure of small-leaved linden (<Emphasis Type="Italic">Tilia cordata</Emphasis> Mill.) undergrowth in water-conservation forests around Pavlovskoe Reservoir,Ufa River

Natural regeneration and the height-age structure of small-leaved linden (Tilia cordata Mill.) under a forest canopy were studied with regard to specific features of forest typology on the Ufa Plateau. For the first time, the height-age structure of linden undergrowth was analyzed by an anatomical method, which allowed accurate determination of the actual plant age and linear increment. The results of this analysis made it possible to reveal three periods in the development of linden undergrowth with respect to the linear growth rate and abundance of plants. More successful regeneration of linden was observed in open elements of relief.     

Exploitation of renewable energy resources for environment‐friendly sustainable development in Saudi Arabia

The recent increase in energy costs, driven by a surge in oil prices, has increased world‐wide efforts on the exploitation of renewable/wind energy resources for environment‐friendly sustainable development and to mitigate future energy challenges. Moreover, experience in the wind energy industry has reached high levels in the field of manufacturing and application. This inevitably increases the merits of wind energy exploitation. In order to exploit wind resources, through the establishment of wind power plants, specific attention must be focused on the characteristics of wind and wind machines. The literature indicates that wind‐energy resources are relatively better along coastlines. In the present study, long‐term hourly mean wind speed data for the period 1986–2003, recorded at Dhahran (Eastern Coastal region, Saudi Arabia), has been analysed to examine the wind characteristics including (but not limited to): yearly/monthly/diurnal variations of wind speed, frequency distribution of wind speed, impact of hub‐height/machine‐size on energy production, etc. Data have been checked/validated for completeness. Data analysis indicated that long‐term monthly average wind speeds ranged from 3.8 to 5.8 m/s.

Concurrently, the study determined monthly average daily energy generation from different sizes of commercial wind machines (150, 250, 600 kW, etc.) to assess the impact of wind machine size on energy yield. The study also estimated annual energy production (MWh/year) from wind farms of different capacities (3, 6, 12, 24 MW, etc.) by utilising different commercial wind energy conversion systems (WECS). It was observed that, for a given 6 MW wind farm size, a cluster of 150 kW wind machines (at 50 m hub‐height) yielded about 32% more energy when compared to a cluster of 600 kW wind machines. The study also estimated the cost of wind‐based electricity (COE, US$/kWh) by using different capacities of commercial WECS. It was found that the COE per kWh is 0.045 US$/kWh for 150 kW wind machine (at 50 m hub‐height) whereas COE was 0.039 US$/kWh for 600 kW wind machine (at 50 m hub‐height). The study also dealt with wind turbine characteristics (such as capacity factor and availability factor). These characteristics are important indicators of wind turbine performance evaluation.     

沙漠地区边界层高度的提高与尘卷风起沙量的变化

在YSU（Yonsei University）边界层参数化方案的基础上,采用一种经验修正边界层RYSU（Revised YSU）方案,其模拟的边界层高度与观测相吻合.同时利用尘卷风起沙方案,获得了2019年腾格里沙漠夏季尘卷风起沙量的时空分布,结果表明,在08：00~18：00时,RYSU方案模拟的整点尘卷风瞬时起沙量和起沙范围均高于YSU方案,前者的起沙量和范围最大的时刻是15：00时,较后者迟1h,它与腾格里沙漠观测的尘卷风出现频率更接近.采用RYSU方案6~8月研究区每日的总起沙量几乎是采用YSU方案的3倍左右,RYSU方案估算的最大瞬时起沙量比YSU方案更接近用观测的边界层最大高度计算的值.     

Dynamic Performance of Horizontal Flexible Anchor Lines During Fall Arrest— A Numerical Method of Simulation

Designing fall arrest systems, which contain horizontal flexible anchor lines is an important technical problem related to the safety of people who work at a height and need horizontal freedom of movement. The article presents a numerical simulation of the dynamic performance of horizontal flexible anchor lines during fall arrest. The model of a 2-component system—a horizontal flexible anchor line and a falling rigid mass, described with a second order non-linear differential equation—is the main element of this method. This method of simulation is realised by a computer program, which allows obtaining the most important data characterising a fall arrest. The article shows laboratory tests used for the verification of this method, which turned out to be a valuable source of information and which can be used for designing fall arrest systems.     

Dynamic Strength Tests for Low Elongation Lanyards

Lanyards are still important and common components of personal systems protecting against falls from a height. Experience with dynamic strength tests of lanyards indicates that test methods based on EN and ISO standards do not make objective assessment possible. This paper presents the results of theoretical and laboratory investigations of the performance of adjustable lanyards during fall arrest. The obtained results indicate that methods of testing and assessment based on those standards demonstrate considerable shortcomings when applied to low elongation lanyards. The assumptions for improved requirements and test methods of lanyards made of e.g., steel wire and aramid ropes are also presented.     

送风速度对多热源置换通风影响的数值模拟

通过建立多污染热源置换通风的三维数学模型,根据数值解分析送风速度对多污染源置换通风效果(热力分层高度、垂直温度梯度等)的影响,结果表明:送风速度的变化对多污染热源置换通风效果的影响是很大的。     

定性物理模拟FM上下V拔长圆柱体

采用定性物理模拟的方法对FM上下V锻造法锻件心部的应力状态进行了实验分析,得出了当上砧宽比W/D_0=0.34时,锻件心部处于三向压应力的结果。实验结果与定量物理模拟相吻合。     

氧化铁粒径对固体推进剂火焰特征参数影响的试验研究

针对5-氨基四氮唑/硝酸锶固体推进剂在实际应用中存在的推进剂火焰偏大、容易在灭火装置喷口处形成外喷火焰的问题,选用了微米氧化铁和纳米氧化铁作为催化剂,分别从火焰形态、质量损失速率、热释放速率、无量纲火焰高度模型几个角度开展研究,对比了两种不同粒径的氧化铁对5-氨基四氮唑/硝酸锶固体推进剂燃烧火焰的优化效果。根据燃烧试验结果,发现不论是富氧燃烧还是贫氧燃烧,在降低推进剂燃烧时的火焰高度方面,微米氧化铁均明显优于纳米氧化铁;在提高质量损失速率方面,微米氧化铁的加速效果也要优于纳米氧化铁。基于传统的液态燃料油池火发展的火焰高度预测模型,将无量纲火焰高度与热释放速率的分析关系应用到固体推进剂燃烧领域,考虑使用无量纲火焰高度的分析方法,对固体推进剂燃烧过程中的火焰高度进行预测,建立了5-氨基四氮唑/硝酸锶固体推进剂的无量纲火焰高度模型,发现不含氧化铁和含有氧化铁的5-氨基四氮唑/硝酸锶固体推进剂燃烧时的火焰高度与热释放速率的n次方成正比,该无量纲拟合可以对固体推进剂火焰高度进行预测。最终,得出了微米氧化铁比纳米氧化铁更适合作为催化剂被用于5-氨基四氮唑/硝酸锶推进剂中,有利于提高固体推进式灭火装置的灭火效果。