纳米铁酸镍的制备及可见光催化性能研究

利用水热法制备了纳米铁酸镍,表征了其微观结构和光谱性能,并以罗丹明B溶液作为目标污染物,研究了铁酸镍催化剂的可见光催化性能。结果表明:所制备铁酸镍的微观形貌为由直径200-300 nm左右的类似球形小颗粒组成的大颗粒,平均粒径为95.60 nm,在紫外-可见光谱区均有较强的光吸收。光催化过程中催化剂的适宜用量为0.05 g,少量H2O2的加入有助于提高罗丹明B溶液的降解率。催化剂用量为0.05 g,加入0.4 mL 30%的H2O2,降解50 mL 20 mg/L罗丹明B溶液,模拟太阳光照射240 min后降解率能够达到99.2%。在实际太阳光照射下,240 min后罗丹明B溶液的降解率可以达到85.2%。     

纳米Fe3O4/CeO2-H2O2非均相类Fenton体系对3,4-二氯三氟甲苯的降解

以浸渍法制备的新型纳米Fe3O4/Ce O2为催化剂,3,4-二氯三氟甲苯(3,4-DCBTE)为目标污染物,在Fe3O4/Ce O2-H2O2非均相类Fenton体系中对目标污染物的降解进行研究,考察催化剂的催化效果和温度、p H、H2O2投加量等因素对催化剂催化效果的影响.结果表明,以纳米Fe3O4/Ce O2作为催化剂的非均相类Fenton体系对3,4-二氯三氟甲苯的处理效果极佳;随着温度的升高,纳米Fe3O4/Ce O2的催化效果不断提高;在偏酸性环境中,p H越低催化效果越好,p H=2时反应去除效率可达96.67%;随着H2O2投加量的增加,3,4-二氯三氟甲苯的降解效率先提高后降低,投加量为15 mg·L-1时去除效果最好可达99.47%;随着催化剂投加量的增加,同样出现了处理效果先升高后降低的现象,投加量为0.5 g·L-1时催化效果最好可达99.64%.在以纳米Fe3O4/Ce O2为催化剂的非均相类Fenton体系中,3,4-二氯三氟甲苯的降解符合一级反应动力学,反应所需活化能较低只需30.26 k J·mol-1.     

BiOCl/SiO2/Fe3O4复合材料可见光催化去除水中亚甲基蓝

以FeCl_3·6H_2O、FeCl_2·4H_2O、(C_2H_5)_4SiO_4、Bi(NO_3)_3·5H_2O、KCl为主要原料,采用化学共沉淀法和水热法制备了BiOCl/SiO_2/Fe_3O_4光催化剂,并对其进行EDS、TEM、XRD、FT-IR、UV-Vis表征,最后通过亚甲基蓝降解实验,研究了催化剂在合成过程中pH及催化剂投加量对其光催化性能的影响.结果表明,在pH=6、催化剂初始投加量为0.5 g·L~(-1)时,对亚甲基蓝的可见光催化效果最佳,光照120 min后对10 mg·L~(-1)的亚甲基蓝溶液的脱色率达到93.2%.BiOCl/SiO_2/Fe_3O_4经过简单的无水乙醇和水洗后,可高效重复利用4次.综合表明,BiOCl/SiO_2/Fe_3O_4是一种在处理染料废水中具有应用前景的磁性光催化剂.     

TiO2/pg-C3N4复合催化剂的制备及光催化性能

通过简单的超声剥离分散和水热法,成功制得了具有多孔结构的TiO₂/pg-C₃N₄复合催化剂.利用XRD、SEM、TEM、UV-Vis DRS和PL对样品的形貌、结构及光学性能进行了表征.在模拟太阳光照射下,以RhB和MO为模拟污染物考察了TiO₂/pg-C₃N₄的光催化性能.结果表明：当TiO₂占pg-C₃N₄的质量分数为5%时,制得的TiO₂/pg-C₃N₄（5：100）复合催化剂具有最优的光催化性能.TiO₂/pg-C₃N₄（5：100）对RhB的光催化降解途径为O^2·-和h⁺使整个共轭发色团结构发生裂解.TiO₂/pg-C₃N₄（5：100）光催化性能的提高一方面是由于多孔结构增加了光催化反应的活性位点;另一方面是由于TiO₂与pg-C₃N₄之间形成了Z型异质结,与传统的Ⅱ型异质结相比,该复合催化剂不仅使光生载流子分离效率提高,同时保留了pg-C₃N₄导带电子的强还原性和TiO₂价带空穴的强氧化性.     

MoS2/BiOI复合光催化剂制备及其光催化氧化还原性能

通过两步法合成花状MoS_2/BiOI复合光催化剂,采用X射线衍射(XRD)、扫描电镜(SEM)、紫外可见漫反射(UVVis)、光电子能谱(XPS)等方法对合成的样品进行了表征,对其可能的形成机制进行探究,通过电化学表征计算出BiOI与MoS_2的价带与导带位置,显示复合材料形成了1型异质结.同时以罗丹明B(RhB)与含Cr6+溶液作为目标污染物测试光催化剂的氧化还原性能,相比于BiOI和MoS_2单体,MoS_2/BiOI复合光催化剂表现出更强的光催化氧化与还原能力,其中以质量分数为2%的MoS_2与BiOI复合光催化剂效果最佳,可见光照20 min后RhB降解率达到98.92%,80 min后Cr6+溶液光催化还原率可达到97.87%,较纯BiOI分别提高了1.79倍与3.85倍,且经过4次重复利用后仍具有较高的光催化活性.光催化降解Rh B过程中空穴(h+)与超氧自由基(·O-2)作为主要活性物种,其中空穴影响更为显著.     

光催化剂AgBr/Ag2MoO4@AgVO3的结构表征及其抗菌防污性能

目的制备新型的光催化复合材料,提高其光催化性能。方法通过水热法和原位生长法制备不同摩尔比的AgBr/Ag_2MoO_4@AgVO_3光催化剂。采用X射线衍射(XRD)、扫描电镜(SEM)和高分辨透射电子显微镜(HRTEM)等一系列手段对所制备的光催化剂进行表征,并以可见光为光源,有机污染物罗丹明B(RhB)为降解对象,进行光催化活性测试,考察不同复合量的光催化剂对反应活性的影响。同时,以铜绿假单胞菌细胞、金黄色葡萄球菌和大肠杆菌为模式菌,进行抗菌试验考察光催化剂的杀菌性能。结果该复合材料通过AgVO_3的(501)晶面、Ag_2MoO_4的(311)面和AgBr的(200)晶面紧密连接。在罗丹明B(RhB)溶液中加入该复合材料,120 min内降解率达到了94.9%,而纯AgVO_3的降解率为7.8%,说明复合后的材料光催化性能明显提高。此外,在光催化杀菌实验中,超过99.99%的大肠杆菌、金黄色葡萄球菌和铜绿假单胞菌细胞均在90 min内被杀死。结论复合后的AgBr/Ag_2MoO_4@AgVO_3异质结光催化剂具有优异的光催化降解性能、杀菌性能和稳定性,该催化剂对于环境污染的治理以及海洋杀菌防污处理都起到一定的作用。     

Fenton反应及其参与的光催化体系的机理研究进展

综述了光催化降解有机污染物和杀菌的机理,其中降解有机物机理的主要内容为空穴和羟基自由基(·OH)氧化分解有机污染物,杀菌机理与降解有机物类似,即电子和空穴或含氧自由基攻击细菌的细胞壁、细胞膜和胞内成分,使细菌失活。分别从Fe~(2+)和Cu~(2+)两种离子介导的Fenton反应总结了Fenton反应的机理,得出两种离子介导的Fenton反应具有类似机理的结论。最后阐述了目前在光催化体系中引入Fenton反应的研究现状及作用机理,发现将Fenton反应引入光催化体系是促进光催化活性的有效途径。     

炮采放顶煤采空区自然发火的数值模拟应用

针对炮采放顶煤开采采空区容易发生自燃问题，基于漏风渗流方程、气体渗流一扩散-氧消耗方程，建立了采空区自然发火非稳定数值模型，采空区按非均质考虑，耗氧汇按煤矸氧化和瓦斯涌出稀释两方面综合考虑，用有限元数值方法联立求解模型。结合羊草沟矿实例，通过该矿自然发火后来的测试区的现场实测结果，拟合反演得到采空区煤的耗氧速度、瓦斯涌出强度和渗透特征参数，用确定的模型分析了前段出现自然发火的原因；描绘了炮采放顶煤开采时采空区冷却带、自燃带和窒息带等三带的形状，指出冒落压实的不均衡的非均质采空区，自燃点在偏人风一侧。用三带划分理论讨论了工作面参数（风量、推进度、控顶距）同自燃的量化关系，提出了从根本上预防采空区自然发火的途径与方法。     

TiO2/SiO2催化剂光催化降解罗丹明B的表观动力学

采用多孔硅胶为载体的TiO₂/SiO₂光催化剂,建立了三相内循环流化床光催化氧化体系,并以罗丹明B染料为典型污染物,研究其降解规律.通过对罗丹明B降解过程的表观动力学研究,发现在该体系中罗丹明B的降解并不符合Langmuir-Hinshelwood反应动力学模型.实验表明,其降解反应动力学符合双曲型模式,即降解率的倒数1/X和时间的倒数1/t成线性关系.反应速率常数与反应物初始浓度无关,与光源强度和相对体积能量吸收速率成正比.将不同实验条件下的罗丹明B的降解率实测值与模型计算值相比较,二者能很好吻合,平均相对偏差仅为3.25%.     

Ecotoxic Effect of Photocatalytic Active Nanoparticles (TiO2) on Algae and Daphnids (8 pp)

Background, Aim and Scope Due to their large potential for manifold applications, the use of nanoparticles is of increasing importance. As large amounts of nanoparticles may reach the environment voluntarily or by accident, attention should be paid on the potential impacts on the environment. First studies on potential environmental effects of photocatalytic TiO2 nanoparticles have been performed on the basis of widely accepted, standardized test systems which originally had been developed for the characterization of chemicals. The methods were adapted to the special requirements of testing photocatalytic nanoparticles. Materials and Methods: Suspensions of two different nanoparticles were illuminated to induce their photocatalytic activity. For testing, the growth inhibition test with the green alga Desmodesmus subspicatus and the immobilization test with the daphnid Daphnia magna were selected and performed following the relevant guidelines (algae: ISO 8692, OECD 201, DIN 38412-33; daphnids: ISO 6341, OECD 202, DIN 38412-30). The guidelines were adapted to meet the special requirements for testing photocatalytic nanoparticles. Results: The results indicate that it is principally possible to determine the ecotoxicity of nanoparticles. It was shown that nanoparticles may have ecotoxicological effects which depend on the nature of the particles. Both products tested differ in their toxicity. Product 1 shows a clear concentration-effect curve in the test with algae (EC50: 44 mg/L). It could be proven that the observed toxicity was not caused by accompanying contaminants, since the toxic effect was comparable for the cleaned and the commercially available product. For product 2, no toxic effects were determined (maximum concentration: 50 mg/L). In the tests with daphnids, toxicity was observed for both products, although the concentration effect-curves were less pronounced. The two products differed in their toxicity; moreover, there was a difference in the toxicity of illuminated and non-illuminated products. Discussion: Both products differ in size and crystalline form, so that these parameters are assumed to contribute to the different toxicities. The concentration-effect curves for daphnids, which are less-pronounced than the curves obtained for algae, may be due to the different test organisms and/or the differing test designs. The increased toxicity of pre-illuminated particles in the tests with daphnids demonstrates that the photocatalytic activity of nanoparticles lasts for a period of time. Conclusions: The following conclusions can be drawn from the test results: (I) It is principally possible to determine the ecotoxicity of (photocatalytic) nanoparticles. Therefore, they can be assessed using methods comparable to the procedures applied for assessing soluble chemicals. - (II) Nanoparticles may exert ecotoxicological effects, which depend on the specific nanoparticle. - (III) Comparable to traditional chemicals, the ecotoxicity depends on the test organisms and their physiology. - (IV) The photocatalytic activity of nanoparticles lasts for a relevant period of time. Therefore, pre-illumination may be sufficient to detect a photocatalytic activity even by using test organisms which are not suitable for application in the pre-illumination-phase. Recommendations and Perspectives: First results are presented which indicate that the topic 'ecotoxicity and environmental effects of nanoparticles' should not be neglected. In testing photocatalytic nanoparticles, there are still many topics that need clarification or improvement, such as the cause for an observed toxicity, the improvement of the test design, the elaboration of a test battery and an assessment strategy. On the basis of optimized test systems, it will be possible to test nanoparticles systematically. If a potential risk by specific photocatalytic particles is known, a risk-benefit analysis can be performed and, if required, risk reducing measures can be taken.