Applying Zonation Methods and Tabu Search to Improve the Ground‐Water Modeling1

Abstract: An optimization procedure combining zonation methods with the Tabu Search method is proposed to identify the spatial distribution of hydraulic conductivity field. Three zonation methods, Voronoi diagram (VD), multiplicatively weighted Voronoi diagram (MWVD), and pattern zonation are adopted for the parameterization purposes. With the consideration of the homogeneity and the heterogeneity, there are four spatial distributions of hydraulic conductivity designed to test whether the parameter structure can be successfully identified. The fitting residual error is first considered to determine an adequate number of zones without over parameterization. Then, the parameter uncertainty is evaluated the decision of the number of zones. The results indicate that the MWVD performs better than other two methods because the MWVD has better flexibility in describing the zonal boundaries with small number of decision variables.     

OPTIMUM DESIGN OF BORDER IRRIGATION SYSTEM1

ABSTRACT: Border irrigation systems like most of the other surface irrigation systems, do not need too much energy and special equipment. Thus, many farmers have used this system for a long time. On the other hand, design of surface irrigation systems including border irrigation requires many input parameters, and need intensive engineering calculations. The burden of these requirements probably led the users to experimental design of the systems with low efficiencies. However, accurate design and high quality optimization of the border irrigation system that can result in a highly efficient system is possible. In this study, an optimization model for border irrigation system is presented. The Hook Jeev's pattern search optimization method in conjunction with a general mathematical model of border irrigation is used to maximize the irrigation application efficiency. The border irrigation storage and distribution efficiencies, border slope and length, inflow rate, cutoff time, and the Manning's roughness coefficient are selected as constraints. The model is applied to field-measured data. The results show that it is possible to select a suitable combination of the border system's parameters (border's length, inflow rate, and cutoff time) to obtain a maximum application efficiency.     

Role of information in collective action in dynamic disaster environments

This study explores the major issues facing collective response operations after destructive earthquakes. The small-n case study design employs qualitative and quantitative methods to investigate the decision-making process in a context of seismic risk to exemplify how public managers can utilise information and communication systems to ensure collaborative actions in managing an extreme event. Fifty-eight semi-structured interviews with 39 key decision-makers and researchers and content analyses of daily reports from Cumhuriyet comprise the main data sources. The study compares and contrasts the Turkish disaster management system following the Marmara and Duzce earthquakes of 1999. It addresses whether the use of information and communication technologies significantly affected its performance. The study's findings reveal that difficulties in accessing and exchanging timely and accurate disaster-relevant information inhibited coordination during the Marmara response while increased communication functions improved coordination and search-and-rescue activities during the Duzce response.     

A study on experts' judgement on the future perspective of a country: a case study for China

The future of the environment in China until the year 2050 has been forecasted through a heuristic approach. A questionnaire survey was given to a group of Japanese experts concerning 47 selected indices, including past data and reference data about other countries. The indices were related to aspects of the economy, population, food, energy, transportation, and the environment. The experts were requested to plot a graph for each index up to 2050 based on their intuition. The lines drawn by 60 experts were compiled along with their comments, and the characteristics of each index were analyzed. Different values for the indices regarding transportation and per capita GDP were forecasted by the experts, while rather similar values were obtained for those referencing population and food consumption. The respective fields of the experts were found to affect their perspectives on the future. Economists tended to show rather optimistic views, expressing a business-as-usual scenario, while engineers predicted limited growth but technological innovation.     

IMPLEMENTATION OF AN OPTIMIZATION MODEL FOR OPERATION OF A METROPOLITAN RESERVOIR SYSTEM1

ABSTRACT: A deterministic dynamic programming optimization model with a refining sectioning search procedure is developed and implemented to find least cost withdrawal and release patterns for water supple from a multiple reservoir system serving a metropolitan area. Applications are made to teh four reservoir system operated by the city of Dallas, Texas. A realistic cost structure, including nonlinear power consumption, block rate unit power costs, and flow dependent power consumption for intracity water distribution, is utilized. Applications are made to find least cost operating patterns and, as well, by inclusion of a water loss penalty function, supply patterns which will reduce evaporation water losses for the Dallas system.     

EVALUATION OF METHODS FOR ESTIMATING STREAM WATER QUALITY PARAMETERS IN A TRANSIENT MODEL FROM STOCHASTIC DATA1

ABSTRACT: In this study the estimation of parameters in water quality models represented by linear first order partial differential equations is investigated. Two sets of simulated input-output data, one with input noise and the other with output measurement error, were used. The parameters were estimated by a gradient technique (Bard's method) and a pattern search technique. The results indicate that the output measurement error significantly affects the values of parameter estimates as compared to the noise added to the input. Bard's method consistently gave results with a smaller sum of square value.     

SPATIAL VARIABILITY IN WATER‐BALANCE MODEL PERFORMANCE IN THE CONTERMINOUS UNITED STATES1

ABSTRACT: A monthly water‐balance (WB) model was tested in 44 river basins from diverse physiographic and climatic regions across the conterminous United States (U.S.). The WB model includes the concepts of climatic water supply and climatic water demand, seasonality in climatic water supply and demand, and soil‐moisture storage. Exhaustive search techniques were employed to determine the optimal set of precipitation and temperature stations, and the optimal set of WB model parameters to use for each basin. It was found that the WB model worked best for basins with: (1) a mean elevation less than 450 meters or greater than 2000 meters, and/or (2) monthly runoff that is greater than 5 millimeters (mm) more than 80 percent of the time. In a separate analysis, a multiple linear regression (MLR) was computed using the adjusted R‐square values obtained by comparing measured and estimated monthly runoff of the original 44 river basins as the dependent variable, and combinations of various independent variables [streamflow gauge latitude, longitude, and elevation; basin area, the long‐term mean and standard deviation of annual precipitation; temperature and runoff; and low‐flow statistics (i.e., the percentage of months with monthly runoff that is less than 5 mm)]. Results from the MLR study showed that the reliability of a WB model for application in a specific region can be estimated from mean basin elevation and the percentage of months with gauged runoff less than 5 mm. The MLR equations were subsequently used to estimate adjusted R‐square values for 1,646 gauging stations across the conterminous U.S. Results of this study indicate that WB models can be used reliably to estimate monthly runoff in the eastern U.S., mountainous areas of the western U.S., and the Pacific Northwest. Applications of monthly WB models in the central U.S. can lead to uncertain estimates of runoff.     

IMPROVING AQUATIC HABITAT CONDITIONS OVER TIME WHILE PRODUCING WOOD PRODUCTS: AN EXAMINATION OF OPTIONS1

ABSTRACT: A land management activity scheduling model that can perform a multi-period, simultaneous evaluation of aquatic habitat quality and commodity production goals was used to identify alternatives which would allow the improvement of aquatic habitat conditions over time, while producing wood products. The scheduling model has the ability to use stream sediment index levels, stream temperature index levels, and equivalent clearcut acres (ECA) levels as primary goals. A secondary goal imbedded in the model is the achievement of an even-flow of timber harvest volume, and a tertiary goal is the achievement of maximum efficiency (maximum net present value). The scheduling model utilizes a heuristic programming technique (Tabu search) to guide the selection of timber harvests and road standards. A 14,643 acre case study watershed in eastern Oregon is used to illustrate several policy scenarios. Activities considered include: clearcutting and partial cutting; cable, skyline, ground-based, and helicopter logging; road obliteration; requiring lower truck tire pressures on forest roads; and tree planting in riparian areas. The scheduling model produced land management plans which were spatially and temporally feasible over ten ten-year time periods. Stream temperature was shown to be dramatically reduced if tree planting is performed in all riparian areas, regardless of whether harvesting activities occurred, and including meadows and forested areas where shade density is low. Timber harvest volume levels decreased 31 to 43 percent, and net present value levels decreased 36 to 46 percent, from an unconstrained case, when any of the following occurred: ECA was constrained to 15 percent, sediment index levels were required to decrease by 1 percent per decade, or temperature levels were constrained to “no harvest” levels. The use of a heuristic programming technique is a departure from traditional techniques that are commonly used in management plan development. Yet the heuristic technique allows the inclusion of complex management goals, many of which may be prohibited when using more traditional mathematical programming techniques. In addition, decision variables which require spatial information, requiring them to take on integer or non-linear representations, can be accounted for without realizing the limitations of the traditional techniques.     

城市生活垃圾收运路线优化的数学模型与算法

给出了城市生活垃圾收运路线优化问题的一般描述,考虑时间窗、车容量等约束,以收运路线总行程最短为目标。建立了该优化问题的数学模型。设计了求解谊问题的单一组合邻域搜索算法。随机邻域搜索算法和变邻域搜索算法三种类型的邻域搜索算法。通过对多组算例的求解实验,结果表明变邻域搜索算法的优化效果明显优于其余类型的邻域搜索算法。     

Homology and phylogeny and their automated inference

The analysis of the ever-increasing amount of biological and biomedical data can be pushed forward by comparing the data within and among species. For example, an integrative analysis of data from the genome sequencing projects for various species traces the evolution of the genomes and identifies conserved and innovative parts. Here, I review the foundations and advantages of this "historical" approach and evaluate recent attempts at automating such analyses. Biological data is comparable if a common origin exists (homology), as is the case for members of a gene family originating via duplication of an ancestral gene. If the family has relatives in other species, we can assume that the ancestral gene was present in the ancestral species from which all the other species evolved. In particular, describing the relationships among the duplicated biological sequences found in the various species is often possible by a phylogeny, which is more informative than homology statements. Detecting and elaborating on common origins may answer how certain biological sequences developed, and predict what sequences are in a particular species and what their function is. Such knowledge transfer from sequences in one species to the homologous sequences of the other is based on the principle of 'my closest relative looks and behaves like I do', often referred to as 'guilt by association'. To enable knowledge transfer on a large scale, several automated 'phylogenomics pipelines' have been developed in recent years, and seven of these will be described and compared. Overall, the examples in this review demonstrate that homology and phylogeny analyses, done on a large (and automated) scale, can give insights into function in biology and biomedicine.