碱性氧化焙烧回收含铬污泥中的铬

采用碱性氧化焙烧工艺回收含铬污泥中的铬,以浸出渣作为焙烧填料,最佳工艺条件为：含铬污泥加入量10g,浸出渣加入量8g,焙烧温度700℃,焙烧时间40min,n（Cr2O3）：n（NaNO3）：n（Na2CO3）：n（NaOH）=1：2：3．5：10。在此条件下,碱性氧化焙烧工艺铬浸出率高达98％以上。     

Heavy metal removal and cyanide destruction in the metal plating industry: an integrated approach from egypt

Wastewater produced from a metal plating is a major environmental problem. Industrial auditing revealed that the main source of pollution mainly originated from rinsing water. The characterization of final effluent showed that it is highly contaminated with hazardous heavy metals and cyanide. The concentration of copper, hexavalent chromium, nickel, and cyanide in the rinsing water of metal plating department was 14.8, 40.9, 13.3, and 19 mg/l, respectively. The concentration of cyanide and zinc from the galvanizing department reached 60 and 80 mg/l. The remediation scheme included the application of in-plant control measures via changing the rinsing process followed by the destruction of cyanide and reduction of hexavalent chromium bearing wastes. The pretreated wastes were then mixed with other industrial wastes prior to a combined chemical coagulation-sedimentation using lime and/or lime in combination with ferric chloride. The results indicated that, after applying the waste minimization measures alone at the source, prior to final treatment of industrial waste, removal rates of cyanide, copper, nickel, and chromium concentrations were 23.2%, 14.9%, 32.3%, and 55.3%, respectively in the rinse water from metal plating department. Furthermore, the removal rates of cyanide and zinc in the galvanizing department reached 59.7% and 24.3. The integrated control measures and treatment scheme led to more than 99% removal of copper, nickel, chromium, and zinc, while the complete removal of cyanide was achieved in the final effluent.     

土壤总铬测定方法的改进

硝酸－－硫酸－－磷酸消解,高锰酸钾氧化,二苯碳酰二肼分光光度法检测土壤总铬是土壤总铬检测方法之一。文章在上述方法原理基础上通过实验进一步研究建立新方法。该方法检出限低0．075μg,灵敏度、准确度高,精度小于等于3％。新方法操作更科学,降低实验成本、省力、省时、准确、快捷。