污泥过热蒸汽干燥单因素试验

为了研究污泥常压过热蒸汽干燥过程中各干燥因素对干燥性能指标的影响规律,研制了一套污泥常压过热蒸汽干燥试验装置。利用研制的过热蒸汽干燥试验装置进行了不同温度、污泥质量和蒸汽流量的干燥试验。试验结果表明:蒸汽温度在180~260℃,污泥质量在6~30 g,蒸汽流量在18~40 m~3/h时,随着过热蒸汽温度升高、蒸汽流量增大,相对单位能耗值均是先减小后增大,平均干燥强度一直增大;随着污泥质量增大,相对单位能耗是先减小后增大,平均干燥强度一直减小。     

Fe对污水和污泥处理过程中微生物和工艺性能的影响

铁元素作为微生物体内生化所必须的微量元素,影响微生物的生长及污水处理效果。分析了污水和污泥处理过程中,不同浓度和不同价态Fe促进微生物酶的合成和酶促反应的机理,概括了可能导致的微生物群落结构改变的因素;总结了Fe对EPS的分泌、絮体结构的影响,以及Fe加速生物膜的形成和污泥颗粒化的原理。从工艺角度总结了铁元素对UASB、MBR、污泥厌氧消化和生物制氢等工艺的作用,旨在为未来Fe及其他金属元素促进污水处理中微生物活性技术的研究提供思路及借鉴。     

Anaerobic digestion in mesophilic and room temperature conditions: Digestion performance and soil-borne pathogen survival

Tomato plant waste(TPW) was used as the feedstock of a batch anaerobic reactor to evaluate the effect of anaerobic digestion on Ralstonia solanacearum and Phytophthora capsici survival. Batch experiments were carried out for TS(total solid) concentrations of 2%, 4% and 6% respectively, at mesophilic(37 ± 1°C) and room(20–25°C) temperatures. Results showed that higher digestion performance was achieved under mesophilic digestion temperature and lower TS concentration conditions. The biogas production ranged from 71 to 416 L/kg VS(volatile solids). The inactivation of anaerobic digestion tended to increase as digestion performance improved. The maximum log copies reduction of R. solanacearum and P. capsici detected by quantitative PCR(polymerase chain reaction) were 3.80 and 4.08 respectively in reactors with 4% TS concentration at mesophilic temperatures. However, both in mesophilic and room temperature conditions, the lowest reduction of R. solanacearum was found in the reactors with 6% TS concentration, which possessed the highest VFA(volatile fatty acid) concentration. These findings indicated that simple accumulation of VFAs failed to restrain R. solanacearum effectively, although the VFAs were considered poisonous. P. capsici was nearly completely dead under all conditions. Based on the digestion performance and the pathogen survival rate, a model was established to evaluate the digestate biosafety.     

密闭空间内可燃液体蒸气爆炸强度研究

采用20 L球燃爆实验装置,研究分析了油气浓度、点燃延迟时间的变化对油气环境的爆炸影响因素及变化规律。研究表明,随着油气浓度的增加,油气最大爆炸压力呈现先上升后下降的趋势,点燃延时影响油气-空气混合物爆炸强度,超过一定时间后爆炸猛烈程度降低。     

A multilevel perspective of interpersonal trust: Individual,dyadic, and cross‐level predictors of performance

While it is generally known that interpersonal trust facilitates individual functioning, few studies have examined the role of specific features of the interpersonal trust network — individual, dyadic, third‐party, and network‐level features — on individual performance. We adopt a multilevel perspective of interpersonal trust to examine how individuals' performance is not only predicted by their individual‐level centrality in the interpersonal trust network but also moderated, at the network level, by the overall centralized nature of that network. Further, we examine whether mutual trust relationships at the dyadic level, as well as shared trust ties to common third parties, can predict individuals' performance. We test our hypotheses with 206 members in 15 professional networking groups and find that interpersonal trust operates at multiple levels to predict members' performance in terms of generating income from business referrals. These findings provide theoretical and practical implications on how interpersonal trust relationships operate and can be managed for performance gains. Copyright © 2016 John Wiley & Sons, Ltd.     

等离子喷涂制备 ZrB2-SiC 复合涂层及其静态烧蚀性能

目的提高C/C复合材料的抗静态烧蚀性能。方法利用大气等离子喷涂技术在C/C复合材料表面制备ZrB_2-SiC复合涂层,对其进行1500℃的静态烧蚀实验。利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)及能谱分析仪(EDS)对涂层的物相成分、微观形貌等进行检测分析。结果采用大气等离子喷涂制备的ZrB_2-SiC涂层是由熔融的粉末粒子紧密堆积而成,呈现典型的层状结构,涂层均匀完整地覆盖于C/C基体表面,厚度约为200μm。涂覆有ZrB_2-SiC复合涂层的C/C复合材料试样在1500℃分别氧化2,3,4 h后,试样依旧保持完整,C/C基体未遭受损伤,试样的质量增加率依次为3.39%,2.95%,4.25%。结论采用大气等离子喷涂技术能够在C/C复合材料表面制备出厚度均匀、结构致密的ZrB_2-SiC复合涂层,ZrB_2-SiC复合涂层使C/C复合材料的抗静态烧蚀性能显著提高。     

功能化层状复合材料的制备及其电催化性能

目的制备一种新型功能化离子液体修饰层状复合材料,研究其对L-酪氨酸(L-Tyr)的电催化氧化行为。方法通过静电自组装方式将氮氧自由基功能化离子液体(TEMPO-IL)与钙铌酸钾(KCa_2Nb_3O_(10))进行复合,并运用XRD,FTIR,SEM,HRTEM等测试手段对所作材料的微观形貌和结构进行分析表征。另外,将其作为电极修饰剂修饰于电极表面通过电化学工作站测试其电化学性质。结果该修饰电极对于电催化氧化L-Tyr有着较高的电化学活性。同时实验还表明,当L-Tyr的浓度在1×10~(-4)~1.16×10~(-2) mol/L之间时,峰电流值与L-Tyr浓度呈良好的线性相关,检测下限为6.2×10~(-5) mol/L(信噪比为3)。结论静电自组装是一种能够快捷、高效的制备层状复合材料方法,且得到的复合材料显示出在生物传感器方面的应用前景。     

不同碳源条件下污水生物脱氮过程中N_2O的释放规律

以3类常用的碳源(乙酸钠、葡萄糖和甲醇)为研究对象,在3个稳定运行的SBR系统内考察了碳源种类对污水生物脱氮过程中N_2O释放的影响。结果显示,各系统内N_2O的释放主要发生在好氧硝化阶段,且在以乙酸钠为碳源的系统内氨氧化速率最快,TN去除率最大,但同时N_2O的释放速率、累积释放量(4.44 mg)和转化率(1.3%)也最大。而以甲醇为碳源的小试系统脱氮效果较差,TN去除率仅为59.5%,但N_2O的释放速率、累积释放量和转化率均最低。在实际污水处理过程中,当以温室气体N_2O释放作为判断标准时,此研究结果可为碳源的选择提供依据。     

保护层开采工作面采空区瓦斯分层治理

为实现保护层开采工作面生产过程中瓦斯不超限,在分析工作面瓦斯来源的基础上,提出了保护层开采工作面竖向分层治理瓦斯的思路。根据相似模拟结果,分析了采空区瓦斯流动范围和流动范围内孔隙率、风阻分布特征。采用数值模拟分析了Y型通风、Y型通风+采空区埋管及Y型通风+采空区埋管+高抽巷+高位钻场3种瓦斯治理方式下采空区瓦斯体积分数场,结果表明:采空区瓦斯体积分数在竖直方向和水平方向均具有典型的递变特征,距工作面越远,距煤层越高,瓦斯体积分数越大;合适位置的煤层顶板高抽巷对抽采来自上邻近层的瓦斯具有较好的效果,试验条件下高抽巷抽采瓦斯量达到了总量的36.4%~63.6%;沿充填墙的采空区埋管不能完全拦截下层采空区进入沿空巷的采空区瓦斯,随沿空巷长度增加,瓦斯体积分数增大,建议沿空巷长度控制在250 m范围内。     

The velocity of DNAPL fingering in water-saturated porous media: laboratory experiments and a mobile–immobile–zone model

Dense nonaqueous phase liquids (DNAPLs) are immiscible with water and can give rise to highly fingered fluid distributions when infiltrating through water-saturated porous media. In this paper, a conceptual mobile–immobile–zone (MIZ) model is presented to describe the structure of a DNAPL finger in water-saturated porous media and the velocity of finger propagation. A finger is composed of a finger body and a tip. The finger body has a mobile core and an immobile sheath. All the DNAPL within the tip of a finger is mobile. Lab experiments utilizing image analyses of a DNAPL (PCE) penetrating into water-saturated homogeneous glass beads were carried out in a two-dimensional transparent chamber. The results show that the fingers elongated almost linearly with time. The fingers did not grow laterally after the tip of the finger had passed. The average finger diameters were between 3.9 and 5.4 mm for PCE propagation in water-saturated glass bead porous media with mean particle diameters from 0.32 to 1.36 mm. The estimated mobile core diameters were 51–60% of the average finger diameters.