环境模型的统计评价

系统地探讨了评价模型的统计指标,并在BOD反应动力学模型中使用,取得了较好的效果。     

Results of a questionnaire investigation on the management of environmental issues during conceptual design. A case study of two large made-to-order companies

This paper investigates the current treatment of environmental issues by two companies within the large made-to-order sector. Fifty questionnaires were issued to the design team of each company to assess current practice in the integration of environmental issues with design activities, awareness of environmental issues, awareness of existing environmental design tools and the preferred format for a potential clean design tool.     

高强铝合金超塑挤压成形

主要介绍了工业牌号高强铝合金在供应态或经简单预处理后在通用油压机上超塑成形的实例,并分析探讨了非理想组织材料超塑成形中微观组织的变化。     

高等职业教育教学管理基本特征初探

教学管理和教学过程一样,也是一个复杂的过程。不同的社会背景、不同的教育类型和不同的教育层次,教育管理的目标、方法、手段等是有区别的。本文是作者在多年高职高专教育教学管理实践的基础上,形成的关于高职高专教育教学管理基本特征的一些初步认识,发表于此,以期得到同行们的指正。     

基于风险的检验在高温高压管廊蒸汽管道的应用

高含硫天然气净化装置高温高压管廊蒸汽管道由于不能停车,在现有技术条件下无法开展全面检验,存在安全运行的风险。简述了基于风险的检验技术的基本理念。讨论了蒸汽管道开展基于风险的检验的合规性、损伤模式及机理、风险评估方法和程序。通过综合考虑失效可能性和失效后果,制定最优检验策略并实施,解决了高温高压管廊蒸汽管道到期不能检验的问题,及时发现隐患并整改,确保管道合法合规安全运行。研究结果表明,采用基于风险的检验技术,既能节约大量的停车和检验维修费用,又能有效地提高重点设备管线的安全性和管理水平。     

微生物絮凝剂的开发与应用

概述了微生物的定义和特点,以及微生物絮凝剂的研究现状,并介绍了微生物絮凝剂的絮凝机理,影响絮凝剂絮凝能力的因素及其在水处理中的开发与应用.     

低温高铁锰氨氮地下水两级生物净化快速启动

为了实现东北地区低温（5~6℃）高铁、锰、氨氮（TFe：9~15mg/L，Fe²⁺：6~12mg/L，NH₃-N：1.4~2.0mg/L，Mn²⁺：1.4~2.0mg/L）地下水的净化及解决同层净化中运行稳定性差、出水锰超标的问题，在水厂净化车间开展“两级曝气+两级过滤”工艺启动研究，采用差滤速和同滤速2种启动方式分别启动两级生物净化工艺.结果表明，2种启动方式分别在106，59d启动成功.同滤速启动可以有效的缩短两级生物净化的启动时间，铁、锰、氨氮去除负荷可达110.69，18.80，19.54g/（m²·h），沿程分析发现，铁在一级滤柱的60cm处即被去除至痕量；85.08%的氨氮在一级滤柱中去除，沿程各段去除均匀，14.92%的氨氮在二级滤柱中去除；锰的去除率和氧化活性去除区位受滤速及进水氨氮浓度影响较大，33.72%的锰在一级滤柱中去除，66.28%的锰在二级滤柱中去除，锰的去除仍然是滤池成熟的决定性因素.     

PAC—SBR法处理高浓度有机废水

针对高浓度有机废水无稀释好氧处理这一新领域中存在的某些问题，本文提出了ＰＡＣ—ＳＢＲ生化法。通过对ＰＡＣ—ＳＢＲ与ＳＢＲ这两个生化系统的生化效果、污泥负荷、污泥沉降性能、好氧速率、动力学常数测定以及活性炭（ＰＡＣ）吸附性能的试验比较，对这一新的生化系统有一个较全面的认识，为ＰＡＣ—ＳＢＲ技术在高浓度有机废水治理上的应用提供理论依据。     

Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporationinduced self-assembly(EISA) methods,respectively.The pore structures of CMK-3 and CFDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction,field emission scanning electron microscopy,transmission electron microscopy,and N_2 adsorption–desorption.Adsorption of NO was investigated by means of thermogravimetric analysis,temperature-programmed desorption of NO + O_2,and in situ diffuse reflectance Fourier transform infrared spectroscopy.The results show that the CMK-3 and C-FDU-15 materials possessed ordered and uniform structures.The coadsorption capacity of NO and O_2 decreased in the sequence CMK-3(88.6 mg/g) C-FDU-15(71.7 mg/g) AC(25.3 mg/g).There were two main adsorption species on CMK-3 and CFDU-15:nitrite and nitrate.Nitrite is converted to nitrate easily.However,the adsorption species were more complex on AC,with nitrite being the main species.Moreover,CMK-3 and C-FDU-15 exhibit excellent regeneration efficiency compared with AC.The excellent NO adsorption performance of CMK-3 and C-FDU-15 was associated with their ordered mesoporous structures and high surface areas.The research provides more options for NO adsorption in the future.     

高镁铝合金在喷射成形过程中显微组织的变化

研究了高镁铝合金在喷射成形过程中显微组织的变化。沉积态高镁铝合金基体呈全部等轴晶组织并存在少量显微孔洞是沉积态组织的主要特征。分析了等轴晶组织和显微孔洞在喷射成形中生成的机制。