关于中国西北地区沙尘暴及其黄沙气溶胶高空传输路线的探讨

本文扼要叙述了在中国西北和华北地区经常出现的沙尘暴及黄沙气溶胶（黄沙浮尘）的发生源和移动路线,并对１９９３年５月５日甘肃地区发生的沙尘暴及由此而产生的黄沙天气作了说明。     

Molecularly imprinted polymer for analysis of trace atrazine herbicide in water

A molecularly imprinted polymer (MIP) for atrazine was synthesized by non-covalent method. The binding capacity of MIP was 1.00 mg g^{? 1} polymer. The selectivity and recovery were investigated with various pesticides which are mostly, found in the environment, for both similar and different chemical structure of atrazine. The competitive recognition between atrazine and structurally similar compounds was evaluated and it was found that the system provided highest recovery and selectivity for atrazine while low recovery and selectivity were obtained for the other compounds. The highest recovery was obtained from MIP compared with non-imprinted polymer (NIP), a commercial C₁₈ and a granular activated carbon (GAC) sorbent. The method provided high recoveries ranged from 94 to 99% at two spiked levels with relative standard deviations less than 2%. The lower detection limit of the method was 80 ng L^{? 1}. This method was successfully applied for analysis of environmental water samples.     

高有机负荷冲击对填料型MBR运行性能的影响

针对分散式农村生活污水有机负荷变化明显的特点,研究了填料型厌氧-缺氧-好氧膜生物反应器（A²O-MBR）抗高有机负荷的能力,考察了高有机负荷冲击对污染物去除效果、悬浮和附着污泥性质以及膜污染的影响.结果表明,高负荷冲击期间污染物去除稳定,氨氮去除率在冲击第3d从99.1%下降到78.5%,出水氨氮浓度高于5mg/L,随后去除率恢复至97.6%;悬浮和附着微生物的三磷酸腺苷（ATP）含量增加;附着生物量显著增加;细胞外聚合物（EPS）增加;高有机负荷冲击期间膜污染更严重,膜面污染层EPS含量显著增加;太阳能微动力A²O-MBR系统能减少10%的碳排放.     

新型真空膜渗透结晶工艺初探

真空膜渗透结晶工艺(vacuum membrane percrystallization, VMPC)是一种新型膜结晶工艺,可同步实现溶质的结晶及其与溶剂的分离回收。以NaCl溶液为目标物系,对VMPC过程的原理进行了分析,初步考察了进料液温度、浓度和操作压力对该工艺产能的影响。结果表明：VMPC过程是膜渗透和真空压差闪蒸结晶的协同作用的过程,随进料液温度的升高,结晶盐通量和水通量均增大;随进料液浓度的升高,结晶盐通量增大,水通量降低;而操作压力对工艺产能影响较小,但对生成晶体的形貌影响显著;当进料液温度为34 ℃,进料质量分数为25%,操作压力为0.5 kPa时,可获得高达8.04 kg·(m²·h)⁻¹的盐通量和30 L·(m²·h)⁻¹的水通量,远高于现有太阳能驱动膜结晶技术的产能。针对现有膜滤浓缩液类高浓盐水结晶工艺流程复杂、能耗高、效率和产能低的问题,VMPC工艺为新型高效处置技术的开发及应用提供了可行的解决方案。     

二氧化碳转化制取燃料及高值化学品研究进展

二氧化碳(CO₂)的捕集及转化技术可将CO₂转化为清洁燃料和高值化学品,是未来缓解能源问题的有效途径之一。基于CO₂的转化机理,结合近几年CO₂转化技术的发展,重点介绍了催化转化、电化学还原、光化学转化、光电催化转化及生物转化技术制备CH₃OH、HCOOH、C₂H₆O、CH₃COOH等一系列高值化学品的研究进展;基于现有技术,通过进一步开发利用新型催化剂,培育优化具有CO₂转化功能的微生物等手段,将CO₂转化技术与多领域技术相结合发展,可为CO₂转化技术的大规模工业化生产及实际应用打下坚实的基础。     

雷州半岛地区磷肥高效利用技术及其应用

在研究雷州半岛土壤特殊的强固磷机理基础上，以改性的工农业废弃物作为活化剂，活化磷矿粉制得高效磷肥，不仅利用了废弃物资源，变废为宝，而且节省了硫酸资源，降低了肥料成本。在雷州半岛不同地区，以西瓜、甘蔗、辣椒、水稻为供试作物，以过磷酸钙为对照，在等质量(低成本)条件下进行了大量的田间试验，结果表明，除水稻产量持平外，其他作物均表现出明显的增产效果，增产幅度在3％-22％之间，且产品品质改善。因此，高效磷肥在雷州半岛地区有广阔的应用前景。     

Screening Capsicum chinense fruits for heavy metals bioaccumulation

Elevated concentrations of heavy metals in edible plants could expose consumers to excessive levels of potentially hazardous chemicals. Sixty-three accessions (genotypes) of Capsicum chinense Jacq, collected from 8 countries of origin were grown in a silty-loam soil under field conditions. At maturity, fruits were collected and analyzed for seven heavy metals (Cd, Cr, Ni, Pb, Zn, Cu, and Mo) concentrations. The main objectives of this investigation were: 1) to determine the concentrations of seven heavy metals in the soil and monitor their accumulation in mature fruits, 2) to categorize the pepper accessions as low or high heavy metal accumulators, and 3) to determine if heavy metal content of the pepper fruit was lower than the permitted limits. Concentrations and relative proportions of heavy metals in pepper fruits of C. chinense varied among accessions. Fruits of Plant Introduction (PI) 355820 accumulated significant concentrations of Cd (0.47 μ g g^?1dry fruit). PI-260522 accumulated the highest concentration of Pb (2.12 μ g g^?1 dry fruit) among the 63 accessions tested. This accession (PI-260522) contained about twice the Pb limit on a fresh weight basis. Among the 63 accessions analyzed, PI-238051 contained the highest levels of Ni (17.2 μ g g^?1). We concluded that high accumulator genotypes may be useful for phytoremediation, while, low accumulator accessions might be appropriate selections for growing on Cd-, Pb-, or Ni-contaminated soils to prevent potential human exposure to heavy metals and health hazards through the food chain.     

高应力巷道底臌变形机理及控制技术分析

为了分析高应力巷道底臌变形机理,以铜川玉华煤矿2407工作面巷道为研究背景,采用理论分析和现场观测相结合的研究方法。根据巷道底臌主要由原岩应力、支承应力、围岩遇水膨胀、流变作用而引起进行分析,推导出计算底臌量的表达式。针对玉华煤矿高应力巷道底臌变形,提出在巷道顶板采用锚网梁索支护,帮部采用锚网支护的原支护条件下,底板采用锚杆注浆和切槽联合支护方式控制底臌。现场观测结果表明:这种联合支护方式能够有效控制巷道底臌变形,底臌量降低了61.5%。将底臌量理论解与现场监测的结果进行比较,误差小于8.93%,验证了理论的合理性,为巷道底臌量分析提供了参考。     

普光气田集输管网系统安全运行实践

针对普光气田地理环境现状,从地质灾害、焊口缺陷、管道腐蚀等方面对集输管网安全隐患进行了分析,结合现有风险防控措施,对下一步工作进行了展望,提出应加强硫化氢泄漏扩散机理研究及环焊缝失效机理研究。     

Assessment of the clear-sky bias issue using continuous PM10 data from two AERONET sites in Korea

A bias in clear-sky conditions that will be involved in estimating particulate matter(PM)concentration from aerosol optical depth(AOD) was examined using PM_(10) from two Aerosol Robotic Network sites in Korea. The study periods were between 2004 and 2007 at Anmyon and between 2003 and 2011 at Gosan, when both PM_(10) and AOD were available. Mean PM_(10) when AOD was available(PM AOD) was higher than that from all PM_(10)data(PM all) by 5.1 and9.9 μg/m~3 at Anmyon and Gosan, which accounted for 11% and 26% of PM all, respectively.Because of a difference between mean PM_(10) under daytime clear-sky conditions(PM clear)and PM AOD, the variations in ΔPM_(10), the difference of PM all from PM clear rather than from PM AOD, were investigated. Although monthly variations in ΔPM_(10)at the two sites were different, they were positively correlated to those in ΔT, similarly defined as ΔPM_(10)except for temperature, at both sites. ΔPM_(10)at Anmyon decreased to a negative value in January due to an influence of the Siberian continental high-pressure system while ΔPM_(10)at Gosan was high in winter due to an effect of photochemical production at higher temperatures than at Anmyon.