废PE塑料溶剂法制氧化聚乙烯蜡

研究了在不同溶剂中以聚乙烯废塑料制高附加值氧化聚乙烯蜡产品的方法,测定了所得产物的分子量、酸值、软化点,并用IR考察了含氧基团。结果表明,溶剂A体系中能制备出颜色、分子量、酸值合格的低分子量氧化聚乙烯蜡,产品软化点在101～110℃,相对分子质量为1500,3000,酸值是12。以废塑料包装为原料,氧气做氧化剂下制得的氧化聚乙烯蜡的酸值最高。     

HDPE土工膜长期性能稳定性的研究进展

垃圾填埋场底部高密度聚乙烯(HDPE)土工膜会因氧化降解而使防渗性能降低,对环境带来二次污染风险,因此,HDPE膜的长期稳定性是值得关注的问题,但国内相关研究甚少。HDPE膜的降解过程可分为3个阶段,主要受自身性质、温度、接触介质和衬垫结构等因素的影响。文章重点综述了国外研究HDPE膜长期稳定性的试验方法,归纳了相关的数学模型,并根据存在的问题提出了建议。室内试验一般采用老化试验,包括浸泡试验和模拟试验,二者均能加快HDPE膜的老化进程。前者一般将试样完全浸泡于研究介质中试验,试验值较为保守;后者将样品置于模拟的衬垫构造中试验,结果更接近实际。数学模型采用Arrhenius模型,精度和所需参数取决于老化试验,现阶段大部分计算结果较片面,完善试验是后续工作的重点。     

高压聚乙烯反应单元火灾爆炸危险性分析及预防

运用道化学公司火灾爆炸危险指数评价（第7版）方法,针对管式法高压聚乙烯生产工艺的特点,计算分析安全措施补偿后的火灾爆炸指数,分析总结其火灾危险性,并提出了一些具体的防火防爆措施。     

有机污染物的被动采样材料-水分配系数的QSAR研究

污染物的被动采样材料-水分配系数(K_(PW))是衡量被动采样器性能和进行优化的一个重要指标,由于实验方法难以逐个测定众多污染物的K_(PW)值,有必要发展其KP W预测方法。本研究选取聚乙烯(PE)、聚丙烯酸酯(PA)和硅橡胶(SR)3类常用的被动采样材料共7种,采用多元线性回归分析方法构建可用于K_(PW)预测的定量构效关系(QSAR)模型。所构建的QSAR模型具有良好的拟合优度(R2a dj介于0.806~0.989)、稳健性(Q2L O O和Q2B O O T分别介于0.786~0.988和0.773~0.801)和预测能力(R_(ext)~2和Q_(ext)~2分别介于0.769~0.989和0.757~0.982),可以用于预测烷烃、烯烃、芳香类、醇类、酮类、酯类、醚类等多种有机污染物的log KP W值。有机污染物的log KP W与分子Mc Gowan体积(Vx)、氯原子个数(n Cl)、环周长(Rperim)、多重键个数(n BM)、N,O极性贡献的拓扑极性表面积(TPSA(NO))、[-N(=)=]结构个数(Ndds N)和羟基个数(nROH)等参数有关。     

食用油聚酯包装的生命周期评价

采用生命周期评价法研究了食用油聚酯(PET)包装的生命周期环境影响,并对不同处置方式的环境影响进行比较评价. 通过现场和资料调研的方式获得所有生命周期阶段的能量物质的输入、输出和环境外排数据. 结果表明:PET包装原料获取阶段的环境影响潜值在全生命周期环境影响潜值中所占比例极高,占处置前环境影响潜值的81.8%. PET包装的全生命周期环境影响类别主要集中在化石燃料、无机物对人体损害和气候变化3个方面;在致癌、生态毒性和酸化/富营养化等方面的影响较小. 3种主要处置方式的环境影响潜值为焚烧＞填埋＞再生,其中焚烧和填埋分别增加PET包装处置阶段前环境影响潜值的5.1%和3.6%,而再生可降低63.9%.      

Biofilm mediated degradation of commercially available LDPE films by bacterial strains isolated from partially degraded plastic

Biodegradation is an attractive approach for the elimination of synthetic polymers, pervasively accumulated in natural environments and generating ecological problems. The present work investigated the degradation of low‐density polyethylene (PE) by three Bacillus sp., that is, ISJ36, ISJ38, and ISJ40. The degree of biodegradation was assessed by measuring hydrophobicity, viability, and total protein content of bacterial biofilm attached to the PE surface. Although all three bacterial strains were able to establish an active biofilm community on the PE surface, ISJ40 showed better affinity toward PE degradation than the other two. Bacterial colonization and physical changes on the PE surface were visualized by scanning electron microscopy. Fourier transform infrared spectroscopy analysis revealed alteration in the intensities of functional groups along with an increase in the carbonyl bond indexes. The study results suggest that the Bacillus strain ISJ40 can be used as a potential degrader for the eco‐friendly treatment of PE waste.     

鄂尔多斯气田泥浆池防渗层对有害物质的阻滞作用评价

随着天然气勘探开发速度的加快,鄂尔多斯气田井场废泥浆产生量越来越大,固化处理后将其填埋于有防渗层的泥浆池中是目前该区域最常用的方法,但国内外就气田井场泥浆池防渗层对池内污染物实际阻滞效果的研究报道较少。为研究上述处理方法的实际环境效应,以2010年盆地内正在开发气井井场泥浆池内预固化处理沉淀物的分析结果为参照,选择其中污染程度较为严重的石油类、COD、硫化物和砷、钡、镍、铅、铜4种为重点污染物,选择2005—2009年分别投入使用的5个气田井场废弃泥浆池为考察对象,分析研究了防渗层投运时间对不同污染物阻滞作用的影响。结果表明,投运1年的防渗层可阻留污染物90%以上,投运2年以上的防渗层对污染物的阻滞作用有不同程度下降,投运5年的防渗层对所监测污染物的阻滞作用最好的是钡(40.14%)、最差的为硫化物(10.89%),结合不同时间防渗层破损状况和其对污染物的阻滞效率的变化情况,说明机械刺穿和不均匀降是导致防渗层在研究区域的环境下阻滞功能退化较快的主要原因。     

聚乙烯聚丙烯树脂及废料的热解

研究了聚乙烯聚丙烯树脂及废料的热解过程中,裂解温度对气相产物的收率及组成,液相产物的收率及汽油馏分、柴油馏分、重油馏分的分布,热解残碳收率的影响,将树脂与废料的热解产物及收率进行对比,结果显示：同一热解温度下,树脂与废料热解的液相产物组成及收率基本相同;树脂在４００℃～５００℃热解,液相产物的收率在９０％～９４％之间,无显著区别。     

Sorption kinetics of parent and substituted PAHs for low-density polyethylene (LDPE): Determining their partition coefficients between LDPE and water (KLDPE) for passive sampling

Low-density polyethylene (LDPE) has been widely used as a sorbent for passive sampling of hydrophobic organic contaminants (HOCs) in aquatic environments. However, it has seen only limited application in passive sampling for measurement of freely dissolved concentrations of parent and substituted PAHs (SPAHs), which are known to be toxic, mutagenic and carcinogenic. Here, the 16 priority PAHs and some typical PAHs were selected as target compounds and were simultaneously determined by gas chromatography–mass spectrometer (GC–MS). Some batch experiments were conducted in the laboratory to explore the adsorption kinetics of the target compounds in LDPE membranes. The results showed that both PAHs and SPAHs could reach equilibrium status within 19–38?days in sorption kinetic experiments. The coefficients of partitioning between LDPE film (50?μm thickness) and water (K_LDPE) for the 16 priority PAHs were in good agreement with previously reported values, and the values of K_LDPE for the 9 SPAHs are reported in this study for the first time. Significant linear relationships were observed, i.e., log K_LDPE?=?0.705?×?log K_OW?+?1.534 for PAHs (R²?=?0.8361, p?<?0.001) and log K_LDPE?=?0.458?×?log K_OW?+?3.092 for SPAHs (R²?=?0.5609, p?=?0.0077). The selected LDPE film was also proven to meet the condition of “zero sink” for the selected target compounds. These results could provide basic support for the configuration and in situ application of passive samplers.     

淀粉聚乙燃膜在受控条件下的好氧生物降物

采用土埋、真菌生长和ＣＯ２释放试验分别测定了几咱淀粉聚乙烯膜的生物降解性。试验结果表明，膜的生物降解性与膜中的淀粉含量正相关，并受膜比面积大小的影响。在受控条件下，含淀粉６％～３０％的经２８ｄ降解后，降解质量变化率在０．６％～１２．４％范围内，其ＣＯ２释放量为０．０２～０．１５ｍｇ／ｍｇ膜，中的聚乙烯组分不仅本身难被生物降解，而且还抑制微生物对其淀粉组分的降解。ＣＯ２是淀粉聚乙烯膜好氧生物降解的降