A System for Measuring Vertical Concentration Profiles of Gaseous Pollutants,Using Carbon Dioxide as a Case Study

An electronically-controlled sampling system, characterised by its organ pipe design, has been developed for sampling air sequentially, at different heights within the breathing zone. Data are automatically logged at the different receptor levels, for the determination of the average vertical concentration profile of gaseous pollutants. The system has been coupled to a carbon dioxide monitor and used in a brief study of the spatial and temporal variation of indoor carbon dioxide concentration. The system can easily be extended for different heights or modified for use with other types of gas monitor. The results of a trial run, which was carried out in a coffee room, are presented and applications of the Organ Pipe Sequential Sampling (OPSS) system are discussed.     

Escherichia coli Concentrations in Urban Watersheds Exhibit Diurnal Sag: Implications for Water‐Quality Monitoring and Assessment

The variability of indicator bacteria over a fine resolution time scale on the order of minutes has yet to be fully understood. In this study, we collected more than 700 Escherichia coli samples at a 10‐ and 30‐min resolution in an urban watershed in Houston. A Bacteria Diurnal Sag (BDS) marked with daytime exponential decay followed by an exponential nighttime regeneration was observed. This pattern was observed during all sampled events but varied depending on other variables. The concentrations during a 24‐h period varied 1 to 5 orders of magnitude and the fecal load was at least 10 times lower than what would be obtained using a single morning E. coli measurement, the typical sampling scheme in most monitoring programs. Decay rates, ranging from 3.67 to 24.7/day, decreased E. coli concentrations to below the water‐quality standards from 14:00 to 18:00 h and were strongly influenced by water temperatures and solar radiation intensities. Rapid regeneration occurred on the order of 9.41 to 64.1/day allowing E. coli concentrations to return to their pre‐decay levels. The data indicated that four to six samples taken between 06:00 and 18:00 h may be sufficient to define the BDS depending on stream conditions, and that a threshold concentration of approximately 100 MPN/dl (most probable number in a deciliter) existed for the studied urban watershed. These findings have significant implications for water‐quality monitoring, regulation, and compliance.     

固定燃烧源颗粒物稀释采样系统的研制与应用

为研究固定燃烧源颗粒物排放特征,研制开发了稀释烟道采样系统.该系统能模拟高温烟气排放到大气中的冷却、稀释、凝结等物理化学过程,捕集燃烧源排放的一次颗粒物.详细阐述了采样系统的结构并对系统进行了检验.整个采样系统稳定度高,测量结果可靠,操作简便.采样系统小型化设计,适合于现场应用.该系统已成功应用于我国典型燃烧源颗粒物排放特征研究.     

基于重要抽样法的耐压球壳可靠性计算方法研究

目的 解决耐压球壳极小失效概率的可靠性计算问题。方法 在自适应Kriging的基础上,结合重要抽样法提出耐压球壳可靠性计算方法。该方法在较大失效概率下构建的Kriging模型基础上获得重要方向,在重要方向上计算得到较低失效概率下的设计点,以设计点为中心,构建小失效概率的Kriging模型,并通过此模型采用重要抽样法开展可靠性计算。结果 分别使用提出的重要抽样法和蒙特卡洛法计算了2个算例的失效概率,计算结果表明,该方法具有较高的精度和效率。使用该方法对某耐压球壳工作载荷下的失效概率进行了计算,计算得到该球壳失效概率为4.094×10^–96。结论 研究结果可为无失效方程下极低失效概率的可靠性计算问题提供参考。     

Proposing an information criterion for individual-based models developed in a pattern-oriented modelling framework

Individual-based models (IBMs) have been improved in quality and reliability in recent years with an approach called pattern-oriented modelling (POM). POM proposes guidelines to develop models reproducing multiple patterns observed on the field and to test systematically how well the IBMs reproduce them. POM studies used generally traditional methods of goodness of fit such as the sum of squares evaluation or ad hoc comparisons of fitting errors and variations. Model selection, however, can be a rigorous statistical approach based on information theory and information criteria such as the Akaike's information criterion (AIC) or the deviance information criterion (DIC). So far, it has not been tried to link POM to these rigorous techniques. The main problems to achieve that are: (a) the difficulty to have likelihood functions for IBMs’ parameters and (b) the possibility to obtain posterior distributions of IBMs’ parameters given the patterns to reproduce. In a first part, this paper answers problem (a) by proposing and explaining how to calculate a deviance measure (POMDEV) for models developed in a context of POM. And while answering the second problem, a second part of the paper proposes an information criterion for model selection in a POM context (the pattern-oriented modelling information criterion: POMIC). This criterion does not yet have the same theoretical foundation as, e.g., AIC, but uses formal analogies to the DIC. In a third part POMIC is tested with a modelling exercise. This exercise shows the potential of POMIC to use multiple patterns for selecting among multiple potential submodels and eventually select the most parsimonious and well fitting model version. We conclude that POMIC, although being a heuristically derived approach, can greatly improve the POM framework.     

SAMPLING FRAME FOR IMPROVING PEBBLE COUNT ACCURACY IN COARSE GRAVEL‐BED STREAMS1

ABSTRACT: Improved sampling techniques are needed to increase the accuracy of pebble‐count particle‐size distributions used for stream studies in gravel‐bed streams. However, pebble counts are prone to operator errors introduced through subjective particle selection, serial correlation, and inaccurate particle‐size measurements. Errors in particle‐size measurements can be minimized by using a gravel template. Operator influence on particle selection can be minimized by using a sampling frame, 60 by 60 cm, in which sampling points are identified by the cross points of thin elastic bands. Serial correlation can be minimized by adjusting the spacing between the cross points and setting it equal to the dominant large particle size (=D₉₅). In a field test in a cobble‐bed stream, the sampling frame developed in this study produced slightly coarser size distributions, particularly in the cobble range, than the traditional heel‐to‐toe walk that selects particles with a blind touch at the tip of the boot. The sampling frame produced more similar sampling results between two operators than heel‐to‐toe walks. The difference between the two sampling methods is attributed to an unbiased selection of fine and coarse particles when using the sampling frame.     

AN EMPIRICALLY‐BASED SEQUENTIAL GROUND WATER MONITORING NETWORK DESIGN PROCEDURE1

ABSTRACT: A procedure using a simple, empirically‐based model that makes efficient use of available information has been developed for designing a ground water monitoring well network. A moving plume is described by siting wells in a sequential manner, relying upon two‐dimensional concentration data obtained from previously installed wells to determine the locations of future wells. Data sets from two well known, densely monitored natural gradient tracer studies were used to test the procedure. Plumes defined by all information in the original networks were compared to those defined by reduced networks designed by the new procedure. The new procedure tracked the plumes using only a portion of that information. The new procedure could have reduced the number of wells in the original tests by about 50 percent without appreciable loss of plume information as measured by plume location and extent and by tracer mass.     

低空分层降水和云水同步釆集系统的开发和应用

笔者自行开发并研制了低空(＜1 km)分层降水和云水采集系统,该系统成功地应用于福建省厦门市和贵州省贵阳市酸性降水来源和成因的研究中,取得了显著的成果,为探讨酸性降水来源和成因提供了有效的技术手段和支持。该系统可以在一定程度上代替航空测量,目前国内外的类似研究中没有使用该系统进行样品采集的先例,因此该系统的开发填补了国内外相关研究领域的空白。      

大气气溶胶中有机成分研究进展

有机物是大气气溶胶的重要组成部分,尤其是在细颗粒中,可占其干重的10%～70%。由于有机气溶胶的健康及气候效应,有机物的组成、源分布、颗粒行为等的研究越来越受到人们的重视。其中,有机物成分的鉴别和定量已成为近年来的研究热点。在分析中,就目前有机气溶胶的采样、有机成分提取、分离及定性、定量分析方法进行了综述,并比较了各种方法的优缺点。     

有机硫恶臭物质采样和分析检测技术研究

本研究以二甲二硫醚和甲硫醇为代表对有机硫恶臭物质的采样浓缩,热解析和ＧＣ,ＧＣ／ＭＳ的色谱分离,定性鉴定和定量检测方法进行了实验技术研究。与此同时研制开发了恶臭污染监测的系列配套装置－采样管,微型采样泵,热解析色谱进行装置和标准气体物质发生装置。经筛选确认,国产ＧＤＸＥ１０５采样管可对ＤＭＤＳ和ＣＨ３ＳＨ实现直接常温采样浓缩,样品回收率分别为１００％和６０％。ＧＣ／ＦＰＤ对二种硫化物的检出下限分别