碗窑碾压混凝土坝变形成因分析及监控指标的拟定

鉴于碗窑碾压混凝土重力坝个别变形测点测值异常现象,依据大坝变形观测资料,通过变形规律时空分析和统计模型的建立,以及影响因子的分解,合理地解释了其变形成因,从而得出碗窑水库大坝变形性态总体正常的结论。为确保大坝安全运行,通过建立有限元力学模型和混合模型,拟定了典型坝段坝顶水平位移的一级监控指标,进而更有效地监控大坝的安全性态。另外,就个别测点坝段时效有呈逐年缓慢上升的趋势,建议管理单位加强观测,并及时分析,确保工程安全运行。     

钠盐量影响下DD6单晶高温合金的高温热腐蚀规律研究

目的 开展镍基单晶高温合金DD6在950 ℃下的热盐腐蚀试验(95%Na2SO4+5%NaCl)，探明涂盐量和涂盐方式(周期涂盐和单次涂盐)对DD6高温热腐蚀的影响规律和机理。方法 结合扫描电子显微镜、X射线能量色散谱、X射线衍射等设备，对不同涂盐量及涂盐方式下DD6的表面及横截面形貌进行观察分析，分析不同涂盐量和涂盐方式下DD6的高温热腐蚀机理。结果 DD6在950 ℃下主要发生碱性熔融热腐蚀，同时伴随氧化、硫化和氯化等过程。高温热腐蚀使得DD6合金表面生成的保护性氧化膜被熔融态的腐蚀介质破坏，导致O、S、Cl等外部元素通过氧化膜的缺陷进入DD6基体中，在合金的亚表面发生内氧化、内硫化以及内氯化反应，横截面上出现明显的腐蚀层，其主要由氧化物以及硫化物组成。随着热腐蚀的进行，DD6表面物质发生了剥蚀，沉积盐量的增加导致剥蚀现象越加严重，合金内部致密的组织结构也被破坏，横截面上出现了大量孔洞、裂纹等缺陷。在相同涂盐量下，周期涂盐法使得DD6的腐蚀程度高于单次涂盐法。结论 DD6高温热腐蚀行为与涂盐量及涂盐方式密切相关，相同涂盐方式下，涂盐量越大，DD6热腐蚀更加严重。涂盐量一定时，周期涂盐法使得DD6的热腐蚀剧烈程度大于单次涂盐法，且DD6在上述热腐蚀条件下均发生剥蚀破坏。     

云南昌宁玉地里温泉水文地球化学特征及形成模式

以水化学及同位素技术为基础,对昌宁县玉地里温泉的地质及地热特征进行了研究,并取得了一些重要的认识.通过对比研究该温泉地下热水1980年和2012年的水文地球化学数据,发现经过30多年的循环演化,其水化学类型仍为HCO3-Na型.δD和δ18O同位素为该温泉首次获得,数据显示地下热水具有现代大气降水的氢氧同位素组成特征,属断裂带对流型深循环低温地下热水系统,其补给源区位于东部和南部山区,热储层和盖层的构造及岩性特征与地下热水的深循环和化学组成有着密切联系.     

武汉市耕地非农化的空间自相关分析

经济发展和城市扩张使包括耕地在内的大量开放空间被不断侵蚀,随着人们对耕地非市场价值和生态功能认识的不断加深,如何合理高效可持续地利用耕地被广泛关注。采用空间自相关分析方法从乡镇尺度定量研究了武汉市耕地非农化的空间关系,以探讨快速发展时期平原城市耕地非农化空间关系的变化及其原因。研究表明:(1)全局Morans I显示武汉市耕地非农化在1990~2011年的4个时期均呈现出显著的全局空间自相关,其聚集强度以2005年为分界点,前3个时期不断加强后有所下降;(2)通过EB修正的武汉市耕地非农化的LISA图显示武汉市耕地非农化的聚集区域由开始处于区域外围的LL型聚集为主导逐步转变为处于城乡交错区域的LH+HH型聚集为主导;(3)通过绘制不同时期不同聚集类型的重心移动路径可以发现LH+HH型聚集均出现先向东南再向东北移动的趋势,这种耕地非农化趋势与区域的产业布局有密切关系。通过空间自相关分析掌握武汉市耕地非农化的空间特征是开展耕地保护和实现耕地合理利用的基石,根据研究结果可以确定重点和优先管制区域以提升土地利用管制效果,协调好城市建设和耕地资源保护间的关系。     

如何保证热水锅炉的安全运行

针对热水锅炉的特点,阐述了如何保证热水锅炉的安全运行.     

Ecological Survey of Coastal I Water Adjacent to Nuclear Power I Plants in Taiwan

A total of six nuclear reactors installed in three power plants, two along the northern and one along the southern coasts of Taiwan, started their operations one after another since October 1977. Owing to the large quantities of cooling water intake into and discharge from the plants, some environmental factors such as water temperature, chlorine, environmental radioactivity and nearshore currents may be significantly changed. Variations of these abiotic environmental factors may influence the biological activities in the ecosystem, particularly doing some kinds of damage to marine biological resources. Therefore, the possible environmental impact upon the biological systems including the fishery resources along the northern and southern coasts of Taiwan should be studied before and during the plant operation.

We have started the long-term programmes of biological, chemical and hydro-graphical surveys of the nuclear power plant sites on both northern (since July 1974) and southern (since July 1979) coasts of Taiwan. the survey items include ocean currents, physical and chemical properties of sea water, primary productivity, specific compositions and interspecific relationships among phyto- and zooplankton, algae, invertebrates, corals, and fishes; and radionuclides in water and biological specimens, and fishery statistics. in general, except for a few events, the operations of the six units of nuclear power plants have not produced detectable effects on the marine ecosystem. Radio activity levels and radionuclides in water and the biological specimens remained the same as background levels throughout the survey period. However, the events of coral bleaching and fish body anomalies caused by thermal discharges were observed respectively along the outlets of third and second Nuclear Power Plants. the purposes of this paper are to report and evaluate these two events during the operations of nuclear power plants in Taiwan.     

Environmental assessment of dehydrated alfalfa production in Spain

Alfalfa is the major forage crop produced in temperate regions worlwide. Although this crop is currently used mainly for producing high-value livestock feed, its application for bioenergy production is a recent focus of interest. Even though it is not mandatory, alfalfa is normally dried in order to improve the quality of the final product. In this study, Life Cycle Assessment (LCA) was used to quantify the environmental impacts linked to alfalfa production in the major cultivation zone in Spain (Ebro Valley), including field activities, dehydration and transport to farms for livestock feeding. In addition, the identification of the most relevant processes contributing to the environmental impact and the potential improvements actions were also defined as objectives. Inventory data were obtained mainly from interviews with farmers complemented with published literature and comments from experts.LCA results were obtained for global warming, acidification, eutrophication, photochemical oxidant formation, land use, non-renewable cumulative energy demand and human, terrestrial and aquatic ecotoxicities. Within the life cycle of alfalfa, the dehydration process, production of phosphate fertilizer, application of nitrogen fertilizers and pesticides, water consumption and final transport to the consumer (by road and ship) were identified as hot spots. Based on these, some improvement measures were proposed and evaluated: (i) reduction of the moisture content of alfalfa and the use of a higher percentage of biomass for combustion in the dehydration process, (ii) no application of nitrogen fertilizer in maintenance years and (iii) use of more efficient trucks for transport. Their implementation would produce significant reduction of eutrophication, global warming, acidification, non-renewable cumulative energy demand and, to a lesser extent, photochemical oxidation formation and human toxicity impacts.     

关于综合成形指标F值的评价

简要介绍了 F_(81)、F_(835)、F_(838)、F_(881)和F_(882)的定义及测试方法,并用具体数据加以说明。F 值是薄钢板的成形性优劣性指标,具有方向性。其中,F_(81)在评定不同板厚、不同冲压级别的薄钢板成形性能时,显得更为敏感;而F_(83)系列(包括 F_(881)、F_(882)),由于采用同一结构形式的公式,只是因 A 的测试方法不同,对 F 值有微小的影响。F_(88)测试方法简便、准确并易于实现自动化,具有在大生产中应用的前景。     

Heterogeneity in fetal akinesia deformation sequence (FADS): autopsy confirmation in three 20–21-week fetuses

Fetal akinesia deformation sequence (FADS) is a rare condition characterized by intrauterine growth retardation (IUGR), congenital limb contractures, pulmonary hypoplasia, hydramnios and craniofacial abnormalities. The present report comprises an autopsy study of three fetuses to illustrate the variable clinical manifestations and neuropathological findings. Fetus 1 had arthrogryposis and no movement on fetal ultrasound examination. Aborted at 21 weeks, the fetus showed micrognathia, bilateral joint contracture with pterygia at the elbow and axilla. Growth retardation and pulmonary hypoplasia were not major features. Neuropathologic examination revealed anterior horn cell loss and lateral corticospinal tract degeneration in spinal cord, with marked muscular atrophy. Fetus 2, 20 weeks' gestation, had fetal akinesia, nuchal thickening, left pleural effusion, and Dandy-Walker malformation on ultrasound examination. Autopsy showed low-set ears, ocular hypertelorism, cleft palate, flexion contractures with pterygia over axilla, elbow and groin, pulmonary hypoplasia, Dandy-Walker malformation, unremarkable spinal cord and skeletal muscle. Fetus 3, 21 weeks' gestation, was aborted for fetal akinesia, neck and limb webbing and severe arthrogryposis. At autopsy, similar facial abnormalities, contracture and pterygia in neck and multiple major joints were found. Borderline pulmonary hypoplasia and severe lumbar scoliosis were also present. The brain, spinal cord and muscle were unremarkable. In these three fetuses, the prenatal ultrasound and autopsy findings were characteristic of FADS. Neurogenic spinal muscular atrophy was the basis of fetal akinesia in Case 1. Dandy-Walker malformation was present in Case 2, but the pathogenetic mechanism of fetal akinesia was not clear as spinal cord and muscle histology appeared normal. The etiology of akinesia was undetermined in Case 3; no extrinsic or intrinsic cause was identified. Copyright © 2002 John Wiley & Sons, Ltd.     

先进冷喷涂技术的应用及展望

首先介绍了冷喷涂技术的原理及特点,在此基础上,重点讨论了冷喷涂技术在不同领域的应用。最后,结合我国冷喷涂技术的发展现状,提出了冷喷涂技术的发展方向,并指出发展先进冷喷涂技术符合我国先进技术的发展需求,有助于提高我国制造业的综合水平。