The accounting method and application of CO2 emissions responsibility by the electricity sector at the provincial level in China

When accounting the CO₂ emissions responsibility of the electricity sector at the provincial level in China,it is of great significance to consider the scope of both producers’ and the consumers’ responsibility,since this will promote fairness in defining emission responsibility and enhance cooperation in emission reduction among provinces.This paper proposes a new method for calculating carbon emissions from the power sector at the provincial level based on the shared responsibility principle and taking into account interregional power exchange.This method can not only be used to account the emission responsibility shared by both the electricity production side and the consumption side,but it is also applicable for calculating the corresponding emission responsibility undertaken by those provinces with net electricity outflow and inflow.This method has been used to account for the carbon emissions responsibilities of the power sector at the provincial level in China since 2011.The empirical results indicate that compared with the production-based accounting method,the carbon emissions of major power-generation provinces in China calculated by the shared responsibility accounting method are reduced by at least 10%,but those of other power-consumption provinces are increased by 20% or more.Secondly,based on the principle of shared responsibility accounting,Inner Mongolia has the highest carbon emissions from the power sector while Hainan has the lowest.Thirdly,four provinces,including Inner Mongolia,Shanxi,Hubei and Anhui,have the highest carbon emissions from net electricity outflow- 14 million t in 2011,accounting for 74.42% of total carbon emissions from net electricity outflow in China.Six provinces,including Hebei,Beijing,Guangdong,Liaoning,Shandong,and Jiangsu,have the highest carbon emissions from net electricity inflow- 11 million t in 2011,accounting for 71.44% of total carbon emissions from net electricity inflow in China.Lastly,this paper has estimated the emission factors of electricity consumption at the provincial level,which can avoid repeated calculations when accounting the emission responsibility of power consumption terminals（e.g.construction,automobile manufacturing and other industries）.In addition,these emission factors can also be used to account the emission responsibilities of provincial power grids.     

Microbial fuel cells: Advances in electrode modifications for improvement of system performance

There is an increasing trend to conduct the researches related to Microbial Fuel Cells (MFCs) in the recent years. Limited power output has been the major obstacle for the practical application and upscaling of MFCs. Attempts have been made on electrode modifications such as anode treatments, cathode modifications with catalysts and bio cathodes developments to produce varying degrees of improved output current depending upon the types of modifications. Power density and Coulombic efficiency have been considered as the important parameters to analyze the system performances. This paper overviews on the advances made in MFCs’ researches focusing on different types of electrodes modifications along with the involved methodology. Furthermore, the system performances of different modified MFCs are compared in terms of the power density and the Coulombic efficiency.     

不同填料载体生物膜对微囊藻毒素的去除效果

利用自行设计的生物膜培养装置,通过对4种不同填料载体进行连续曝气循环培养生物膜,对湖水中的溶解态微囊藻毒素(MCs)的去除作用进行了研究。结果表明,填料载体上生物膜从形成到稳定大约需要3周;生物膜形成后对MCs的去除效率由高到低的顺序是:颗粒活性炭柱>多密孔球型滤料柱>塑料悬浮填料柱>陶瓷滤球柱。在实验水质条件下,当水力停留时间(HRT)=5 h,进水MCs浓度为21.5～47.25μg/L时,颗粒活性炭、多密孔球型滤料柱对MCs的去除率最高可达100%,塑料悬浮填料柱对MC-LR和MC-RR的去除率分别为70%和88%。当HRT=2.5 h时,塑料悬浮填料柱对MC-RR的去除率为MC-LR的2倍。生物膜对MCs的降解效果随温度(5～20℃)和溶解氧的升高而增加。塑料悬浮填料作为合适的生物膜挂膜填料载体对水源水的生物预处理具有良好的应用前景。     

厌氧折流板式微生物燃料电池堆影响因素研究

微生物燃料电池(MFC)中输出电压/电流的提升,以及反应器体积的扩展放大是其工程化应用的关键。本文构建了一个总体积为6.4 L的新型厌氧折流板式微生物燃料电池堆(ABSMFC)。以葡萄糖作为底物,探讨了阳极材料、液面高程差和水力停留时间(HRT)等因素对ABSMFC性能的影响。结果表明,碳纤维毡作为阳极时,电池单体外电路平均分压(R_(ex)=1 000Ω)为210 mV,填充石墨颗粒后增加到319.8 mV。格室间存在液面高程差时,电池单体、串联和并联的功率密度分别为207.1、181.1和215.7 mW/m~2,当无液面高程差(即水力相连)时为205.8、69.5和151.5 mW/m~2。4个电池单体串联和并联连接时,HRT对ABSMFC的产电稳定性无影响,溶解性COD的去除率和库仑效率均随HRT的增加而升高,且并联效果优于串联。     

中国环境效率评价及其影响因素实证研究

环境效率是实际污染排放和潜在污染排放的一种度量。本文运用包含污染排放的环境DEA模型,测算了1998-2007年中国省际环境效率,检验了其收敛情况。结果显示,全国环境效率总体水平较低,省际、区域间差距较大,表明现阶段实行地区间减排合作、推动环保技术在区域间扩散的现实必要性;分别从20032、005年开始,省际、区域环境效率差距逐渐缩小,存在一定的收敛趋势;同时,本文采用Tobit模型分析了影响环境效率因素,研究发现人均GDP对提高环境效率具有积极影响,而工业比重上升、财政分权度的提高以及贸易自由化对环境效率具有显著的负面影响。最后,基于实证研究的结果,就减少地区污染排放、提高我国环境效率给出了相关政策建议。     

Photo-dissociation of dimethylamine by KrBr excilamp

A study of dimethylamine photo-dissociation in the gas phase has been conducted using UV radiation delivered from a KrBr^* excilamp, driven by a sinusoidal electronic control gear with maximum emission at wavelength of 207 nm. The electrical input power and radiant power of the lamp were measured to determine their effects on the degradation. The influence of flow velocity and initial concentration of dimethylamine were also examined. In order to evaluate the photo-dissociation process comprehensively, several parameters were investigated, including removal efficiency, energy yield, carbon balance and CO₂ selectivity. It is shown that the removal efficiency increases with enhanced input power and decreased gas flow rate. A high removal efficiency of 68% is achieved for lamp power 102 W and flow velocity 15 m³ h⁻¹. The optimum dimethylamine initial concentration is around 3520 mg m⁻³, for which the energy yield reaches up to 442 g kW h⁻¹ when the input power is 65 W. In addition, two chain compounds (1,3-bis-dimethylamino-2-propanol; 3-penten-2-one, 4-amino) and three ring organic matters (1-azetidinecarboxaldehyde, 2,2,4,4-tetramethyl; N-m-tolyl-succinamic acid; p-acetoacetanisidide), were identified by GC–MS as secondary products, in order to demonstrate the pathways of the dimethylamine degradation.     

水力条件对复合人工湿地处理城市受污染河水效果的影响

通过对水力负荷、水力停留时间等水力条件的控制,观察其对复合垂直上行流人工湿地处理城市受污染河水效果的影响.一年多来的运行结果表明:水力条件对复合垂直上行流人工湿地去除其他污染物的影响显著,但对总氮去除的影响不大.水力停留时间的延长可提高总磷、氨氮、COD的去除效果;随着水力负荷的增加,总磷、氨氮、COD去除率都有所增加...     

某电厂600MW火电机组脱硫增容改造方案探讨

按照国家环保部文件要求,大唐集团河北某电厂600 MW机组湿法脱硫系统需进行增容改造。该电厂根据实际情况,归纳了3种可行的脱硫增容改造方案,即原吸收塔增加喷淋层和高度、双吸收塔串联、双吸收塔双循环,阐述了各自的技术特点,结合性能保证、工程投资、施工周期等影响因素,比较了各方案的优缺点。经过对比和论证,双吸收塔方案比单吸收塔方案更适合于本次工程改造。     

生产部门提高能源效率的宏观能耗回弹分析

提高能源效率已成为我国节能减排政策的重点,但是由于经济系统内在的调整机制作用,在宏观层面所能实现的节能效果可能不及微观技术层面能源效率提高的程度,甚至还会诱发更多的能源消耗,该现象被称为“宏观能耗回弹”效应.本文通过构建一个中国环境资源CGE模型,测算生产部门提高能源效率的宏观能耗回弹效应.结果显示,能源效率提高5％后,短期回弹效应为52.38％,节能效果仅达到技术层面预期的一半左右;长期回弹效应达178.61％,在高耗能部门竞争力提高、耗能产品出口扩张和经济增长的推动下,节能效果不但被完全抵消,总能耗还进一步增加.因此,生产部门提高能源效率在短期内确实能够降低我国能源消耗,但是由于回弹效应的存在,长期来看,在技术层面“产量相同投入更少”的努力反映到宏观经济层面则转变成“生产更多投入更多”,并且加剧了我国经济高耗能的偏好,提高能源效率所引发的产出增长和结构调整对能耗增加的刺激作用可能最终会抵消或者超过提高能源效率的节能效果.