Local and regional variability in snow conditions in northern Finland: A reindeer herding perspective

Weather station measurements were used to force the SNOWPACK snow model and combined with reindeer herders’ experiences to study the local and regional variations in snow conditions in a Finnish reindeer herding area for the 1981–2010 period. Winter conditions varied significantly between the four selected herding districts and between open and forest environments within the districts. The highest snow depths and densities, the thicknesses of ground ice, and the lengths of snow cover period were generally found in the northernmost districts. The snow depths showed the strongest regional coherence, whereas the thicknesses of ground ice were weakly correlated among the districts. The local variation in snow depths was higher than the regional variation and limits for rare or exceptional events varied notably between different districts and environments. The results highlight that forests diversify snow and foraging conditions, e.g., ground ice rarely forms simultaneously in different environments. Sufficient and diverse forest pastures are important during the critical winter season if reindeer herding is pursued on natural grazing grounds also in the future.     

浙江省工业烟粉尘总量控制研究

通过对浙江省工业烟粉尘排放总量和排放源现状进行分析,提出工业烟粉尘减排治理对策,对工业烟粉尘4个重点行业(水泥制造行业、火力发电行业、钢铁行业(包括炼钢、钢压延加工和黑色金属铸造行业)、纺织染整行业(包括棉印染精加工、化纤织物染整精加工和棉织造加工行业)排放源的烟粉尘减排途径和潜力进行分析测算,研究提出工业烟粉尘总量控制措施和建议。     

不同培养条件下锰过氧化物酶(MnP)的合成及其对甲基橙的降解

高效、大规模、低成本合成木质素降解酶是直接采用其降解难降解有机污染物所必须解决的问题.对锰过氧化物酶(MnP)降解甲基橙和在非灭菌的反应器中连续合成MnP的可行性进行考察.结果表明,在采用2 mmol H2O2和1.5 mmol MnSO4的降解体系中,获最大脱色效果,且100、200和300 U/L的MnP可在8h内将甲基橙分别脱色18％、23％和35％;在非灭菌的反应器水平上实现了固定化培养的P.chrysosporium连续23 d合成MnP,但MnP酶活仅为2～ 23 U/L,难以酶解甲基橙;然而,在摇瓶培养条件下固定化的P.chrysosporium合成的MnP却能达1 152 U/L.因此,直接采用MnP对污染物进行降解以及在非灭菌的反应器中持续合成MnP是可行的,但就在非灭菌条件下如何提高MnP的合成量还有待开展深入的研究.     

反硝化条件下有机碳低丰度河床沉积层中的苯胺降解

采集渭河河床沉积物,研究了反硝化条件下有机碳低丰度的河床沉积层中苯胺降解.结果表明,反硝化条件下,苯胺在有机碳低丰度的河床沉积层中可生物降解.使该环境中苯胺(约50 mg/L)降解近95%,当硝酸盐为30.69、184.16、245.54 mg/L时,降解时间分别约为20、45、70 d.在上述环境中另加35.98 mg/L乙酸盐后,苯胺降解速度在硝酸盐为184.16 mg/L时最大,硝酸盐为30.69 mg/L时最小.当硝酸盐为30.69 mg/L,不加乙酸盐,27 d苯胺降解约95%;添加35.98 mg/L乙酸盐后,实验进行了47 d还仍有近13 mg/L苯胺残留,说明外加碳源(乙酸盐)对苯胺降解具有抑制作用.但当硝酸盐为184.16、245.54 mg/L时,外加碳源(乙酸盐)则强化苯胺降解.水合金属氧化物对苯胺降解具有促进作用.     

秦皇岛市天然矿泉水水质特征及开发利用前景研究

秦皇岛市天然矿泉水主要赋存在早太古代的花岗岩和变质岩的构造裂隙与风化裂隙之中,有锶、偏硅酸、锶及偏硅酸、锶溴及偏硅酸等4种类型。矿泉水水源地数量较多,水质优良,但开采程度较低,开发利用前景广阔。     

河流型硅藻水华研究进展

通过对硅藻水华发生机制相关文献的研究分析,对硅藻水华发生机制做了一般性探讨,并重点关注了河流型水华的发生机制的独特点。河流水华种类主要为中心硅藻纲,静水生态系统水华种类除中心硅藻纲还包括部分羽纹硅藻纲种类。河流水华硅藻种类对营养盐浓度、温度和光照等环境因子具有一定的适应范围。与静水生态系统相比,河流硅藻水华受气象和水文等物理指标的影响更为明显。河流硅藻水华中常具有时滞现象,其中由气象和水文因素引起的时滞现象最为明显。目前河流硅藻水华的防治仍然以上游水库下泄稀释为主,但是这种方法会造成一定的水资源浪费。河流水华硅藻的生理属性、硅藻水华对生态系统的影响、节水与抑制水华的统筹以及其他控制水华的方法都是未来河流硅藻水华研究的重点。     

基于底泥再悬浮试验的太湖水质模拟

为探索浅水湖泊水动力扰动作用对底泥再悬浮影响的规律,在室内矩形水槽内模拟了各种水动力条件下太湖底泥的起动规律,得到了太湖底泥在3种不同起动标准下的起动流速,通过考察上覆水中悬浮物浓度的变化,建立了底泥沉积物再悬浮通量与水体流速的定量化关系。结果表明:太湖底泥在个别动、少量动、普遍动3种标准下的起动流速分别为15、30和40 cm/s,且底泥沉积物再悬浮通量与流速呈现线性正相关关系,再悬浮通量随流速增大而增大,且相关性较好。将该试验结果应用于太湖的水量水质数学模型中,并和太湖实测资料进行了对比,取得了比较满意的效果。该模拟装置能够在室内可控条件下较好地反映太湖沉积物再悬浮特征,对太湖的富营养化治理具有重要意义。     

青藏工程走廊(昆仑山口-清水湖段)地质灾害隐患点成因调查

通过野外实地调查发现,青藏工程走廊昆仑山口-清水河段发育的主要地质灾害隐患点有活断层儒移引起路基位错;活断裂作为导水通道,使冰丘穿刺路基;河岸坍塌导致铁路桥墩外露;铁路工程排水沟渗漏,铁路路基两侧水动力条件发生变化,导致铁路路基发生管涌;冻土冬季冻胀,夏季融沉导致路基裂缝、道路翻浆、管道变形;风力堆积作用导致青藏铁路护坡局部沙淤;风力吹蚀导致格拉输油管线外露。综合分析认为,青藏工程走廊昆仑山口-清水河段环境地质问题的产生是自然和人为因素复合作用的结果,应点、线、面结合考虑,综合治理。     

新型结构ABR的设计与水力特性研究

针对ABR自身的缺点,设计出一种新型结构的ABR.该反应器为双层结构,共有5部分组成,各部分容积各不相同.该反应器的设计思想是将ABR与生物滤池以及活性炭吸附等工艺相联合.这种设计能够最大程度地发挥各工艺的优势,进而达到更好的处理效果.通过脉冲响应实验对该反应器的水力特性进行研究,得出不同水力停留时间(HRT)下的停留...     

Choice of parameters for passive shielding of power-frequency magnetic fields

Epidemiological studies suggesting the possibility of harmful effects on human (specifically children’s leukaemia) due to long-term exposure to magnetic fields of extremely low frequency (e.g. 50/60 Hz) and relatively low values (i.e. over the microtesla range) have stirred high activity in the topic of magnetic field mitigation. To reduce these fields, it is common to use passive metal screens (e.g. plates made of aluminium or steel). To design them, effective and fast numerical computations are highly desirable. In this article, a method is presented, which computes various parameters of screens in a given shielding problem and yields magnetic field distribution and shielding factors. The method takes into consideration the 3D field distribution and is able to solve systems with large aspect ratios (thin thickness in comparison with its other dimensions); this is a common problem where other methods such as finite elements often experience difficulties. The presented method computes separately the field inside and outside the screens. Afterwards, the solutions are “stitched” together along the border of the subregions. Two practical examples are given of the developed numerical method.