新型聚乙烯填料生物滴滤床净化硫化氢气体的启动研究

研究了新型高密度聚乙烯改良型拉西环填料生物滴滤床净化硫化氢气体的启动过程,重点比较了启动过程中不同的挂膜方式对启动时间及效能的影响.结果表明,采用液相连续流强化挂膜法成膜时间短,在环境温度20～28℃时7 d可以挂膜成功.在启动过程中,随着工艺参数的突然改变(GRT缩短)和入口浓度波动,液相连续流强化挂膜后反应器的硫化氢去除率更稳定.在进气浓度最高为343 mg/m³时硫化氢去除率稳定在95%以上.试验过程中还发现,将SO₄^2-浓度作为活性污泥驯化完成的监测指标、液相S^2-去除率作为挂膜完成的监测指标更合理.启动结束后,通过2种途径减去喷淋液中的碳源并未影响硫化氢的去除率,这进一步表明生物滴滤床中硫化氢的净化主要由自养菌完成.     

Combined application of conservative transport modelling and compound-specific carbon isotope analyses to assess in situ attenuation of benzene, toluene, and o-xylene

In recent years, compound specific isotope analyses (CSIA) have developed into one of the most powerful tools for the quantification of in situ biodegradation of organic contaminants. In this approach, the calculation of the extent of biodegradation of organic contaminants in aquifers is usually based on the Rayleigh equation, and thus neglects physical transport processes such as dispersion that contribute to contaminant dilution in aquifers. Here we combine compound specific isotope analyses with a conservative transport model to study the attenuation of aromatic hydrocarbons at a former gasworks site. The conservative transport model was first used to simulate concentration reductions caused by dilution at wells downgradient of a BTEX source. In a second step, the diluted concentrations, together with the available stable carbon isotope ratios and carbon fractionation factors for benzene, toluene and o-xylene were applied in the Rayleigh equation to quantify the degree of biodegradation at each of those wells. At the investigated site, where other attenuation processes such as sorption and volatilisation were proven to be negligible, the combined approach is recommended for benzene, which represents a compound for which the effect of biodegradation is comparable to or less than the effect of dilution. As demonstrated for toluene and o-xylene, the application of the Rayleigh equation alone is sufficient if dilution can be proved to be insignificant in comparison to biodegradation. The analysis also suggests that the source width and the position of the observation wells relative to the plume center line are significantly related to the degree of dilution.     

全新世青藏高原东部西南季风的演变

本研究报道一组新的西南季风代用指标,即泥炭中单一种属植物———木里苔草残体纤维素和泥炭混合植物残体纤维素的δ13C时间序列,所记录的青藏高原东部全新世气候变化。两记录表明,该区全新世的下限年龄约11200aBP(14C年龄约9900aBP);从约11200aBP起该区迅速进入湿暖的全新世阶段,季风活动迅速增强;在约10800～5500aBP期间,季风总体保持在强盛状态,但其间有4次突然减弱,气候变干冷;约从5500aBP起季风活动在波动中逐渐减弱,其中有4次减弱最明显。所有这8次气候的突然变化都与北大西洋浮冰事件一一对应。这种密切的相关关系表明,西南季风强度的波动可能是对全球变化,特别是对海洋热盐环流引起的地球南北方气候波动的所谓"跷跷板效应"的响应。     

Fe和Fe2+对混合细菌产氢发酵的影响

在研究Fe粉剂量和Fe²⁺浓度对混合细菌产氢发酵的影响基础上,确定Fe和Fe²⁺促进混合细菌产氢能力的最佳阈值,并对乙醇型发酵菌群在不同Fe粉和Fe²⁺浓度下的产氢量和最大比产氢速率进行考察和对比.结果表明,Fe粉和Fe²⁺对乙醇型发酵菌群的产氢能力均有明显的促进作用.以葡萄糖为底物,投加Fe²⁺试验中,Fe²⁺浓度200mg/L获得最大产氢量143.7mL/g,较对照组提高32%;Fe²⁺浓度50mg/L获得单位VSS最大比产氢速率21.2 mL/(h·g),较对照组提高33%.投加单质Fe试验中,Fe粉剂量1000mg/L获得最大产氢量156.1mL/g,较对照组提高44%;Fe粉剂量500mg/L获得单位VSS最大比产氢速率23.5mL/(h·g),较对照组分别提高47%.单质Fe浓度高于50mg/L时,对发酵菌群产氢的促进作用要优于同浓度下的Fe²⁺.同时对混合细菌中铁的全量和形态分布进行了考察.     

阻挡放电联合金属氧化物催化降解H2S的研究

采用介质阻挡放电联合金属氧化物催化降解气态H2S,考察了单组分及复合金属氧化物催化剂、催化剂与低温等离子体结合方式对H2S及副产物O3去除性能的影响,分析了等离子体联合Mn复合金属氧化物催化降解H2S机理。结果表明,金属负载量相同条件下,电压低于22kV时,Mn复合金属氧化物对H2S的催化活性高于单组分Mn金属氧化物,催化活性及对O3的分解能力从大到小依次为:Ag+Mn、Cu+Mn、Fe+Mn、Mn。当电压为18 kV时,Ag+Mn、Cu+Mn、Fe+Mn复合催化剂分别比单组分Mn催化剂对H2S的去除效率提高了近10%、6%、4%。等离子体后催化区域中Mn催化剂催化氧化H2S的效率明显低于等离子体催化区域。Mn催化剂在等离子体后催化区域中能有效催化分解O3。随着电压的升高,Mn金属氧化物在等离子体后催化区域对H2S催化作用逐渐增强。在电压22 kV时,等离子体联合后催化比单独等离子体作用时,H2S去除效率提高了近11%。     

含硫天然气净化厂硫化氢泄漏分析及对策

以川东北某含硫天然气净化厂为对象,通过分析该净化厂的处理工艺及可能造成泄漏的各种原因,确定了硫化氢泄漏危险较高的生产单元。通过工艺压力、流量、物料组分的比对,选取了脱硫单元原料气和硫磺回收单元酸性气作为模拟泄漏物料。对该厂所在地的气象条件和厂区的地形地貌进行了调查,净化厂当地近5年风速、云量统计表明低风速和多云为主导天气,将D1.5m/s作为模拟硫化氢泄漏扩散的典型气象条件。采用了美国石油学会(API)推荐地面粗糙度长度。运用PHAST软件计算了在典型气象条件下通过3种不同孔径泄漏1 min,5min和30min,形成的立即危及生命或健康(IDLH)范围。在典型气象条件下IDLH的下风向边界距离在41m至1190m范围内,以硫磺回收单元的大孔径泄漏为最远。以小孔泄漏为例模拟并讨论了风速、大气稳定度对硫化氢扩散的影响。为降低H2S泄漏风险提出了在线监测及联锁系统设置的要求,对避免和减少硫化氢中毒伤亡事故具有指导意义。     

钻屑法测定煤层H_2S含量

为了测定煤层硫化氢(H2S)含量,防治矿井H2S涌出,提出一种通过钻屑法测定煤层H2S含量的方法。在未受采动影响的新鲜煤壁,采用钻屑法取样,通过测定煤样H2S解吸量、取样过程损失量和H2S残存量确定煤层H2S含量。根据溶于水中H2S的p H值和色谱分析解吸气体中H2S体积分数,确定H2S解吸量;根据煤样解吸规律和气样H2S体积分数,确定H2S损失量;根据色谱分析残存气体中H2S体积分数,确定其残存量。用此方法,对山西某矿H2S涌出煤层进行现场和实验室测定。研究表明,该矿H2S含量为(4.465~6.701)×10-3m3/t。钻屑法测定煤层H2S含量是可行的,可以为矿井H2S治理提供基础数据。     

Hybrid H2/Al dust explosions in Siwek sphere

Explosion indices and explosion behaviour of Al dust/H₂/air mixtures were studied using standard 20 l sphere. The study was motivated by an explosion hazard occurring at some accidental scenarios considered now in ITER design (International Thermonuclear Experimental Reactor). During Loss-of-Vacuum or Loss-of-Coolant Accidents (LOCA/LOVA) it is possible to form inside the ITER vacuum vessel an explosible atmosphere containing fine Be or W dusts and hydrogen. To approach the Be/H₂ explosion problem, Be dust is substituted in this study by aluminium, because of high toxicity of Be dusts. The tested dust concentrations were 100, 200, 400, 800, and 1200 g/m3; hydrogen concentrations varied from 8 to 20 vol. % with 2% step. The mixtures were ignited by a weak electric spark. Pressure evolutions were recorded during the mixture explosions. In addition, the gaseous compositions of the combustion products were measured by a quadruple mass-spectrometer. The dust was involved in the explosion process at all hydrogen and dust concentrations even at the combination ‘8%/100 g/m3’. In all the other tests the explosion overpressures and the pressure rise rates were noticeably higher than those relevant to pure H₂/air mixtures and pure Al dust/air mixtures. At lower hybrid fuel concentrations the mixture exploded in two steps: first hydrogen explosion followed by a clearly separated Al dust explosion. With rising concentrations, the two-phase explosion regime transits to a single-phase regime where the two fuel components exploded together as a single fuel. In this regime both the hybrid explosion pressures and pressure rise rates are higher than either H₂ or Al ones. The two fuels compete for the oxygen; the higher the dust concentration, the more part of O2 it consumes (and the more H₂ remains in the combustion products). The test results are used to support DUST3D CFD code developed at KIT to model LOCA or LOVA scenarios in ITER.     

Na_2CO_3/H_2O_2“稳定”的CO_2的型体研究(Ⅱ)——“稳定性二氧化氯”溶液的UV吸收光谱、纸层析特性、微观结构和离子色谱分析

本文对以稳定剂H_2O_2和Na_2CO_3与ClO_2制备的所谓"稳定性二氧化氯"溶液的UV吸收光谱、纸层析特性、微观结构及离子色谱进行了分析,并与纯NaClO_2及ClO_2溶液做了对比.结果表明,“稳定性二氧化氯” 与NaClO_2在UV吸收光谱、层析比移值、微观结构、离子色谱这几方面都具有很好或极其相似的一致性 表明“稳定性二氧化氮’与NaClO_2溶液中氯氧化物存在型体的一致性.因此,认为“稳定性二氧化氯“溶液中ClO_2是以亚氯酸盐ClO_2~-的型体存在的.     

不同来源腐殖酸的光解及过氧化氢对其影响

为探讨腐殖酸在环境中的行为及光解除去腐殖酸的可能性，利用大于２９０ｎｍ的模拟日光辐照，探讨了大骨节病病区、非病区腐殖酸和泥炭腐殖酸的光解过程和光解机理及过氧化氢对其光解的影响，发现随着光照时间的延长，腐殖酸水体系的总有机碳（ＴＯＣ）含量降低，ｐＨ值下降，过氧化氢可以促进腐殖酸的光解，其光解过程遵循一级动力学规律。计算了不同来源腐殖酸光解的速率及光解半衰期，发现土壤和泥炭腐殖酸比大骨节病病区饮水中腐