Low‐concentration hydrogen peroxide decontamination for Bacillus spore contamination in buildings

Remediation and recovery efforts after a release of Bacillus anthracis (anthrax) spores may be difficult and costly. In addition, response and recovery technologies may be focused on critical resources, leaving the small business or homeowner without remediation options. This study evaluates the efficacy of relatively low levels of hydrogen peroxide vapor (HPV) delivered from off‐the‐shelf equipment for the inactivation of Bacillus spores within an indoor environment. Decontamination evaluations were conducted in a house using both Bacillus atrophaeus var. globigii (Bg; as surrogates for B. anthracis) inoculated on the carpet and galvanized metal as coupons and Geobacillus stearothermophilus (Gs) as biological indicators on steel. The total decontamination time ranged from 4 to 7 days. Using the longer exposure times, low concentrations of HPV (average levels below 20 parts per million) effectively inactivated Bg and Gs spores on the materials tested. The HPV was generated with commercial humidifiers and household‐strength hydrogen peroxide solutions. The presence of home furnishings did not have a significant impact on HPV efficacy. This simple, inexpensive, and effective decontamination method could have significant utility for remediation following a B. anthracis spore release, such as following a terrorist attack.     

用生物滴滤床处理H2S和挥发性有机物混合废气

用生物滴滤床（BTF）处理某化工厂污水站的H2S和挥发性有机物（VOCs）混合废气,当废气中H2S质量浓度为120～400mg／m^3、VOCs质量浓度为115～340mg／m^时,运行稳定后H2S和VOCs的去除率为95％和85％。考察了影响BTF运行的循环水水质情况,试验结果表明：加入Na2CO3可使循环水pH控制在3～6;循环水中含盐量、Cl^-质量浓度和SO4^2-质量浓度分别为2200～3300,600～800,1200～1400mg／L,均未达到抑制微生物的水平。     

不同小叶章湿地H2S和COS的排放通量研究

利用静态箱/气相色谱法,观测了小叶章沼泽化草甸和小叶章典型草甸两种湿地类型中H2S和COS在生长季(5-9月)的释放动态,结果表明:在两种小叶章湿地中,H2S和COS的排放通量均具有明显的季节和日变化规律.在小叶章沼泽化草甸中H2S和COS的平均释放通量分别为0.34μg·m-2·h-1和-0.29μg·m-2·h-1;小叶章典型草甸H2S和COS的平均释放通量分别为0.14μg·m-2·h-1和-0.20μg·m-2·h-1;小叶章沼泽化草甸H2S和COS的平均释放通量均高于小叶章典型草甸.在生长季两种小叶章湿地均能向大气释放H2S,对COS则表现为从大气中吸收.小叶章的生长过程对H2S和COS的排放影响显著,在小叶章生长旺盛期,H2S出现排放峰值,COS出现吸收高峰.     

铂载钴钼二元硫化物对H_2S电催化活性研究

为考察溶胶凝胶法制备的Co-Mo二元硫化物对H_2S气体的电催化活性,通过循环伏安法和Tafel曲线分析对铂载不同Co、Mo掺杂比的电催化剂进行表征.结果表明,不同阳极电催化剂交换电流密度J_0由大到小依次为,铂载n(Co):n(Mo)=2:3、铂载n(Co):n(Mo)=2:1、铂载n(Co):n(Mo)=1:1和铂,即铂载n(Co):n(Mo)=2:3阳极电催化剂具有较好的活性,这与循环伏安曲线测试结果一致.电解质溶液pH值为6～7时,随着温度的升高铂载n(co):n(Mo)=2:3阳极电催化剂活性呈现上升的趋势.优化后的Co、Mo掺杂原子比约为0.66,此类电催化剂在操作温度80℃下,交换电流密度为1.318mA/cm~2,表观活化焙值为616.6 kJ/mol .研究表明,铂载钴钼二元硫化物适合作为低温H_2S燃料电池阳极电催化剂,其中Co、Mo掺杂比对电催化活性影响较大.     

The impact of ISO 14001 on corporate environmental performance: a study of Swedish manufacturing firms

The debate concerning the environmental effectiveness of environmental management systems (EMS) based on ISO 14001 is still open and scholars have called for further studies that can explain the contrasting evidence in previous research. As a response, this study aims to contribute knowledge about the effects of ISO 14001-based EMS by presenting fact-based environmental data. The study focuses on changes in performance over a period of 12 years and includes both firms with an EMS (66 firms) and firms without one (50 firms). Consideration is given to the improvement efforts in the firms before EMS adoption making it possible to neutralize any selection effects where better environmental performance precedes ISO 14001 adoption. Analysis has been carried out using statistical methods for six different environmental areas. No statistically significant differences between certified and non-certified firms concerning the change in the rate of improvement could be found in any of the six areas. However, it can be suspected that EMS adoption has positive effects on energy use and waste production whereas the non-adopting firms seem to perform better concerning air emissions. These mixed results mirrors previous research, which is rather worrying considering the worldwide popularity of EMS based on ISO 14001 in industry.     

江苏省沿江开发区空间分工、制造业集聚与转移

基于新经济地理学相关理论,针对江苏省沿江开发战略实施以后,制造业空间可能存在的变动,在整理和分析调查问卷资料的基础上,选择专业化指数和基尼系数2种方法来定量分析江苏省21个沿江省级以上开发区空间分工、制造业集聚和转移态势。结果表明：（1）2002~2006年江南沿江开发区通过向江北沿江开发区转移部分传统产业,逐渐形成了江南沿江技术/资本密集型制造业“中心”和江北沿江劳动密集型制造业“外围”的空间分工格局;（2）江南沿江开发区内部、江北沿江开发区内部尚未形成良好的分工关系;（3）受开发区发展阶段、区域产业政策、本地化资源供给和市场需求等因素影响,并未发现理论预期的普遍存在的产业集聚现象,仅纺织服装、石化、电力、塑料橡胶等产业呈现集中趋势.     

XZKP型高效空塔喷淋烟气脱硫装置技术特点

介绍了XZKP型高效空塔喷淋烟气脱硫装置的技术原理、技术特点、中试及工业化试验的情况。该技术通过改进工艺和结构,在提高脱硫效率和脱硫剂循环利用率两项技术上成效显著,用户可在不增加装置投资的前提下,获得更高的效率和更低的运行成本。     

N掺杂TiO_2光催化剂的制备及其H_2O_2改性的研究

以钛酸四丁酯为前驱物,采用水解沉淀法制备了N掺杂TiO_2光催化剂和H_2O_2改性的N掺杂TiO_2光催化剂.实验表明,H_2O_2改性的N掺杂TiO_2光催化剂的最佳制备条件为:氨水(质量分数28%)加入量20 mL,焙烧温度500 ℃,H_2O_2(质量分数30%)加入量2.0 mL.日光下,N掺杂TiO_2光催化剂及H_2O_2改性的N掺杂TiO_2光催化剂在反应90 min时的活性红紫去除率达99%,它们对活性红紫的去除率远高于P_(25)TiO_2光催化剂.H_2O_2改性的N掺杂TiO_2光催化剂中N质量分数比改性前明显提高,制备的两种催化剂中不仅含有N元素,同时还含有C和H元素.     

Seasonal Differences in the Levels of Gaseous Air Pollutants in the Vicinity of a Waste Dump

Hydrogen sulphide, ammonia, nitrogen dioxide, mercaptans and sulphur dioxide (H₂S, NH₃, NO₂, R-SH, SO₂) concentrations were measured at the location in the vicinity of the waste dump to determine the air pollution level of these pollutants prior to the operation of the Mobile Thermal Treatment Plant. Samples were collected over one year period. Seasonal differences, and the influence of meteorological parameters (temperature, relative humidity, pressure and wind direction) on the air pollution levels were studied. Results show relatively low concentrations of H₂S, NO₂, R-SH and SO₂, while NH₃ levels were higher compared to the guideline values. Good weather conditions (high air pressure and low relative humidity) are connected to long range transport of NO₂, while higher temperatures result in elevated NH₃ and R-SH concentrations. Because of the predominant northeast wind direction (the same as the waste dump direction), the contribution of air pollution from the direction of the waste dump at the measuring site is significant, but that does not necessarily mean that the pollutants originated from that source.     

化学药品原料药制造业自行监测技术指南设计研究

通过分析化学药品原料药制造业的基本情况、产品种类和生产工艺,以及自行监测技术指南编制的目的和基本要求,梳理出确定监测点位和对应多项污染物排放标准为目前该行业自行监测技术指南编制工作的难点。根据以上分析,提出将指南按工艺类型拆分、监测点位和废气监测指标的确定、监测频次的优化、生产记录内容的设定列为指南编制工作的重点。