磷石膏水热法合成硫酸钙晶须

以磷石膏为原料,二水合硫酸钙、硫酸镁、甘油为添加剂,采用水热法合成硫酸钙晶须,考察了料浆含量、反应温度、反应时间、体系pH等因素对晶须的直径和长径比的影响;并采用SEM技术观察硫酸钙晶须的形貌。实验结果表明,当磷石膏含量2.5%（w）、反应温度130 ℃、反应时间4 h、体系pH 4时,制备得到的硫酸钙晶须长径比为56.24,平均直径为0.17 μm。SEM表征结果显示,硫酸钙晶须形貌规整、分散均匀、直径较小,达百纳米级。     

水热炭化餐厨垃圾制备纳米铁/炭复合材料

以餐厨垃圾中有机组分作为碳源,通过添加铁盐水热炭化制备铁/炭纳米复合材料。考察了不同铁盐(Fe-SO4,FeCl3,Fe(NO3)3)对餐厨垃圾水热炭化物的形貌,以及氮、磷元素的迁移转化的影响;并研究了负载铁的物理、化学性质。实验结果表明,铁盐在水热炭化过程中促进了餐厨垃圾转化生成多种纳米结构。铁的价态是影响复合物形貌的主要影响因素:三价铁离子对大分子有机物的水解和炭化过程有催化作用,从而促进壳核式结构的纳米线及微米球复合物的生成;而亚铁离子则导致可溶性有机物炭化形成空心纳米球结构。负载铁的化学形态主要受阴离子的影响:硝酸铁体系中铁主要以氢氧化物形式沉积、其他阴离子体系则以磷酸盐为主要形态负载。     

某高拱坝坝基辉绿岩脉改造特征及其工程影响

通过对我国西南某高拱坝坝基花岗岩体内穿插的辉绿岩脉的侵位和后期构造—热液作用以及浅表改造作用的研究,并对比各组不同走向辉绿岩脉的变形破坏特征,查明坝基辉绿岩脉在其活动后期热液蚀变的基础上,在同一构造应力作用下,各组辉绿岩脉具有不同的主要变形破坏方式,即脉壁张裂、剪切滑移和挤压破碎等,从而控制坝基岩体内与岩脉有关的各种软弱结构面、工程岩体结构及其力学性质,并简要讨论了各组岩脉对拱坝坝基抗滑稳定性和变形稳定性的影响。     

HF对Cu-SSZ-13/堇青石的原位合成及脱除NO_x的影响

以Cu-TEPA为模板剂原位水热合成一系列具有优良deNOx特性的Cu-SSZ-13/堇青石整体式催化剂.为进一步改善其氨的选择性催化还原氮氧化物的活性,在制备过程中添加HF对原位制备Cu-SSZ-13/堇青石整体式催化剂进行改性.利用XRD、SEM、XPS、BET、ICP-AES等对样品进行了表征.结果表明,当nHF/nAl在0.015—0.0375时,晶化72 h的Cu-SSZ-13/堇青石表现出了优异的脱硝性能和抗老化性能,其最大转化率为99.8%,NOx转化率保持在90%以上的最宽活性温度窗口为280—640℃,而无HF的新鲜样品的NOx转化率保持在90%以上的活性温度窗口为300—580℃;720℃老化50 h处理后,nHF/nAl=0.015—0.0375样品的NOx转化率保持在90%以上的最宽活性温度窗口为360—520℃,未添加HF的老化样品相应的活性温度窗口为400—500℃.无论新鲜还是老化,nHF/nAl=0.015—0.0375样品在低温段200—300℃和高温段500—700℃的NOx转化率基本都大于未添加HF的样品.结合表征结果,在催化剂原位水热合成过程中HF的加入既提高了样品的相对结晶度和负载量,又增大了样品的比表面积和比孔容,且提高了Cu-SSZ-13/堇青石骨架结构的稳定性,进而在一定程度上改善了Cu-SSZ-13/堇青石的高温脱硝活性和水热稳定性.     

Scientists as Stakeholders in Conservation of Hydrothermal Vents

Abstract: Hydrothermal vents are deep‐sea ecosystems that are almost exclusively known and explored by scientists rather than the general public. Continuing scientific discoveries arising from study of hydrothermal vents are concommitant with the increased number of scientific cruises visiting and sampling vent ecosystems. Through a bibliometric analysis, we assessed the scientific value of hydrothermal vents relative to two of the most well‐studied marine ecosystems, coral reefs and seagrass beds. Scientific literature on hydrothermal vents is abundant, of high impact, international, and interdisciplinary and is comparable in these regards with literature on coral reefs and seagrass beds. Scientists may affect hydrothermal vents because their activities are intense and spatially and temporally concentrated in these small systems. The potential for undesirable effects from scientific enterprise motivated the creation of a code of conduct for environmentally and scientifically benign use of hydrothermal vents for research. We surveyed scientists worldwide engaged in deep‐sea research and found that scientists were aware of the code of conduct and thought it was relevant to conservation, but they did not feel informed or confident about the respect other researchers have for the code. Although this code may serve as a reminder of scientists’ environmental responsibilities, conservation of particular vents (e.g., closures to human activity, specific human management) may effectively ensure sustainable use of vent ecosystems for all stakeholders.     

Glucose production from hydrolysis of cellulose over a novel silica catalyst under hydrothermal conditions

A novel silica catalyst was synthesized by evaporation-induced self-assembly (EISA) method and tested for the catalytic selective hydrolysis of cellulose to glucose. This silica catalyst exhibited a higher catalytic activity than other oxides prepared by the same method, such as ZrO₂, TiO₂, and Al₂O₃. Using silica as a catalyst, cellulose was selectively hydrolyzed into glucose with a glucose yield as high as 50% under hydrothermal conditions without hydrogen gas. The silica catalyst was characterized by Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results of temperature-programmed desorption of ammonia (NH₃-TPD) and textural properties indicated that the synergistic effect between strong acidity and a suitable pore diameter of the silica catalyst may be responsible for its high activity. In addition, the catalyst was recyclable and showed excellent stability during the recycle catalytic runs.     

CTAB与亚临界水联合预处理对污泥水热液化制备生物油的影响

以脱水污泥为原料针探究对其水热液化（HTL）制取生物油的影响.结果表明,胞外聚合物（EPS）的释放可以促进有机物在高温时断链成分子量较高的有机质,促进生物油的形成.与原污泥相比,亚临界水（SCW）预处理会促进脱氨基反应,生物油中的氮含量降低51.74%;十六烷基三甲基溴化铵（CTAB）预处理则促进了19.3wt%的有机物转移至油相中,同时生物油中的酸含量降低13.49%;CTAB-SCW联合预处理后,生物油收率提升了66.92%,醇含量提升28.32%.联合预处理中酯交换反应是主反应,同时亲核反应、氧化反应和消除反应也显著增强.     

深海热液喷口周围微氧耐压细菌的培养研究

研究采用析因实验设计,探讨了培养基的水源、培养温度和生长pH等因素对喷口细菌生长繁殖的影响,初步探索了常压下东太平洋某海底喷口周围微氧耐压细菌的生长条件。样品培养10d后,对培养液中细菌量进行显微计数,实验数据用SPSS11.0统计软件中的方差分析程序进行处理。统计结果显示:在标准大气压下,从研究样品中获得最多细菌数的较优培养条件为:培养基水源为单蒸水;生长pH为7.60;培养温度为50℃。在该条件的培养液中细菌平均浓度达2.596×10个/mL。研究结果为进一步认识、鉴定与开发利用深海喷口周围细菌资源打下了基础。     

深海热液喷口微生物对矿物元素行为的影响

介绍了生长在深海热液喷口周围的微生物的种类及其生长繁殖的能量来源;并就其参与的矿物沉积和浸出行为做了阐述;最后在目前国内外研究现状的基础上提出了今后应该研究的方向。     

新型球形介孔锰锌铁氧体的制备、表征及对亚甲基蓝的吸附特性

以废旧锌锰电池生物浸提液为前驱体、聚乙烯吡咯烷酮(PVP)为结构导向剂,采用水热法制备了一种新型球形介孔锰锌铁氧体(P-MZF).同时,利用扫描电镜(SEM)、比表面积(S_(BET))、X-射线衍射(XRD)、高分辨透射电镜(HRTEM)、选区电子衍射(SAED)、红外光谱分析(FT-IR)、X射线光电子能谱分析(XPS)和磁滞回线(VSM)等表征分析了制备的材料,并研究了其对亚甲基蓝(MB)的吸附特性.结果表明,相比于无PVP制备的样品,P-MZF的比表面积S_(BET)(126.7 m~2·g~(-1))、活性点位的增加大幅提升了对MB的化学吸附能力;吸附动力学和热力学分析表明,Pseudo second-order和Langmuir模型适合描述其对MB的吸附行为.此外,经过5次循环吸附-醇洗再生,P-MZF对MB的吸附效率仍可维持在93%以上.制备的P-MZF具有高吸附和磁回收简便的优点.