聚合硅酸铝铁的带电特征及X衍射分析

借助于微电泳技术研究了PSAF的带电特性，探讨了PSAF的絮凝机理，并与传统絮凝剂作了比较。结果表明：PSAF水解聚合形成物的电荷量随Al^3 ／Fe^3 摩尔比的减小以及SiO2浓度和碱化度B^ 的增大而逐渐降低，在酸性至中性范围内荷正电，在pH值大于7．5时荷负电。通过X射线衍射图谱的分析，证明在实验条件下，Al^3 、Fe^3 和SO4^2-均参与了反应，与聚硅酸形成了无定形高聚物。     

二硫代氨基甲酸盐絮凝处理模拟油田聚合物驱采油废水的效果研究

在碱性条件下,端氨基聚醚Jeffamine-T403与二硫化碳反应合成了二硫代氨基甲酸盐型絮凝剂DTC(T403).考察了DTC(T403)对模拟聚合物驱采油废水的絮凝除油性能,研究了DTC(T403)、水解聚丙烯酰胺(HPAM)、Fe2+和Fe3+的投加量以及pH值对除油效果的影响.结果发现,DTC(T403)与Fe2+络合形成的网状螯合物通过网捕作用取得良好的絮凝除油效果;HPAM的存在影响絮凝除油效果;在同时投加Fe2+和DTC(T403)且二者的投加量分别为10mg/L和25mg/L的条件下,HPAM含量在0～900mg/L范围和含油量约300mg/L的模拟水样经絮凝处理后其含油量均可降到10mg/L以下.DTC(T403)的絮凝除油效果受pH値的影响,在pH7.5条件下可取得良好的除油效果.DTC(T403)适用于含Fe2+的聚合物驱采油废水的处理.     

Adsorption of phenolic compounds from aqueous solutions by aminated hypercrosslinked polymers

Two novel polymers （NJ-1 and N J-2） were synthesized by chemically modified a hypercrosslinked polymer NJ-0 with dimethylamine and trimethylamine, respectively. The comparison of the adsorption properties of the three polymers toward phenol, resorcin and phloroglucin was made. The study focused on the static equilibrium adsorption behaviors and the adsorption thermodynamics. Freundlich equation was found to fit the adsorption results well. The effect of amino groups introduced onto the surface of the resin and the structure of phenolic compounds on the adsorption were also studied. The hydrogen-bonding interaction and electrostatic interaction could happen between the amino groups and the adsorbates. The adsorption impetus increased as quantity of hydroxyl groups increased, but the adsorption capacity decreased due to the drop of the matching degree of the aperture of resins and the diameter of adsorbate molecules.     

在线超声作用下流化床膜生物反应器的膜污染机制

在流化床膜生物反应器中引用在线超声技术来控制膜污染,考察了在线超声对污泥混合液特性的影响,探讨了在线超声作用下的膜污染机制。结果表明：在线超声流化床膜生物反应器的跨膜压差（TMP）增长速度明显慢于普通流化床膜生物反应器,可延长膜清洗周期约51％。在线超声作用下,污泥平均粒径降低约70μm,污泥胞外聚合物（EPS）含量增加（14±5）mg／g,混合液溶解性微生物产物（SMP）有所降低;同时,在线超声使得污泥浓度和混合液粘度降低,从而改善了混合液的过滤性,有助于膜污染的控制。分析表明,在线超声能够减少膜表面不可逆污染的发生,膜的主要污染机制为泥饼层污染。     

不同聚合铝对水中有机物的去除研究

强化混凝是去除水中消毒副产物的最佳方法之一。文章针对强化混凝技术,从去除水中有机物的角度出发,对不同聚合铝的处理效果进行了研究。结果表明,酸性条件、加大投药量有利于水中TOC及UV254的去除,且酸性条件更为有利。在pH=6.3,工业PAC投药量为1.5×10-4mo(l有效铝)时去除效果最佳,水中总有机碳(TOC)及紫外吸光度(UV25)4的去除率分别可达到46%及57%,实验室制备的聚合铝碱化度越高越有利于水中有机物的去除。     

投加阳离子聚合物加速UASB反应器中颗粒污泥形成

运行2个UASB反应器,研究常温低浓度进水条件下,投加阳离子季胺盐絮凝剂对厌氧颗粒污泥形成的影响。一个反应器中投加阳离子季胺盐絮凝剂（称A反应器）,另一个反应器作为对照不投加絮凝剂（称B反应器）。经过196 d的运行,2个反应器中均形成了活性较高、沉降性能良好的颗粒污泥。A反应器中的污泥颗粒更多、粒径更大,粒径＞0.5 mm的污泥颗粒的百分比比B反应器的多16%～19.3%。研究结果表明,投加阳离子聚合物加速了颗粒污泥的形成,提高了颗粒污泥的产甲烷活性和沉降性能。     

Selective removal of 2,4-dichlorophenol from contaminated water using non-covalent imprinted microspheres

A molecularly imprinted polymer (MIP) for selective removal of 2,4-dichlorophenol (2,4-DCP) in water was prepared as microspheres by the reverse microemulsion polymerization method based on the non-covalent interactions between 2,4-DCP, oleic acid, and divinylbenzene in acetonitrile. Microspheres have been characterized by Fourier transform infrared spectrometer (FTIR) and energy dispersive X-ray spectrometer (EDS) studies with evidence of 2,4-DCP linkage in polymer particles and scanning electron microscopy (SEM) to study their morphological properties. The proper adsorption and selective recognition ability of the MIP were studied by an equilibrium-adsorption method. The MIP showed outstanding affinity towards 2,4-DCP in aqueous solution and the optimum pH value for binding has been found around the neutral range. The molecular recognition of 2,4-DCP was analyzed in detail by using molecular modeling software. In addition, by investigating the variation in the adsorption ability of the MIP, it clearly showed excellent reproducibility.     

Characterization of an adsorbed humin-like substance on an allophanic soil formed via catalytic polycondensation between catechol and glycine, and its adsorption capability to pentachlorophenol

An allophanic soil (AS) catalyzed the formation of dark-colored polymers via polycondensation reactions between catechol and glycine. The organic carbon content of the AS was increased from 0.16% to 1.3%, indicating that some of the dark-colored polymers had been adsorbed to the AS. The characteristics of the dark-colored polymers adsorbed on the AS were similar to those of a humin that is not extractable with an aqueous alkaline solution. Such a humin-like substance (HuLS) was separated from the AS by treatment with a mixture of HF and HCl. The HuLS and humic acid-like substance (HaLS), comprising the acid-insoluble fraction in the reaction mixture, were characterized by elemental analysis, size exclusion chromatography, pyrolysis-GC/MS and ¹³C NMR. However, the structural features of HaLS and HuLS had many points in common. These results suggest that HuLS-AS can be regarded as an organo-clay complex formed by the strong adsorption of HaLS to the AS. The adsorption of pentachlorophenol (PCP) to AS and HuLS-AS was examined at pH 5.5. At this pH, the zeta potential of the HuLS-AS showed a negative value. It would, therefore, be expected that pentachlorophenolate anions would adsorb with difficulty to HuLS-AS because of electrostatic repulsion. Nevertheless, the adsorption coefficient for PCP to HuLS-AS, as estimated by the Freundlich isotherm, was seven times larger than that for AS. These results show that HuLS, when adsorbed on the AS surface, has the capability to enhance the adsorption of PCP.     

NDA-66树脂对邻苯二甲酸的吸附及脱附性能

研究了NDA-66新型超高交联树脂对邻苯二甲酸的吸附及脱附性能。实验结果表明：静态吸附过程中,在初始邻苯二甲酸质量浓度1 000 mg/L、溶液pH=2.0、吸附时间600 min的条件下,吸附量可达190 mg/g;动态吸附过程中,处理11吸附床层体积倍数（BV）的邻苯二甲酸溶液,当溶液流量为1.5 BV/h时,吸附率可达100%;动态脱附过程中,在w（NaOH）= 6%、脱附温度328 K的最佳脱附条件下,脱附率可达99%以上。     

Intra-particle migration of mercury in granular polysulfide-rubber-coated activated carbon (PSR-AC)

The depth profile of mercuric ion after the reaction with polysulfide-rubber-coated activated carbon (PSR-AC) was investigated using micro-X-ray fluorescence (μ-XRF) imaging techniques and mathematical modeling. The μ-XRF results revealed that mercury was concentrated at 0-100 μm from the exterior of the particle after 3 months of treatment with PSR-AC in 10 ppm HgCl₂ aqueous solution. The μ-X-ray absorption near edge spectroscopic (μ-XANES) analyses indicated HgS as a major mercury species, and suggested that the intra-particle mercury transport involved a chemical reaction with PSR polymer. An intra-particle mass transfer model was developed based on either a Langmuir sorption isotherm with liquid phase diffusion (Langmuir model) or a kinetic sorption with surface diffusion (kinetic sorption model). The Langmuir model predicted the general trend of mercury diffusion, although at a slower rate than observed from the μ-XRF map. A kinetic sorption model suggested faster mercury transport, which overestimated the movement of mercuric ions through an exchange reaction between the fast and slow reaction sites. Both μ-XRF and mathematical modeling results suggest mercury removal occurs not only at the outer surface of the PSR-AC particle but also at some interior regions due to a large PSR surface area within an AC particle.