Impact of atrazine and nitrogen fertilizers on the sorption of chlorotoluron in soil and model sorbents

Sorption of chlorotoluron in ammonium sulfate, urea and atrazine multi-solutes system was investigated by batch experiments. The results showed application of nitrogen fertilizers to the soil could affect the behavior of chlorotoluron. At the same concentration of N, sorption of chlorotoluron decreased as the concentration of atrazine increased on the day 0 and 6 in soil, respectively. The sorption of chlorotoluron increased from 0 to 6 d when soils were preincubated with deionized water, ammonium sulfate and urea solution for 6 d. That indicated incubation time was one of the most important factors for the sorption of chlorotoluron in nitrogen fertilizers treatments. The individual sorption isotherms of chlorotoluron in rubbery polymer and silica were strictly linear in single solute system, but there were competition sorption between pesticides or between pesticides and nitrogen fertilizers. That indicated the sorption taken place by concurrent solid-phase dissolution mechanism and sorption on the interface of water-organic matter or water-mineral matter.     

汽车零部件金属卤素灯阳光模拟试验与户外自然曝晒的相关性研究

目的 探究汽车零部件金属卤素灯阳光模拟加速试验与户外自然曝晒的关系。方法 使用3种典型高分子透明材料分别进行阳光模拟加速试验、AIMBOX/Arizona户外曝晒和Florida户外曝晒,基于试验后样品的黄变值,比较阳光模拟试验与户外曝晒的相关性,并对阳光模拟试验与户外曝晒的加速性进行探讨。结果 阳光模拟（IP/DP箱）加速试验与AIM BOX/Arizona户外曝晒高度相关,综合加速倍率约是AIM BOX/Arizona户外曝晒的3倍。阳光模拟（IP/DP箱外）加速试验与Florida户外曝晒高度相关,综合加速倍率是Florida户外曝晒的7倍。结论 基于3种典型材料研究可知,汽车零部件阳光模拟加速试验与典型户外自然曝晒具有一定相关性。     

工业型煤复合粘结剂的研制

根据高聚物相似互溶、扩散渗透原理,采用苎麻黑液、造纸黑液、酒糟废水、淀粉黄浆废水等10种高浓度有机废水(液)作为原料,研制成用于工业型煤的复合粘结剂,使高浓度有机废水(液)得到经济、合理的资源利用。这种粘结剂中含有多种天然高分子物质,可交联成三维空间网状结构,使工业型煤具有较高的机械强度和防潮抗水性能,并同时解决了燃煤和高浓度有机废水(液)的环境污染问题。     

PDMDAAC系列絮凝剂的脱色性能研究

研究了二甲基二烯丙基氯化铵聚合物（PDMDAAC）系列絮凝剂对活性染料废水和分散染料废水的脱色效果，考察了絮凝剂的特性粘度、阳离子度及结构等因素对脱色效果的影响，探讨了其脱色机理，并试验了与PAC复配的脱色效果。实验结果表明：絮凝剂的特性粘度越高，阳离子度越高，脱色效果越好；絮凝剂结构中引入乙烯基三甲氧基硅烷（VTMS）可使脱色效果胡所提高；PDMDAAC系列絮凝剂处理活性染料废水的机理是通过电中和作用，使染料分子从水中析出，然后通过吸附架桥作用使之聚集、沉降除去；PDMDAAC系列絮凝剂在处理分散染料废水时，吸附架桥为主导作用；PDMDAAC系列絮凝剂与PAC复配可使脱色效果更佳而且可以降低处理成本。     

Preparation and characterization of a novel hybrid chelating material for effective adsorption of Cu(Ⅱ) and Pb(Ⅱ)

The discharge of heavy metal ions such as Cu~2+and Pb~2+poses a severe threat to public health and the environment owing to their extreme toxicity and bioaccumulation through food chains Herein, we report a novel organic–inorganic hybrid adsorbent, Al(OH)_3-poly(acrylamide dimethyldiallylammonium chloride)-graft-dithiocarbamate(APD), for rapid and effectiv removal of Cu~2+and Pb~2+. In this adsorbent, the "star-like" structure of Al(OH)3 poly(acrylamide-dimethyldiallylammonium chloride) served as the support of dithiocarbamat(DTC) functional groups for easy access of heavy metal ions and assisted development of larg and compact floccules. The synthesized adsorbent was characterized by scanning electron microscopy(SEM), transmission electron microscopy(TEM), Fourier transform infrared spectroscopy(FTIR), and thermogravimetric analysis(TGA). APD was demonstrated to hav rapid adsorption kinetics with an initial rate of 267.379 and 2569.373 mg/(g·min) as well a superior adsorption capacities of 317.777 and 586.699 mg/g for Cu~2+and Pb~2+respectively. Th adsorption process was spontaneous and endothermic, involving intraparticle diffusion and chemical interaction between heavy metal ions and the functional groups of APD. To assess it versatility and wide applicability, APD was also used in turbid heavy metal wastewater, and performed well in removing suspended particles and heavy metal ions simultaneously through flocculation and chelation. The rapid, convenient and effective adsorption of Cu~2+and Pb~2+give APD great potential for heavy metal decontamination in industrial applications.     

以可生物降解固体为碳源的城市污水厂尾水反硝化脱氮研究

针对城市污水厂尾水氮排放不达标的现象,提出以可生物降解聚合物作为固体碳源的反硝化生物滤池技术。研究结果表明,尾水中氮的去除率会随水力停留时间(HRT)的延长而增加,HRT≤8 h时,去除率增长速度较快;HRT>8 h时,脱氮效率增长趋于平缓。选用聚羟基丁酸戊酸共聚酯(PHBV)为碳源,HRT为8 h时脱氮效果最佳,连续稳定运行30 d,出水硝态氮的去除率达96.1%~97.4%,出水中总氮浓度达GB 3838—2002《地表水环境质量标准》Ⅴ类水标准。     

不同类型清水剂处理油田含聚污水的效果对比

考察了阳离子型CWC-14、非离子型NQS-01和阴离子型AQS-08 3类清水剂对油田含聚污水的处理效果,对比了它们的作用特点和絮体性能。实验结果表明:在清水剂加入量350 mg/L、处理温度65℃、搅拌转速300 r/min、搅拌时间5 min的条件下,CWC-14、NQS-01和AQS-08对含聚污水的除油率分别为98.8%、98.0%和99.4%;NQS-01受处理温度、搅拌条件影响较大;CWC-14受污水中聚合物质量浓度影响最大。清水剂的絮体特点与其作用机理有关,CWC-14的絮凝速率最快,起效时间最短,絮体呈黏性大块状;NQS-01的絮凝速率最慢,起效时间最长,絮体呈浮油状;AQS-08的絮凝速率和起效时间适中,絮体呈松散状、流动性好。对比结果表明,非阳离子型清水剂可有效避免油田含聚污水处理过程中的黏性油泥问题。     

不饱和季铵盐的合成及其聚合物在化工及环保领域的应用

按不饱和基团的类型对不饱和季铵盐进行了分类,并综述了其合成方法。介绍了其聚合物在含油污水处理、抗菌、纺织品、新材料等领域的应用。阐述了在不饱和季铵盐的开发及其聚合物的应用方面存在的问题。指出了今后的发展方向:应该加大科研投入,加快新型不饱和季铵盐的研发进程,特别是在主结构设计、纯度提高以及新型絮凝剂单体的多样性方面,以制备出多功能性的单体和聚合物。     

Biodegradability,hydrolytic degradability,and builder performance in detergent formulations of partially dicarboxylated alginic acid

Partially dicarboxylated alginic acids with degree of dicarboxylations from 13 to 61 mol% were prepared and their biodegradability, hydrolytic degradability, and builder performances in detergent formulations were measured. Also, the correlations between biodegradability and hydrolytic degradability were examined with respect to the degree of dicarboxylation. The biodegradability of dicarboxylated alginic acid sodium salt (DCAa), evaluated by biochemical oxygen demand with activated sludge, depended on the degree of dicarboxylation. DCAa containing more than 75 mol% remaining uronide residues in the polymer chain showed excellent biodegradation. Hydrolytic degradation of DCAa depended on the degree of dicarboxylation and the pH of the incubation media. After 30-day incubation at 30°C at pH 4–6, a significant molecular weight reduction by hydrolytic degradation was observed for highly dicarboxylated alginic acid. DCAa with a high degree of dicarboxylation showed excellent builder performance in detergent formulations based on the detergency and calcium sequestration capacity.     

聚合物在粘土及钻井液固体颗粒表面的吸附

围绕废弃钻井液的处理,采用非分散红外TOC仪测聚合物吸附量,研究了聚合物PAM、PHP、FA367、CPAM在粘土及钻井液固体颗粒表面的吸附特性,研究结果表明聚合物在粘土颗粒表面的吸附是高度不可逆的,聚合物高分子与粘土因氢键、静电及嵌入三种相互作用方式而吸附,阳离子型聚合物絮凝剂在钻井液固体颗粒表面比阴离子和非离子型絮凝剂有高得多的吸附性能,废弃钻井液的絮凝主要以“吸附架桥”机理为主。