羟基铝及复合改性蒙脱石对As(V)的去除性能

采用无机羟基铝及阳离子表面活性剂十六烷基三甲基溴化铵对天然蒙脱石进行无机及复合改性。在吸附过程中研究了反应时间、投加量和pH等变量对吸附性能的影响,同时进行吸附动力学及吸附等温线研究,吸附规律符合Langmuir等温方程式。采用X射线衍射、X射线荧光、傅里叶红外光谱等表征手段对未改性及改性蒙脱石进行性能表征。研究结果表明,羟基铝及复合改性蒙脱石对As(V)具有良好的吸附性能,在pH为4～10,初始砷浓度为2 mg/L,改性蒙脱石对As(V)的去除率接近99%。吸附机理主要为羟基铝表面络合吸附和静电吸附。     

利用废弃物衍生燃料的热化学处理法制富含氢气合成气

为了探讨利用热化学方式从城市垃圾中制取富含氢气合成气过程的要素影响,解析氢气发生特性及其与主要影响要素之间的关系。在分析了城市生活垃圾组分特性的基础上,将其加工成组分均一的废弃物衍生燃料(refuse de-rived fuel,RDF),并在700、800和900℃等3个温度条件下,分别开展了RDF的热解、气化及水蒸汽气化等实验。研究表明,RDF的加工不但可有效降低垃圾含水率,还可将垃圾热值提高近1倍。温度和添加水蒸汽是从RDF中制取富含氢气合成气过程中的关键影响要素。其中,温度对氢气生成起到至关重要的决定作用,温度的提高对促进H2浓度的提高有利,同时,在气化过程中添加水蒸汽,可有效促进CO和H2等有价气体组分生成。在900℃的高温水蒸汽气化处理过程中,可获得H2浓度最高为34.13%的合成气。另外,800℃热解过程所产生的合成气热值最高,达到14 509 kJ/Nm3。     

MFC-MBR耦合系统运行效果

膜生物反应器(MBR)是一种高效的污水处理工艺,而微生物燃料电池(MFC)能有效降解污泥中的胞外生物有机质(EBOM)并回收电能.将MFC与MBR联用,建立了一套能够有效抑制膜污染同时回收电能的新系统——MFC-MBR耦合系统,MBR的剩余污泥经MFC处理后回流.以传统MBR为对照,对耦合系统中污水处理效果、膜污染情况和污泥混合液的性质进行研究.研究表明,耦合系统的污水处理效果没有明显恶化,COD去除率为94％,NH4+-N的去除率为92％.耦合系统能够有效减缓膜污染的发生,清洗周期延长了28％.污泥混合液的MLVSS/MLSS稳定在80％ ～ 88％,系统内几乎没有无机颗粒积累.松散结合态胞外聚合物(LB-EPS)降低了48％,使污泥混合液性质得到改善.较低的污泥比阻(2.69×1012m/kg)和标准化毛细吸水时间(1.67 s·L/g MLSS),证明耦合系统污泥混合液脱水性能提高了.     

柠檬酸对褐土中DTPA提取态铜、镉含量及对紫花苜蓿吸收铜、镉的影响

为了阐述有机酸对土壤中重金属生物有效性的影响,通过盆栽实验,研究了Cu、Cd复合污染下柠檬酸对褐土中二乙基三胺五乙酸(DTPA)提取态铜和镉含量的影响,并探讨了柠檬酸对植物吸收铜、镉的影响。结果表明,土壤中DT-PA-Cu含量随柠檬酸添加量的增加而减小,添加高浓度铜(Cu 1 000)处理中,DTPA-Cu含量减小更明显。在添加低铜浓度(Cu600)处理下,柠檬酸添加量为2和12 mmol/kg时,土壤DTPA-Cu含量随土壤镉含量的增加而增加,而柠檬酸含量为5mmol/kg时,DTPA-Cu含量在低镉处理(Cd 1)时含量最低。紫花苜蓿中铜含量随柠檬酸添加量的增加明显降低。土壤中DTPA-Cd含量随柠檬酸添加量的增加而减小,且随铜添加量的增加而降低。紫花苜蓿中的镉含量随柠檬酸添加量的增加先增加后减小;在相同柠檬酸添加量处理时,紫花苜蓿中镉的含量随镉含量的增加而增加;在低镉处理下,铜的加入对较低柠檬酸浓度时紫花苜蓿镉含量影响不明显,但柠檬酸浓度为12 mmol/kg时,紫花苜蓿中镉含量随铜添加量的增加而明显增加。     

不同处理条件对石油污染土壤植物修复的影响

针对石油烃植物修复过程中的主要影响因素,研究了不同植物种类、不同土壤调理剂和菌剂使用等不同条件对土壤中石油烃植物修复效果的影响.结果表明,不同种类的植物修复可使总石油烃的年降解率达到37.8％ ～ 73.98％,其中大豆和碱蓬具有较好的修复效果;3种不同土壤调理剂对石油烃污染土壤修复的效果为商业添加剂＞牛粪＞蛭石;先微生物修复后种植植物的处理要优于单独的微生物修复及微生物、植物修复同步进行的处理.     

振动试验数据管理系统概述

随着近些年振动试验技术的快速发展,对于振动试验数据的保存、管理和统计提出了更高的要求。鉴于此,附属于试验室信息管理系统的振动试验数据管理系统作为振动试验有效的管理工具,必然会成为提升试验室振动试验能力、规范试验技术的有效工具。     

Is Urban Stream Restoration Worth It?1

Kenney, Melissa A., Peter R. Wilcock, Benjamin F. Hobbs, Nicholas E. Flores, and Daniela C. Martínez, 2012. Is Urban Stream Restoration Worth It? Journal of the American Water Resources Association (JAWRA) 48(3): 603-615. DOI: 10.1111/j.1752-1688.2011.00635.x Abstract: Public investment in urban stream restoration is growing, yet little has been done to quantify whether its benefits outweigh its cost. The most common drivers of urban stream projects are water quality improvement and infrastructure protection, although recreational and aesthetic benefits are often important community goals. We use standard economic methods to show that these contributions of restoration can be quantified and compared to costs. The approach is demonstrated with a case study in Baltimore, Maryland, a city with a legal mandate to reduce its pollutant load. Typical urban stream restoration costs of US$500-1,200 per foot are larger than the cost of the least expensive alternatives for management of nitrogen loads from stormwater (here, detention ponds, equivalent to $30-120 per foot of restored stream) and for protecting infrastructure (rip-rap armoring of streambanks, at $0-120 per foot). However, the higher costs of stream restoration can in some cases be justified by its aesthetic and recreational benefits, valued using a contingent valuation survey at $560-1,100 per foot. We do not intend to provide a definitive answer regarding the worth of stream restoration, but demonstrate that questions of worth can be asked and answered. Broader application of economic analysis would provide a defensible basis for understanding restoration benefits and for making restoration decisions.     

Anaerobic degradation of microcrystalline cellulose: kinetics and micro-scale structure evolution

The degradation kinetics and micro-scale structure change of microcrystalline cellulose during anaerobic biodegradation were investigated. A modified Logistic model was established to properly describe the kinetics, which showed good fitness and wide applicability for cellulose degradation. A maximum degradation rate of 0.14 g L⁻¹ h⁻¹ was achieved after cultivating for 51.5 h. This result was in good agreement with the scanning electron microscope and X-ray diffraction analysis. Channels of 400-500 nm size started to occur on the crystalline surface of cellulose at around the inflexion time. Accordingly, the crystallinity significantly decreased at this point, indicating a degradation of the crystalline structure zones by anaerobic bacteria. This study offers direct morphological evidence and quantitative analysis of the biodegradation process of cellulose, and is beneficial to a better understanding of the cellulose degradation mechanism.     

Enhanced resistance of yeast mutants deficient in low-affinity iron and zinc transporters to stannous-induced toxicity

Tin or stannous (Sn²⁺) compounds are used as catalysts, stabilizers in plastic industries, wood preservatives, agricultural biocides and nuclear medicine. In order to verify the Sn²⁺ up-take and toxicity in yeast cells we utilized a multi-elemental analysis known as particle-induced X-ray emission (PIXE) along with cell survival assays and quantitative real-time PCR. The detection of Sn²⁺ by PIXE was possible only in yeast cells in stationary phase of growth (STAT cells) that survive at 25 mM Sn²⁺ concentration. Yeast cells in exponential phase of growth (LOG cells) tolerate only micro-molar Sn²⁺ concentrations that result in intracellular concentration below of the method detection limit. Our PIXE analysis showed that STAT XV185-14c yeast cells demonstrate a significant loss of intracellular elements such as Mg, Zn, S, Fe and an increase in P levels after 1 h exposure to SnCl₂. The survival assay showed enhanced tolerance of LOG yeast cells lacking the low-affinity iron and zinc transporters to stannous treatment, suggesting the possible involvement in Sn²⁺ uptake. Moreover, our qRT-PCR data showed that Sn²⁺ treatment could generate reactive oxygen species as it induces activation of many stress-response genes, including SOD1, YAP1, and APN1.     

Concentrations of organochlorine pesticides and 2,4,6-trichloroanisole in cork bark

Organochlorine pesticides are persistent lipophilic organic pollutants and tend to accumulate in growing plants. During growth, cork is in contact with the open air for long periods (9-12 years). Owing to the previous widespread use of organochlorine pesticides and their high persistence in the environment, there is a risk that residues of such pesticides may be present in cork.In this study, the concentrations of 14 organochlorine pesticides—all of which are indicators of environmental pollution—were analyzed in cork bark samples from three regions in Spain and one in Portugal. In addition, the concentrations of 2,4,6-trichlorophenol (TCP) and 2,4,6-trichloroanisole (TCA) were also analyzed.Our results show only very low concentrations of lindane, γ-HCH (<2.6 ng g⁻¹) and its byproducts α-HCH (<3.5 ng g⁻¹) and β-HCH (<0.6 ng g⁻¹).Among the DDT and its metabolites, only two were found: p,p′-DDT was found in a cork sample from Extremadura (0.1 ng g⁻¹) and p,p′-DDE was present at a maximum concentration of 2.9 ng g⁻¹ in a cork sample from Castile-La Mancha. However, all concentrations were well below the legal limit established by Regulation (EC) No. 396/2005 (10 ng g⁻¹ in foodstuffs). We can conclude, therefore, that the cork samples we studied complied with food safety standards.