Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

Assessing Impact of Urbanization on River Water Quality In The Pearl River Delta Economic Zone, China

The Pearl River Delta Economic Zone is one of the most developed regions in China. It has been undergoing a rapid urbanization since the reformation and opening of China in 1978. This process plays a significant impact on the urban environment, particularly river water quality. The main goal of this present study is to assess the impact of urban activities especially urbanization on river water quality for the study area. Some Landsat TM images from 2000 were used to map the areas for different pollution levels of urban river sections for the study area. In addition, an improved equalized synthetic pollution index method was utilized to assess the field analytical results. The results indicate that there is a positive correlation between the rapidity of urbanization and the pollution levels of urban river water. Compared to the rural river water, urban river water was polluted more seriously. During the urban development process, urbanization and urban activities had a significant negative impact on the river water quality.     

考虑应变速率影响的混凝土重力坝非线性地震响应分析

通过引入应变速率、损伤变量以及刚度退化指标等参数,建立了应变率相关的混凝土弹塑性损伤模型。运用该模型对某重力坝厂房坝段分别就率相关及率无关两种情况进行了三维非线性地震响应时程分析。深入研究了混凝土应变速率等相关特性对结构动力响应的影响。结果表明,应变速率对混凝土的力学性能有一定的影响,随着应变速率的增加,坝体结构的变形减小,主拉应力有所提高,应变能有所减小以及开裂损伤有一定的降低。所得结论对混凝土重力坝的震害研究有一定的参考价值。     

拉索预应力空间网格结构的索张力计算及张拉全过程分析

实际工程中,对于拉索预应力空间网格结构的索张拉是一个需要反复调整的繁琐过程。对此,提出了一种针对多阶段多批次张拉施工全过程分析的计算方法,用以提高索张拉施工的效率。该法通过不断减小拉索实际张力与目标张力的差值来求解各索在张拉过程中应该产生的初始应变,最后只要利用计算结果并按照预定的顺序张拉,便可使所有索只经过一次张拉就能最终达到各自的目标张力值。对一个150 m跨度的拉索预应力球面巨型网格结构进行了计算,并利用计算结果,对结构的杆件内力和最大节点位移进行了张拉全过程跟踪分析。结果表明,在实际工程中采用上述方法进行计算与张拉是切实可行的,另外,在张拉过程中进行跟踪分析十分必要。     

风险分析基本方法探讨

面对未来不利事件的不确定性,对其情景的认识只能进行风险分析。人们研究出了许多的风险分析方法,但基本方法只有5种:发生概率计算法、暴露评价法、危险辨识法、期望值计算法和经验合成法。它们的共同点是:(1)明确具体风险内涵,框定风险问题涉及的系统;(2)涉及风险源、影响和后果;(3)进行不确定意义下的量化分析。由此我们总结出风险分析基本原理,并确认了自然灾害风险分析基本原理和自然灾害风险分析的基本模式。     

基于渗流-应力耦合分析的野鸡尾尾矿坝稳定性研究

基于渗流场与应力场耦合机理,对柿竹园野鸡尾尾矿坝进行稳定性研究。研究渗流-应力的耦合效应,提出了渗流-应力耦合以及渗流体积力计算的实施方案;建立二维的有限元渗流-应力耦合计算模型,分析了考虑耦合效应时的尾矿坝渗流场、位移场、应力场;最终分析了不同耦合关系对于渗流量、位移场、等效渗透集中力以及应力场的影响。研究结果表明:当前水力条件下,尾矿坝稳定性良好;尾矿坝主要受水平渗透力作用,初期坝坝顶、坝脚以及坝底等处应力集中;尾矿坝的渗流-应力作用不容忽视,不同的耦合关系对于x方向位移、渗透力的预测影响巨大;考虑渗流-应力耦合关系得到的主应力、剪应力以及竖向位移,比不考虑耦合效应时大。     

陕北焦炭行业中焦炉煤气发电的环境影响研究

介绍了陕北焦炭行业现状,运用环境影响评价的方法研究了陕北焦炭行业中焦炉煤气发电的环境影响,研究表明焦炉煤气发电工程具有较好的环境效益,它可以在全国焦炭行业尤其是小焦化集中区起到示范作用。     

淮南市可吸入颗粒物研究的若干建议

由于可吸入颗粒物严重影响大气环境质量和人体健康,对其研究愈来愈受到重视.我国北京、南京、重庆等城市对可吸入颗粒物均做过系统的研究,而目前在淮南市仍是空白.总结近年来可吸入颗粒物方面的研究成果,对淮南市在此方面的研究提出若干建议,供研究者参考.     

基于数据库的植物功能性状研究现状文献计量学分析

植物功能性状数据库是功能生态学研究的重要工具.了解基于植物功能性状数据库的植物功能性状研究现状,对探讨功能多样性和生物多样性具有重要的指导意义.介绍植物功能性状数据库的类型、影响力的评价方法和使用方法,并整理了17个植物功能性状库(附表).同时,通过Web of Science检索了2008-2018年间基于植物功能性...