Removal of perfluorinated surfactants from wastewater by adsorption and ion exchange——Influence of material properties,sorption mechanism and modeling

Perfluorooctane sulfonate(PFOS) has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N_2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force(LDF) approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.     

北方高盐景观水体氮磷时空分布特征及富营养化评价

为掌握北方高盐景观水体的水环境状况,选取天津市中新生态城3个景观水体(清净湖、蓟运河和蓟运河故道)为研究对象,于2013年12月—2014年11月对其进行定期取样监测,开展水体氮磷污染特征分析及富营养化评价。结果表明:1)蓟运河、清净湖和蓟运河故道的TDS均值分别为3.42,4.64,20.2 g/L,属于高盐景观水体;2)水体TN和TP浓度逐月变化显著,水质整体上冬春季优于夏秋季,其中蓟运河TP和TN的浓度最大,且波动较大;3)根据TN/TP比值判定,研究区水体除清净湖在短时间表现为氮限制外,水体大部分时间段内表现为磷限制,P为主要限制因子;4)富营养化评价表明:水体均处于富营养状态,且有蓟运河蓟运河故道清净湖;5)相关性结果表明:TDS与电导率、水温及EI呈显著正相关,相关系数分别为0.905、0.822和0.645,盐度也是影响富营养化的关键因素。     

南京江北核心区气候环境宜居性评价

气候环境条件是影响宜居的一个重要因素。运用多层次评价模型,从气象灾害、大气环境、人体健康及生态气象等4个层面筛选出20项指标,构建区域气候环境宜居性的评价体系,基于层次分析法(AHP)确定各指标的权重,并以南京江北核心区为例,对其宜居水平进行评价。结果表明:在青奥生态建设期间(2011—2014年),研究区的宜居水平整体呈上升趋势,属于宜居范畴,接近非常宜居的标准。这反映青奥会期间的环境整治与灾害防治工作初见成效,对江北核心区的宜居性起正效应作用。     

小城镇产业集群主要污染源筛查与影响分析

以郫县安德镇川菜产业园为研究对象,采用等标污染负荷法对污染影响进行了标准化评价。结果发现:川菜产业园主要的工业污染行业为豆制品加工行业,排污量为2 919.94 t/a,占总排污量的96.46%,等标污染负荷为9.83,占总污染负荷的92.83%,其中有6家企业为主要控制对象。对比分析发现,环境污染受企业规模、末端处理方式、废水排放量等多方面因素共同影响。所有污染因子中,BOD对环境的实质污染影响较大。该研究成果将为优化小城镇产业集群的规划、管理和污染物总量控制提供有价值的参考。     

焙烧温度对CeO_2(ZrO_2)/TiO_2选择性催化脱硝性能的影响

采用溶胶-凝胶法并以不同温度焙烧制备一系列CeO_2(ZrO_2)/TiO_2(CZT)催化剂,考察了CZT催化剂固相结构、酸量、比表面积等性能与催化活性的关系。采用XRD、BET、NH3-TPD、H2-TPR以及XPS等表征技术对催化剂进行表征。结果表明:焙烧温度为450℃时CZT催化剂具有最高的催化活性,其在240~400℃的温度窗口内活性均高于90%,且具有较好的抗水和抗硫中毒能力。随着焙烧温度的提高,催化剂表面的Ce和Zr原子进入体相晶格且Ce0.5Zr0.5O2向Ce0.75Zr0.25O2转变,导致催化剂的储释氧能力和氧化还原性能降低。另外,锐钛矿和金红石型TiO_2晶粒尺寸的增加,催化剂的有效比表面积和总酸量降低,因此CZT催化活性随着焙烧温度的提高而有所降低。换言之,大的比表面积、良好的氧化还原性能、表面Ce4+的富集以及酸性位的增多均有利于NH3-SCR活性的提高。     

Effect of MoO3 on vanadium based catalysts for the selective catalytic reduction of NOx with NH3 at low temperature

The selective catalytic reduction(SCR) activities of the MoO_3 doped V/WTi catalysts prepared by the incipient wetness impregnation method at low temperature were investigated.The results showed that the addition of MoO_3 could enhance the NO_ xconversion at low temperature and the best SCR activity was obtained when the dosage of MoO_3 reached5 wt.%. The NH3-TPD and DRIFTS experiments indicated that the addition of MoO_3 changed the type and number of acid sites on the surface of catalysts and reaction activities of acid sites were altered at the same time. The redox capacity and amount of active oxygen species got improved for V3Mo5/WTi catalyst, which could be confirmed by the H_2-TPR and transient response experiments. Water vapor inhibited the NO_xconversion at low temperature. Deposition of ammonium sulfate or bisulfate might be main reason for the loss of catalytic activity in the presence of SO_2 at low temperature. Choosing the suitable NH_3/NO ratio and elevation of reaction temperature both could weaken the influence of SO_2 on the SCR activity of the V3Mo5/WTi catalyst. Thermal treatment of the deactivated catalyst at350°C could get the low temperature activity recovered. The decrease of GHSV improved the de NO_x efficiency at low temperature and we speculated that the rational technological process and operation parameters could contribute to the application of this kind of catalysts in real industrial environment.     

铁炭内电解垂直流人工湿地对污水厂尾水深度脱氮效果

针对污水厂尾水总氮(TN)含量偏高、微生物可利用碳源低的问题,构建铁炭内电解垂直流人工湿地(ICIE-VFCW)装置,研究了ICIE-VFCW对尾水的处理效果,并采用紫外-可见光光谱(UV-VIS)、凝胶过滤色谱(GFC),进一步探讨了ICIEVFCW强化脱氮机制.结果表明,ICIE-VFCW可提高系统对尾水中COD的去除,出水COD可稳定在30 mg·L~(-1)以下,全年、暖季、寒季COD平均去除率较普通垂直流人工湿地分别可提高10.16%、9.81%、11.22%.系统出水TN可维持在10 mg·L~(-1)以下,全年、暖季、寒季TN平均去除率较普通垂直流人工湿地分别提高13.72%、12.90%、16.17%.经过人工湿地处理后,污水中有机物的腐殖度、芳香度及相对分子质量(Mr)均有所下降,且ICIE-VFCW中Mr下降更为明显.湿地基质掺杂铁炭可促进尾水中大分子有机物转化为小分子,为微生物提供更多可利用碳源,从而提高脱氮效率.     

某站场对焊法兰环焊缝缺陷原因分析

目的研究法兰环焊缝缺陷产生的原因,采取相应针对性措施,预防泄露事故发生。方法通过宏观分析、超声检测、化学成分分析、金相分析、能谱分析对环焊缝裂纹形成原因进行分析。结果裂纹起源于根焊焊材与母材间,两端较为平滑,沿环焊缝周向方向扩展。焊缝中夹渣的残留药皮和层间未熔合缺陷,是形成裂纹的内在原因。结论焊缝产生裂纹由焊接参数控制不当引起的。     

基于遗传神经网络的除湿机故障诊断与寿命预测

目的识别除湿机的性能状态和预测吸附剂的剩余寿命。方法针对除湿机故障过程缓变的特点,提出一种基于数据驱动的遗传神经网络模型。首先,为解决设备失效程度划分模糊的问题,由5个热力参数组成反映吸附剂劣化程度的特征向量,关联分析得到除湿机的5类故障模式。其次,利用遗传神经网络建立状态参数和故障模式的映射关系。最后,对表征设备吸附能力的主参数进行外推预测。结果训练好的诊断网络可准确地识别出设备的劣化程度及其演变过程,预测网络的预测精度非常高。结论该方法可有效地实现对除湿机的故障诊断与预测。。     

航空装备外场级平均修复时间评估研究

目的探索航空装备部队使用保障阶段维修性指标评估的实施方法。方法构建航空装备外场级平均修复时间评估指标体系,包括评估条件界定、统计准则确定、数据处理方法、评估流程、使用表格等,并结合具体机型进行评价应用。结果该机型飞机整机的累计修复时间为138.5 h,平均修复时间Mct=2.17 h,满足不大于3 h指标要求。结论评估方法系统科学,可为各类装备开展相关维修性评估工作提供方法支持和工程借鉴。