Study of Trace Elements and Soot in Aerosols from a Coal-Fired Power Plant in Northern Vietnam

Two measurement campaigns were conducted in two sampling sites, An Thinh and Duy Minh, in northern Vietnam during the months of November–December 2000 and November 2001–February 2002 in order to investigate the extend of the particulate air pollution from the Pha Lai coal fired power plant. Fine particle samples were analyzed by Energy Dispersive X-Ray Fluorescence spectrometry and soot samples were analyzed by reflectometer. The result showed that high concentration of soot and elements mostly coincided with the air masses originating from the power plant. Sea spray aerosol was found to be the major source of chlorine at both sites. Ratios of specific elements and principal component analysis (PCA) revealed that coal combustion was the main contributor to the air pollution at both sites. PCA also indicated that there were other sources responsible for the elements emission, probably the influence of long distance transport and Asian Brown Cloud.     

Results of An Indoor Size Fractionated PM School Sampling Program in Libby, Montana

Libby, Montana is the only PM_2.5 nonattainment area in the western United States with the exceptions of parts of southern California. During January through March 2005, a particulate matter (PM) sampling program was conducted within Libby’s elementary and middle schools to establish baseline indoor PM concentrations before a wood stove change-out program is implemented over the next several years. As part of this program, indoor concentrations of PM mass, organic carbon (OC), and elemental carbon (EC) in five different size fractions (>2.5, 1.0–2.5, 0.5–1.0, 0.25–0.5, and <0.25 μm) were measured. Total measured PM mass concentrations were much higher inside the elementary school, with particle size fraction (>2.5, 0.5–1.0, 0.25–0.5, and <0.25 μm) concentrations between 2 and 5 times higher when compared to the middle school. The 1.0–2.5 μm fraction had the largest difference between the two sites, with elementary school concentrations nearly 10 times higher than the middle school values. The carbon component for the schools’ indoor PM was found to be predominantly composed of OC. Measured total OC and EC concentrations, as well as concentrations within individual size fractions, were an average of two to five times higher at the elementary school when compared to the middle school. For the ultrafine fraction (<0.25), EC concentrations were similar between each of the schools. Despite the differences in concentrations between the schools at the various fraction levels, the OC/EC ratio was determined to be similar.     

中国煤电和核电的环境影响与健康风险比较

将煤电与核电的环境影响和健康风险从全燃料链角度进行比较 ,结果表明 ,煤电燃料链的环境影响和健康风险比核电燃料链大。     

家庭生活用水与室内氡浓度研究与进展

文章论述了家庭生活水的氡浓度水平、生活用水对室内氡的贡献、水的使用过程中室内氡行为以及含氡水的使用与辐射照射剂量的关系等问题。指出家庭生活水的氡浓度高时,是室内氡的一个不可忽视的来源。对氡浓度特别高的家庭用水,建议先用活性炭等进行吸附后再使用。     

水平管内不同煤质煤尘爆炸火焰传播特性实验研究

为研究水平管道空间不同煤质煤尘爆炸火焰传播特性,选取褐煤、长焰煤、不粘煤、气煤4种煤尘,对爆炸火焰焰峰特性、火焰加速传播特性、火焰传播距离与持续时间展开研究。研究结果表明:褐煤在500 ms内焰峰的形状由尖锐向平滑再向钝化不断演变,长焰煤与不粘煤在375 ms时焰峰前端出现明显焰体分离现象,分析认为这与管体冷壁效应、空间尺度效应及空间氧气消耗直接相关;气煤在375 ms时焰峰出现大面积火焰碎纹,说明气煤爆炸火焰猛烈传播的持续时间相对较短,整体爆炸强度相对较弱;褐煤与长焰煤爆炸火焰存在2次间断性加速,分析认为这与管体空间受限、常温管壁散热、局部助燃氧气瞬间不足等因素有关;褐煤在爆炸后400～600 ms内火焰2次加速完全,火焰传播距离达740 mm,明显大于长焰煤、不粘煤与气煤,说明低变质褐煤爆炸火焰持续时间更长,火焰传播距离更远且传播更剧烈;虽然气煤火焰最远传播距离比长焰煤大30 mm,但由于气煤火焰在375 ms左右出现大片火焰碎纹,因此气煤整体的爆炸强度小于长焰煤。     

Characterization of coffee residues pellets and their performance in a residential combustor

Spent coffee grounds (SCG) and coffee husks (CH) were evaluated as biofuels, after densification, for energy production. CH represent a specific problem for the coffee industry due to a low calorific value, high ash content, and a very low bulk density. Hence, the energetic potential of SCG (95 wt%)/CH (5 wt%) blend and pure SCG (100%) were examined. The blend of SCG and CH was limited to 5 wt% of CH because of the low bulk density of CH. Therefore, physicochemical and energetic characterizations of the produced pellets were performed. Thermogravimetric analyses were performed under nitrogen and air atmospheres to evaluate the CH behavior in the blend. Characterization study shows that both produced pellets could reach the French Agropellets standard (AQI). Thermal degradation showed that the mean reactivity of the SCG/HC pellets was higher than pure SCG. Then, combustion experiments were performed in a domestic combustor, after modification of the boiler power in order to improve its energetic performances. The presence of CH led to a rise of CO, NOx, VOC’s, and particle emissions. Nevertheless, the performances of the biofuels are almost in agreement the NF EN 12809 standard.     

某典型化工污染场地土壤修复方案研究

以典型化工污染场地为研究对象,构建适合该场地的修复技术筛选体系,筛选最佳修复方法。根据特征污染筛选结果、场地修复目标及业主需求等因素,通过室内模拟实验、施工现场微调等方法,确定污染场地最优修复方案。结果表明,作为Cd、苯并[a]芘复合污染场地,根据筛选体系结合Topsis法进行评估,确定场地修复技术为异位化学淋洗。运用响应曲面法,采用BoxBehnken设计多因素实验进行室内模拟,确定最佳修复条件。采用0.6mol/L柠檬酸与20g/Lβ-环糊精进行复配的淋洗剂,在pH=3.0、淋洗温度35.00℃、液固比(淋洗剂与土壤的体积质量比)6.00mL/g、搅拌强度320.00r/min下,淋洗4次,每次淋洗3.4h,对某化工污染场地进行修复,修复后土壤中Cd、苯并[a]芘的去除量分别为69.88、39.20mg/kg,去除率分别达80.14%、70.50%,达到预期修复目标。     

Wood-Specific Polycyclic Aromatic Hydrocarbon (PAH) Patterns in Soot Using Gas Chromatography-Atmospheric Pressure Laser Ionization-Mass Spectrometry (GC-APLI-MS)

If organic matter is burnt, the combustion of wood produces the highest amounts of polycyclic aromatic hydrocarbons (PAHs) compared with other fossil energy sources such as oil, coal, or gas. Emissions from wood combustion are increasingly of special interest due to the rising use of wood as a renewable energy source in residential heating in Europe. To the authors' knowledge, reproducible wood-specific PAH patterns in soot were identified for the first time by use of a sampling interval of only 5 min in this study. The short sampling interval was enabled by the very sensitive analytical method of gas chromatography–atmospheric pressure laser ionization–mass spectrometry (GC-APLI-MS) applied. The analysis of 40 PAH of soot from wood logs of spruce, pine, larch (softwood) and beech, birch, oak (hardwood), and wood pellets, as well as wood briquettes, showed 13.46–250.62 mg/kg for ∑40 PAH and 10.75–177.94 mg/kg for the U.S. Environmental Protection Agency PAH standard (without acenaphthylene and anthracene). Highest concentrations occurred in the samples from birch with bark, beech, and wood briquettes. Indeno[1,2,3-cd]pyrene, naphthalene, and alkylated naphthalenes were also detected. Significant concentrations of the very toxic dibenzopyrenes (up to 11.30 mg/kg) are reported. Softwood soot contained highest amounts of 2–4-ring PAH, followed by hardwood which is in accordance with the presence of highest amounts of abietic acid in softwood, a known precursor of retene and phenanthrene. PAH in soot from five spruce samples from different locations show a mean ∑40 PAH concentration of 13.46 mg/kg (n = 5, minimum 8.03, maximum 23.32 mg/kg, SD = 5.65) and exhibited a typical pattern that differed from all other wood soot samples. The distributions of alkylated naphthalenes of the spruce samples show a bell-shape distribution in contrast to the alkylated phenanthrenes/anthracenes of all samples (except the wood pellets), showing a slope distribution. The data indicate that wood-specific PAH patterns exist and under the applied conditions, spruce logs produced the least toxic soot.     

煤气脱硫废料综合利用新工艺

针对煤气脱硫废料（简称废料）的成分（硫、碳、萘及少量其他有机物）,提出了一种处理废料的新工艺,先用乙酸乙酯提取废料中的萘和少量其他有机物,再用复合溶剂B加热溶解废料,热过滤得碳粉,最后将溶液冷却结晶分离出硫。实验结果表明：在乙酸乙酯与废料的质量比（R1）为3.75,提取温度为60℃,提取时间为4h的条件下,萘回收率为98%,纯度大于等于70%,在复合溶剂B与提取剩余物的质量比（R2）为2.69,过滤温度为100℃的条件下,硫回收率接近100%,纯度大于等于99%,碳回收率和纯度为100%。     

凝胶模板燃烧法制备纳米ZnO及其光催化性能

以硝酸锌为原料,明胶为模板分散剂,采用凝胶模板燃烧法制备纳米ZnO.利用TG-DTA,FT-IR,XRD,TEM和HPLC等手段对制备过程、样品的结构和性能进行了研究,探讨燃料及氧化剂的比例以及热处理温度的变化对产物粒径和光催化活性的影响.结果表明:产物粒子形状为球形,属六方晶系结构且无杂相.以染料罗丹明B溶液为目标降解物,1h的降解率为99.9%,最佳光催化剂的合成条件为:燃料与氧化剂的比例为0.84,400℃热处理3h.