一种湿度计的校准方法——测量不确定度分析校准法

本文提出了校准湿度计的一种新方法一测量不确定度分析校准法,以利用5121湿度发生器校准可输出（0-5）V的湿度传感器的基本误差为例,介绍了其校准方法确定了该方法校准湿度计的置信度和准确葭：     

The Iowa Graduated Driver Licensing program: effectiveness in reducing crashes of teenage drivers

PROBLEM: Graduated Driver Licensing (GDL) programs vary in the United States in terms of implementation and restrictions. The State of Iowa's GDL program is assessed for its effectiveness in reducing crashes among teenage drivers. METHOD: Time series analysis was used to evaluate police documented crashes involving 16-, 17-, and 18-year-old drivers over a 10 year period, with an intervention identified at the point of GDL implementation. RESULTS: After controlling for seasonal trends and auto-correlative effects, a significant reduction in the crash rate of and 16- and 17-year-old drivers was observed due to the GDL implementation. However, there were no significant reductions in crash rates for 18-year-old drivers. DISCUSSION: The analyses suggest that the Iowa GDL program is effective in reducing the crash rates of 16- and 17-year-old drivers but the effects do not sustain for 18-year-old drivers. IMPACT ON INDUSTRY: The results suggest that the program appears to be working, however further analysis is needed to determine what factors are preventing lasting effects for these teenage drivers.     

Individual risk analysis of high-pressure natural gas pipelines

Transmission pipelines carrying natural gas are not typically within secure industrial sites, but are routed across land out of the ownership of the pipeline company. If the natural gas is accidentally released and ignited, the hazard distance associated with these pipelines to people and property is known to range from under 20 m for a smaller pipeline at lower pressure to up to over 300 m for a larger pipeline at higher pressure. Therefore, pipeline operators and regulators must address the associated public safety issues.This paper focuses on a method to explicitly calculate the individual risk of a transmission pipeline carrying natural gas. The method is based on reasonable accident scenarios for route planning related to the pipeline's proximity to the surrounding buildings. The minimum proximity distances between the pipeline and buildings are based on the rupture of the pipeline, with the distances chosen to correspond to a radiation level of approximately 32 kW/m². In the design criteria for steel pipelines for high-pressure gas transmission (IGE/TD/1), the minimum building proximity distances for rural areas are located between individual risk values of 10⁻⁵ and 10⁻⁶. Therefore, the risk from a natural gas transmission pipeline is low compared with risk at the building separated minimum distance from chemical industries.     

Oil spill cleanup cost estimation—Developing a mathematical model for marine environment

The field of oil spill cost modelling is not as well explored as desirable. Generally speaking, the existing models have either low accuracy, in that their predictions are far from the real cost, or low applicability, in that they are only valid under very specific conditions; such as in one particular country. This work strives to construct a model that is functional in a global scope and still possess a high level of accuracy. The resulting attempt is in many ways superior to the publicly available competitors, not only because of its predictive capacity but also because the model is quick to use, and its input variables should be readily available to any informed user. The model is more accurate comparing with similar available models. However, further study is needed to modify it to obtain more realistic results.     

Leaching behavior of heavy metals from municipal solid waste incineration bottom ash and its geochemical modeling

With the increase in the number of municipal solid waste incineration (MSWI) plants constructed in China recently, great attention has been paid to the heavy metal leaching toxicity of MSWI residues. In this study, the effects of various parameters, including extractant, leaching time, liquid-to-solid ratio, leachate pH, and heavy metal content, on the release properties of Cd, Cr, Cu, Ni, Pb, and Zn from MSWI bottom ash were investigated. Partial least-squares analysis was employed to highlight the interrelationships between the factors and response variables. Both experimental research and geochemical modeling using Visual MINTEQ software were conducted to study the pH-dependent leaching behavior of these metals in fresh and weathered bottom ash, considering precipitation/dissolution and surface complexation reactions (adsorption by hydrous ferric oxide and amorphous aluminum oxide/hydroxide). The results showed that leachate pH was the predominant factor influencing heavy metal leachability. The leaching of Cu, Pb, and Zn was mainly controlled by precipitation/dissolution reactions, whereas surface complexation had some effect on the leaching of Cr, Cd, and Ni for certain pH ranges. The modeling results aggreed well with the experimental results. Part of this work was presented at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

Optimal Design of a Multi-Pollutant Air Quality Monitoring Network in a Metropolitan Region Using Kaohsiung, Taiwan as an Example

An air quality monitoring network (AQMN) usually performs the basic function of assessment of regional air quality and demonstration of compliance with ambient air quality standards in an urban area. Different pollutants, however, may present different characteristic variabilities due to their specific emission patterns, rates of diffusion, and transport and transformation behaviors. But the costs of siting in a pollutant-specific monitoring network would be higher than that for a common network with respect to several pollutants monitored simultaneously. This paper presents a survey of multi-pollutant design principles and optimal searches for siting patterns of an AQMN using both simulation and optimization models as a combined tool. While conservative, quasi-stable, and reactive pollutants are considered in the design principles, cost, coverage effectiveness, and spatial correlation characteristics are included in the multi-criteria decision making process. For illustrative purpose, a series of technical settings and two types of objectives were examined in the case study for the city of Kaohsiung in Taiwan.     

Agricultural Chemicals in the Alluvial Aquifer of a Typical County of the Arkansas Delta

Statistical methods and a Geographic Information System (GIS) were used to investigate potential indicators of ground water vulnerability to agricultural chemical contamination in a representative area of the Mississippi River alluvial aquifer. A total of 47 wells were sampled for analysis of nitrate, phosphorus, potassium, and 13 pesticides commonly-used in the area. Ten soil and hydrogeologic variables and five ground water vulnerability indices were examined to explain the variations of chemical concentrations. The results showed that no individual soil or hydrogeologic variables or their linear combinations could explain more than 25% of the variation of the chemical concentrations. A quadratic response surface model with the values of confining unit thickness, slope, soil permeability, depth to ground water, and recharge rate accounted for 62% of the variation of nitrate, 43% of P, and 83% of K, suggesting that the interactions among soil and hydrogeologic variables were significant. Observed trends of decreasing nitrate and P concentrations with increasing well depth and/or depth to ground water seemed to correlate with carbonate equilibrium in the aquifer and more reduced environment with depth. In view of uncertainties involved, it was recognized that the limitations associated with input data resolution used in GIS and the formulation of leaching indices limited their use for predicting ground water vulnerability. Misuse of pesticides could be another factor that would complicate the relationships between pesticide concentrations and the vulnerability indices.     

大气颗粒物样品中有机碳和元素碳的测定

采用元素分析仪测定大气颗粒物样品中有机碳、元素碳。应用商业化仪器元素分析仪 ,在燃烧炉温度为 4 50°C时 ,一步测出样品中有机碳的含量 ;再运用加酸的方法除去样品中的碳酸盐 ,然后在燃烧炉温度为 950°C时测出样品中有机碳、元素碳含量之和。通过差减计算 ,得出元素碳的值。有机碳、元素碳测量的标准偏差平均值分别为 0 2 5%、0 50 %。     

不同采样方法测算结果的分析与比较

通过瞬时采样、等时采样、等比例采样测算结果的分析和比较 ,说明用等比例采样法采集水样并核定出污染物的排放总量 ,解决了水样的代表性问题。