Preparation and coagulation efficiency of polyaluminium ferric silicate chloride composite coagulant from wastewater of high-purity graphite production

The aim of the present work was to produce a polyaluminium ferric silicate chloride (PAFSiC) coagulant from acidic and alkaline wastewater of purifying graphite by roasting, and subsequently to evaluate coagulation efficiency of the reagent by treating surface water from the Yellow River as well as municipal wastewater in comparison with the conventional coagulant polyaluminium chloride (PAC). The PAFSiC coagulant was prepared by co-polymerization. The effects of (Al+Fe)/Si molar ratio, OH/(Al+Fe) molar ratio (i.e., value), coagulant dosage and pH value of test suspension on the coagulation behavior of FAFSiC and the stability of the PAFSiC were also examined. Results showed that PAFSiC performed more efficiently than PAC in removing turbidity, chemical oxygen demand (COD), and total phosphate (TP). The PAFSiC with a value of 2.0 and (Al+Fe)/Si ratio of 5 (PAFSiC 2.0/5) showed excellent coagulation effect for both turbidity and COD, while PAFSiC 1.0/5 was the best for TP. The optimum coagulation pH range of PAFSiC 2.0/5 was 5.0–9.0, slightly wider than that of PAC (6.0–8.0). The process can be easily incorporated into high-purity graphite production plants, thereby reducing wastewater pollution and producing a valuable coagulant.     

广西近岸海域水质自动监测系统组成及其性能检测

广西近岸海域水质自动监测系统是一套以在线自动分析仪器为核心,运用现代传感器技术、自动测量技术、自动控制技术、计算机应用技术以及相关的专用分析软件和通讯网络所组成的一个综合性的在线自动监测体系。该系统可自动实现采样、分析、记录、数据处理及远距离数据传输等在线过程。文章介绍了该系统组成情况及其性能检测要点。     

硅烷热分解法制取工业硅的影响因素分析

现阶段制备工业硅所用的改良西门子方法存在能耗高和污染重的问题,因此寻求能耗低、环境友好型工业硅制备方法是必然趋势。通过硅烷分解实验对硅烷热分解法制备工业硅的几个影响因素做了分析,并简要讨论了各个因素对硅烷热分解的影响。得出硅烷热分解的最佳条件是硅烷浓度0.25%,载气流量为200 L/h,分解温度850℃,分解压强0.35kPa。在此条件下硅的沉积率89.3%。     

影响工业废水中BOD_5测定因素的分析与研究

采用稀释与接种法测定工业废水中的BOD5,并结合CODcr的测定结果,分析影响BOD5测定的因素如稀释倍数、接种液配比等条件进行试验后,得出了最佳试验条件,从而达到提高测定BOD5准确度的目的。     

承德市室内环境质量污染现状调查与研究

对承德市160家宾馆、饭店、歌舞厅等公共场所,80个民用建筑工程项目,80余家个人家庭装修进行室内环境检测,发现不同场所室内主要超标污染物不同,新建公共场所主要超标污染物为挥发性有机物、甲醛;已建成的重点公共场所空气超标污染物主要为茵落总数和CO2;民用建筑工程超标污染物主要为氨、甲醛;个人家装超标污染物主要为总挥发性有机物,甲醛。     

Effect of a high strength chemical industry wastewater on microbial community dynamics and mesophilic methane generation

A high strength chemical industry wastewater was assessed for its impact on anaerobic microbial com- munity dynamics and consequently mesophilic methane generation. Cumulative methane production was 251 mL/g total chemical oxygen demand removed at standard temperature and pressure at the end of 30 days experimental period with a highest recorded methane percentage of 80.6% of total biogas volume. Volatile fatty acids （VFAs） analysis revealed that acetic acid was the major intermediate VFAs produced with propionic acid accumulating over the experimental period. Quantitative analysis of microbial communities in the test and control groups with quantitative real time polymerase chain reaction highlighted that in the test group, Eubacteria （96.3%） was dominant in comparison with methanogens （3.7%）. The latter were dominated by Methanomicrobiales and Methanobacteriales while in test groups increased over the experimental period, reaching a maximum on day 30. Denaturing gradient gel electrophoresis profile was performed, targeting the 16S rRNA gene of Eubacteria and Archaea, with the DNA samples extracted at 3 different time points from the test groups. A phylogenetic tree was constructed for the sequences using the neighborhood joining method. The analysis revealed that the presence of organisms resembling Syntrophomonadaceae could have contributed to increased production of acetic and propionic acid intermediates while decrease of organisms resembling Pelotomaculum sp. could have most likely contributed to accumulation of propionic acid. This study suggested that the degradation of organic components within the high strength industrial wastewater is closely linked with the activity of certain niche microbial communities within eubacteria and methanogens.     

新乡市工业“三废”污染及治理措施

以新乡市2006—2012年工业"三废"排放监测数据为依据,通过对城市废水、废气及工业固体废弃物排放情况的分析,找出主要污染特征并提出相关治理对策。     

循环经济工业园区规划环评研究

概括了循环经济工业园区规划环境影响评价的框架思路。归纳总结了规划环评的主要内容,并以山西省长治市襄垣富阳循环经济工业园区为例,对规划环评指标体系的构建进行探讨。     

工业锅炉PM2.5产排特性试验研究

采用荷电低压颗粒撞击器(ELPI)对哈尔滨市两台燃用烟煤的工业锅炉PM2.5排放特性进行了研究.研究结果表明:PM2.5的粒数和质量浓度分布曲线均呈现单峰分布,前者峰值出现在0.12~0.2μm粒径范围内,这部分粒子主要是由无机物气化-凝结形成的亚微米颗粒物和挥发分未完全燃烧形成的炭黑粒子,而后者峰值出现在0.32μm处,粒子主要是由炭黑粒子形成的亚微米颗粒和残灰粒子形成的超微米颗粒.同时发现,旋风除尘和湿法除尘对PM2.5各级颗粒均有一定的去除效果,采用多管旋风和冲击水浴除尘器联合除尘效率比单种水膜除尘器除尘效率高;湿法脱硫系统对PM2.5的脱除也有明显的作用,由于除雾器不能全部去除小雾滴,这些雾滴中固体颗粒被干燥和水溶性物质结晶析出,PM0.32颗粒物粒数浓度有所增加,而PM0.32~2.5的颗粒物粒数浓度有所减少,但总质量浓度降低.     

电化学法处理工业废水的现状与发展研究

随着工业的快速发展,如何对工业废水进行高效处理是我们需要解决的问题。电化学方法反应装置简单,反应效率高,不会产生二次污染。对中国工业废水目前常用的电化学处理技术的进展和应用进行了综述,包括电化学氧化、电化学还原、电絮凝、电渗析等内容,对国内外的研究成果的总结可知,电化学法对工业废水的处理效率较高,有一定的应用前景。同时对电化学法将来的重点研究方向提出了展望。