准好氧矿化垃圾床处理渗滤液的试验研究

在实验室对渗滤液进行一次过流处理,通过比较连续进水与间歇进水条件下准好氧矿化垃圾床处理渗滤液的效果,探讨准好氧矿化垃圾床处理能力提高的可能性。试验结果表明,在水力负荷为5L/d时,连续进水条件下准好氧矿化垃圾反应床对渗滤液COD、NH3-N的去除率分别为85.68%、86.51%,较间歇进水分别高5.92%、5.78%。因而采用连续进水可提高准好氧矿化垃圾床的处理能力。     

An analytical model for the interpretation of pulse injection experiments performed for testing the spatial variability of clay formations

This paper presents an analytical model to describe pulse injection experiments. This model solves the advection-diffusion equation while taking into account back diffusion from the clay core to the inlet and from the outlet to the clay core. In most analytical models, back diffusion is neglected. For sufficiently high Péclet numbers, this is a good approximation. However, in experiments where the Péclet number is low, back diffusion is important and must be taken into account. An additional advantage of the present model is that both concentration and flux are conserved at the inlet and at the outlet of the clay core. This model is used to fit pulse injection experiments with iodide and tritiated water (HTO) in clay cores. The (new) model is required for fitting the experimental results since in clay layers advection is very slow leading to a low Péclet number. The experiments are performed on clay cores taken from different depths from the Boom Clay and the Ypres Clay layer under the site of the nuclear power plant of Doel (Belgium). The quality of all fits is excellent and the obtained parameter values are coherent. For HTO, the fitted value for the diffusion accessible porosity is consistent with measurements of the water content in Ypres Clay cores. In both types of clays, the apparent diffusion coefficient at zero flow is between 10(-10) and 2 x 10(-10) m(2)/s for iodide and between 2 x 10(-10) and 3 x 10(-10) m(2)/s for HTO. The dispersion length is in the order of 10(-3) m. The average value for the diffusion accessible porosity is between 0.35 and 0.4 for HTO and between 0.2 and 0.25 for iodide.     

孔雀绿体系流动注射光度法测定水中正磷酸盐

建立了流动注射-孔雀绿-磷钼杂多酸分光光度法测定水中痕量正磷酸盐的方法.优化了试验条件,方法在0 mg/L～0.3 00mg/L线性良好,检出限为0.002 mg/L,准确度和精密度均符合要求,而且快速简便,适用于地表水、地下水、饮用水等清洁水体中正磷酸盐的测定.     

GC-C-IRMS测定污染场地土壤中苯系物单体碳同位素比值

选取苯系物中的代表性组分苯、甲苯和二甲苯等化合物,通过热脱附、气相色谱质谱条件的优化及方法学考察,建立了热脱附进样-气相色谱-同位素比值质谱(GC-C-IRMS)测定苯系物单体碳同位素比值的方法。结果表明,单体化合物进样量在0.3μg以上均能满足测定要求;与直接进样方式相比,热脱附进样对单体碳同位素比值测定无分馏影响;标准溶液和苯系物土壤样品测定结果的RSD分别为1.0%~1.7%和0.3%~2.6%。     

罐采样-加压进样-气相色谱法测定环境空气中非甲烷总烃研究

建立了罐采样-气相色谱法测定环境空气中非甲烷总烃的分析方法。用罐采集环境空气样品至微负压状态，经除烃空气加压后，用气相色谱仪进行分析。并对氮气空白、除烃空气、样品保存期限、不同压力进样、不同正压压力进样、不同湿度、不同种类物质对总烃的贡献等进行了研究，在最佳实验条件下，非甲烷总烃的方法检出限为0.04μmol/mol,标准曲线相关系数均大于0.999 5,低、中、高浓度水平测定结果相对标准偏差均小于2.0%,低、中、高浓度的质控样品相对误差均小于2.0%。利用该方法对环境空气样品进行了检测分析，该法完全满足国家标准质控的要求，适用于环境空气和污染源无组织废气中非甲烷总烃的准确测定。     

模拟在役井注减氧空气对1Cr-L80井筒管材防腐研究

目的 在充分调研陆上及渤海周边相似油气田注气开发井筒腐蚀情况的基础上,明确注减氧空气开发井对井筒全寿命周期管材腐蚀速率大小.方法 系统性开展注气井不同含氧量条件下的动态腐蚀实验研究,并对生产井动态腐蚀进行评价,深入分析减氧空气对油井管腐蚀行为,分类分层次分析归纳注减氧空气工况管柱腐蚀特性、腐蚀速率影响因素以及管柱腐蚀风...