Response of Organic and Inorganic Carbon and Nitrogen to Long-Term Grazing of the Shortgrass Steppe

We investigated the influence of long-term (56 years) grazing on organic and inorganic carbon (C) and nitrogen (N) contents of the plant–soil system (to 90 cm depth) in shortgrass steppe of northeastern Colorado. Grazing treatments included continuous season-long (May–October) grazing by yearling heifers at heavy (60–75% utilization) and light (20–35% utilization) stocking rates, and nongrazed exclosures. The heavy stocking rate resulted in a plant community that was dominated (75% of biomass production) by the C₄ grass blue grama (Bouteloua gracilis), whereas excluding livestock grazing increased the production of C₃ grasses and prickly pear cactus (Opuntia polycantha). Soil organic C (SOC) and organic N were not significantly different between the light grazing and nongrazed treatments, whereas the heavy grazing treatment was 7.5 Mg ha^–1 higher in SOC than the nongrazed treatment. Lower ratios of net mineralized N to total organic N in both grazed compared to nongrazed treatments suggest that long-term grazing decreased the readily mineralizable fraction of soil organic matter. Heavy grazing affected soil inorganic C (SIC) more than the SOC. The heavy grazing treatment was 23.8 Mg ha^–1 higher in total soil C (0–90 cm) than the nongrazed treatment, with 68% (16.3 Mg ha^–1) attributable to higher SIC, and 32% (7.5 Mg ha^–1) to higher SOC. These results emphasize the importance in semiarid and arid ecosystems of including inorganic C in assessments of the mass and distribution of plant–soil C and in evaluations of the impacts of grazing management on C sequestration.     

基于优势隐含周期分析的气象灾害预报

建立了优势因子和优势隐含周期的概念,并提出了多因子逐步回归周期分析的新方法。该方法既能增长预报期,又能充分利用物理因子的重要信息,同时在计算过程中还能挑选出起显著作用的优势因子和优势隐含周期,对预报气象要素的变化趋势效果较好,有一定的实用价值,是气象灾害预报的一条比较有效的途径。     

天津市夏季PM10浓度及组成元素垂直分布特征

通过天津市气象局大气边界层观测站高255 m的气象铁塔,获得了10m、40m、120m和220 m 4个高度共80个PM10样品,分析了PM10的日均质量浓度及其元素的垂直分布特征.结果表明,4个高度处PM10质量浓度时序变化基本一致;PM10质量浓度及其组成元素总量随高度增加递减;10 m、40m和120m3个高度处的PM10质量浓度时间序列分布的相关性较好,组分分歧系数较小,而220 m处的PM10质量浓度时间序列分布与其他3个高度处的相关性较差,组分分歧系数较大.样品中元素质量浓度由高到低依次是Si、Al、Ca、Fe、Na、Mg、K、Zn、Ti、Cu、Mn、Pb、Cr、Ni、Co、V、As、Cd和Hg.其中,Si、Al、Na、K质量分数随高度变化不大;Ca、Fe、Mg质量分数随高度增加递减明显;Zn、Cu、Mn、Pb、Cr在10m、40m和120 m3个高度处质量分数接近,而在220m处明显降低;Ti元素在4个高度处的质量浓度接近,质量分数总体上随高度增加递增;Ni、Co、V、As、Cd、Hg质量分数随高度的变化不同,其中与燃煤有密切关系的Hg在120 m处质量分数明显高于其他高度处,而在220m处最低.Al、Fe、Na、K等元素相对富集因子小于或接近1,其质量浓度与PM10质量浓度时序分布的相关性较好,其中Al、Na相关系数随高度增加显著递减;Zn,Cu、Pb、Cr、As、Ni的相对富集因子显著大于1,其质量浓度与PM10质量浓度时序分布的相关性较差,相关系数随高度增加变化不大.     

Development of a Computationally Efficient Full Human Body Finite Element Model

Introduction: A simplified and computationally efficient human body finite element model is presented. The model complements the Global Human Body Models Consortium (GHBMC) detailed 50th percentile occupant (M50-O) by providing kinematic and kinetic data with a significantly reduced run time using the same body habitus.

Methods: The simplified occupant model (M50-OS) was developed using the same source geometry as the M50-O. Though some meshed components were preserved, the total element count was reduced by remeshing, homogenizing, or in some cases omitting structures that are explicitly contained in the M50-O. Bones are included as rigid bodies, with the exception of the ribs, which are deformable but were remeshed to a coarser element density than the M50-O. Material models for all deformable components were drawn from the biomechanics literature. Kinematic joints were implemented at major articulations (shoulder, elbow, wrist, hip, knee, and ankle) with moment vs. angle relationships from the literature included for the knee and ankle. The brain of the detailed model was inserted within the skull of the simplified model, and kinematics and strain patterns are compared.

Results: The M50-OS model has 11 contacts and 354,000 elements; in contrast, the M50-O model has 447 contacts and 2.2 million elements. The model can be repositioned without requiring simulation. Thirteen validation and robustness simulations were completed. This included denuded rib compression at 7 discrete sites, 5 rigid body impacts, and one sled simulation. Denuded tests showed a good match to the experimental data of force vs. deflection slopes. The frontal rigid chest impact simulation produced a peak force and deflection within the corridor of 4.63 kN and 31.2%, respectively. Similar results vs. experimental data (peak forces of 5.19 and 8.71 kN) were found for an abdominal bar impact and lateral sled test, respectively. A lateral plate impact at 12 m/s exhibited a peak of roughly 20 kN (due to stiff foam used around the shoulder) but a more biofidelic response immediately afterward, plateauing at 9 kN at 12 ms. Results from a frontal sled simulation showed that reaction forces and kinematic trends matched experimental results well. The robustness test demonstrated that peak femur loads were nearly identical to the M50-O model. Use of the detailed model brain within the simplified model demonstrated a paradigm for using the M50-OS to leverage aspects of the M50-O. Strain patterns for the 2 models showed consistent patterns but greater strains in the detailed model, with deviations thought to be the result of slightly different kinematics between models. The M50-OS with the deformable skull and brain exhibited a run time 4.75 faster than the M50-O on the same hardware.

Conclusions: The simplified GHBMC model is intended to complement rather than replace the detailed M50-O model. It exhibited, on average, a 35-fold reduction in run time for a set of rigid impacts. The model can be used in a modular fashion with the M50-O and more broadly can be used as a platform for parametric studies or studies focused on specific body regions.     

Effect of Aging on Brain Injury Prediction in Rotational Head Trauma—A Parameter Study with a Rat Finite Element Model

Objective: The aim of this study was to investigate the possible effects of age-related intracranial changes on the potential outcome of diffuse axonal injuries and acute subdural hematoma under rotational head loading.

Methods: A simulation-based parametric study was conducted using an updated and validated finite element model of a rat head. The validation included a comparison of predicted brain cortex sliding with respect to the skull. Further, model material properties were modified to account for aging; predicted tissue strains were compared with experimental data in which groups of rats in 2 different lifecycle stages, young adult and mature adult, were subjected to rotational trauma. For the parameter study, 2 age-dependent factors—brain volume and region-specific brain material properties—were implemented into the model. The models young adult and old age were subjected to several injurious and subinjurious sagittal plane rotational acceleration levels.

Results: Sequential analysis of the simulated trauma progression indicates that an increase in acute subdural hematoma injury risk indicator occurs at an early stage of the trauma, whereas an increase in diffuse axonal injury risk indicators occurs at a later stage. Tissue stiffening from young adult to mature adult rats produced an increase in strain-based thresholds accompanied by a wider spread of strain distribution toward the rear part of the brain, consistent with rotational trauma experiments with young adult and mature adult rats. Young adult to old age brain tissue softening and brain atrophy resulted in an increase in diffuse axonal injuries and acute subdural hematoma injury risk indicators, respectively.

Conclusions: The findings presented in this study suggest that age-specific injury thresholds should be developed to enable the development of superior restraint systems for the elderly. The findings also motivate other further studies on age-dependency of head trauma.     

三维点云基础上排土场垮塌影响范围研究

高台阶排土场下游常分布有居民区、厂房等,一旦垮塌,后果严重,因此完善的防治与应急准备工作十分关键,而排土场垮塌影响范围的预测是这些工作的重要前提依据。为提升高台阶排土场垮塌影响范围的预测准确性,需要获取准确的地形边界基础数据。通过利用三维激光扫描仪对新建排土场及其下游地形精细扫描,对获取的三维点云数据去噪、拼接、建模等处理,生成精度更高的数字高程模型与三维实体模型。在此基础上,结合新建高台阶排土场地质勘查与设计资料,建立颗粒离散元数值模型,利用PFC3D计算高台阶排土场垮塌影响范围,并与经验公式法计算结果对比分析,结果表明排土场颗粒离散元数值模型精度符合要求,可快速、准确地计算影响范围,从而为相关部门提供科学决策依据。     

Application of CFD on the sensitivity analyses of some parameters of the modified Hartmann tube

The aim of this work is to determine the influence of operating parameters such as the dispersion pressure, the ignition delay and height on the dust flammability. A Computational Fluid Dynamics (CFD) simulation, based on an Euler–Lagrange approach, was developed with Ansys Fluent™ and validated experimentally. Such analysis will facilitate the choice of the most conservative conditions for a flammability test. This paper is focused on a case study performed on wheat starch with the modified Hartmann tube. The dispersion process of the powder was studied with granulometric analyses performed in situ and high speed videos. Tests were performed with injections at gas pressure ranging from 3 to 6 bars and the evolution of the particle size distribution (PSD) was recorded at different ignition heights (5, 10 and 15 cm over the dispersion nozzle). The observations highlighted the presence of agglomeration/deagglomeration processes and dust segregation. Besides, a CFD simulation analysis was aimed at evaluating the impact of a set of parameters on the PSD and the local turbulence, which are closely linked to some flammability parameters. For this computational analysis, the CFD simulation was coupled with a collision treatment based on a Discrete Element Method (DEM) in order to consider the cohesive behavior of the combustible dust. Thus the results suggest performing the injection of the gases at approximately 5 bars for the flammability tests of wheat starch in order to obtain the finest PSD at a given ignition height. It is also shown that the finest PSD are obtained at 5 cm over the dispersion nozzle. However, the local instabilities and turbulence levels are so high during the first stages of the dispersion that the flame growth can be disturbed for short ignition delays. Moreover, the stabilization of the bulk of the dust cloud requires longer periods of time when the ignition sources are located at 15 cm. As a result, the recommended height to perform a flammability test is 10 cm in this case. Finally, this study proposes some tools that might improve the procedure of dust flammability testing.     

水环境中不同形态氮对甲芬那酸光降解影响机制的研究

研究了紫外光照射下水环境中不同形态的无机氮(NO-3、NO-2和NH+4)对甲芬那酸(MEF)光解的影响.NO-3与NO-2均促进MEF的光解,NH+4对MEF的光解基本无影响;在NO-3、NO-2存在下添加适量异丙醇,显著抑制MEF的降解,实验表明NO-3、NO-2在光照下产生了·OH并参与对MEF的氧化降解.同时模拟研究了水体处于不同p E值下,水中存在的不同形态的无机氮对MEF光解的复合影响,其对MEF光解促进作用不是简单的叠加关系,增大p E值,MEF的光解速率先增大后减小.当NO-2和NH+4共存时,对MEF的光解主要表现为NO-2的影响;当NO-2和NO-3共存时,两者对MEF的光解存在拮抗作用.     

Growth and alkaline phosphatase activity of Chattonella marina and Heterosigma akashiwo in response to phosphorus limitation

The growth and alkaline phosphatase activity (APA) of two raphidophyceae species Chattonella marina and Heterosigma akashiwo were investigated in response to P-limitation and subsequent addition of dissolved inorganic phosphorus (DIP, NaH₂PO₄) and two dissolved organic phosphorus (DOP) compounds: guanosine 5-monophosphate (GMP) and triethyl phosphate (TEP). APAlevels increased greatly after P-starvation as the decrease of the cellular phosphorus quotes (Q_p). C. marina responded to P-limitation quickly and strongly, with 10-fold increase in APA within 24 hr after P-starvation. The larger difference between maximal and minimal Q_p values in C. marina indicated its high capacity in P storage. APA of H. akashiwo wasmaximally enlarged about 2.5 times at 48 hr of P-starvation. After the addition of nutrients, cell numbers of C. marina increased in all treatments including the P-free culture, demonstrating the higher endurance of C. marina to P-limitation. However, those of H. akashiwo increased only in DIP and GMP cultures. APA increased only after the addition of the monophosphate ester GMP. The results suggest that quick responses of C. marina to P-limitation, high capacity in P storage as well as endurance for P-depletion provide this species an ecological advantage in phytoplankton community competition under DIP-limited conditions.