物化-生化组合工艺处理化纤纺织品染色废水

采用物化 生化组合工艺处理化纤纺织品染色废水 ,结果表明 ,当进水COD为 2 50 0～ 550 0mg/L、色度为 6 0 0倍 ,BOD5 为 6 0 0～ 1 40 0mg/L时 ,COD去除率和BOD5 去除率均在 95%以上 ,脱色率可达 93% ,出水达到了排放标准。该工艺适合各种规模化纤纺织品染色厂的废水处理。     

络合吸收结合生物转化去除氮氧化物技术

介绍了络合吸收结合生物转化处理NOx 技术的基本原理和目前的研究进展情况 ,并分析了该技术处理氮氧化物存在的问题和未来发展方向     

城市污水石灰法深度处理工艺中有毒物质的变化规律

分别采用7-乙氧基异酚恶唑酮．脱乙基酶（EROD）活性测定法，重组人激素受体基因的酵母测试和Q67发光菌试验方法，对北京市某生活污水处理厂的进水、二沉出水以及经过石灰法深度处理后的出水中的类二恶英物质、类雌激素物质和急性毒性物质进行了分析。进水中的三类生物毒性效应物质中的急性毒性物质，可通过活性污泥法基本去除，而对类雌激素物质和类二恶英物质的去除率分别为76％和52％。经过石灰沉淀法的深度处理后，可使上述两类物质的总去除率达到95％和68％。出水中的雌激素当量水平与欧洲国家污水处理厂出水水平相当，而类二恶英物质的总浓度低于美国EPA饮用水中二恶英的最大允许浓度。展示了生物毒性测试方法在排水生态风险和工艺评价方面的应用潜力。     

一体化间歇曝气完全混合活性污泥法

一体化间歇曝气完全混合活性污泥法处理装置采取特殊的沉淀区构造,改变了活性污泥的循环流动方式,通过间歇曝气,反应区交替处于好氧/缺氧状态,达到了有机物高效去除、高效硝化反硝化及控制污泥膨胀的效果.该方法具有出水水质好、运行稳定、能耗低、流程简洁和操作管理方便的特点,是一种很有发展潜力的一体化中小型生活污水、城市污水处理系统.     

Mercury pollution and macrophage centres in pike (Esox lucius) tissues

From June 1993 to October 1994, studies have been carried out on the effects of mercury in the Oder River and pike tissue contamination (muscle, kidney, liver). The mean mercury contents in the sediment range from 0.03 to 1.1 mg/kg dry weight. In the pike muscle, between 0.22 and 0.85 mg/kg, on a wet weight basis, were found. The measured mercury concentrations were analysed in relation to the number of macrophage centres of the liver, spleen and kidney of the pike. Positive correlations between mercury and MC response (0.54 ≤ r ≤ 0.79, p < 0.05) were found in all of these organs. The suitability of the macrophage-centre-response as a possible bioindicator for mercury pollution is discussed in the literature. In our study, the response of MCs was found to be suitable as a biomarker for the impairment of fish health.     

一体化间歇曝气完全混合活性污泥法

一体化间歇曝气完全混合活性污泥法处理装置采取特殊的沉淀区构造,改变了活性污泥的循环流动方式,通过间歇曝气,反应区交替处于好氧/缺氧状态,达到了有机物高效去除、高效硝化反硝化及控制污泥膨胀的效果.该方法具有出水水质好、运行稳定、能耗低、流程简洁和操作管理方便的特点,是一种很有发展潜力的一体化中小型生活污水、城市污水处理系统.     

Computational investigation of the effects of knee airbag design on the interaction with occupant lower extremity in frontal and oblique impacts

Objective: The lower extremity of the occupant represents the most frequently injured body region in motor vehicle crashes. Knee airbags (KABs) have been implemented as a potential countermeasure to reduce lower extremity injuries. Despite the increasing prevalence of KABs in vehicles, the biomechanical interaction of the human lower extremity with the KAB has not been well characterized. This study uses computational models of the human body and KABs to explore how KAB design may influence the impact response of the occupant's lower extremities.

Methods: The analysis was conducted using a 50th percentile male occupant human body model with deployed KABs in a simplified vehicle interior. The 2 common KAB design types, bottom-deploy KAB (BKAB) and rear-deploy KAB (RKAB), were both included. A state-of-the-art airbag modeling technique, the corpuscular particle method, was adopted to represent the deployment dynamics of the unfolding airbags. Validation of the environment model was performed based on previously reported test results. The kinematic responses of the occupant lower extremities were compared under both KAB designs, 2 seating configurations (in-position and out-of-position), and 3 loading conditions (static, frontal, and oblique impacts). A linear statistical model was used to assess factor significance considering the impact responses of the occupant lower extremities.

Results: The presence of a KAB had a significant influence on the lower extremity kinematics compared to no KAB (P <.05) by providing early restraint and distributing contact force on the legs during airbag deployment. For in-position occupants, the KAB generally tended to decrease tibia loadings. The RKAB led to greater lateral motion of the legs compared to the BKAB, resulting in higher lateral displacement at the knee joint and abduction angle change (51.2 ± 21.7 mm and 15° ± 6.0°) over the dynamic loading conditions. Change in the seating position led to a significant difference in occupant kinematic and kinetic parameters (P <.05). For the out-of-position (forward-seated) occupant, the earlier contact between the lower extremity and the deploying KAB resulted in 28.4° ± 5.8° greater abduction, regardless of crash scenarios. Both KAB types reduced the axial force in the femur relative to no KAB. Overall, the out-of-position occupant sustained a raised axial force and bending moment of the tibia by 0.8 ± 0.2 kN and 21.1 ± 8.7 Nm regardless of restraint use.

Conclusions: The current study provided a preliminary computational examination on KAB designs based on a limited set of configurations in an idealized vehicle interior. Results suggested that the BKAB tended to provide more coverage and less leg abduction compared to the RKAB in oblique impact and/or the selected out-of-position scenario. An out-of-position occupant was associated with larger abduction and lower extremity loads over all occupant configurations. Further investigations are recommended to obtain a full understanding of the KAB performance in a more realistic vehicle environment.     

荣钢节水减排集成技术研究与实践

针对钢铁企业耗水量大、供水资源匮乏等问题,以荣钢集团为研究实体,调查其用水分布与工序,进行水量平衡测试及基础数据的统计,在分析荣钢水资源利用状况基础上,优化水资源配置,研究钢铁行业节水减排集成技术与实施措施,通过一水多用、串级使用、加强节水控污、建立多水源处理再生系统等方法,节约了水资源,提高了水资源的利用率,使企业节水减排取得较好的成效。     

我国灾害信息传播的研究现状与展望

近年来灾害事件频发,有关灾害信息传播的研究成为传播学的一个热点研究方向,目前我国灾害信息传播的研究角度众多,取得了较为丰硕的成果,但大多还只停留在个案研究层面,系统研究有待加强。本文在分析现状的基础上,提出了整合传播是我国灾害信息传播研究的新方向,并可分出传播渠道整合、传播内容整合和传媒自身整合等众多研究分支。     

萃取-反萃法综合回收磷矿浮选尾矿中磷和镁

针对某磷矿浮选尾矿的资源特点,将其作为高镁低品位磷矿进行处理,用萃取-反萃法分离酸浸液中的镁和磷。选择正丁醇作为萃取剂,在磷酸浓度为30%、萃取相比为1:1,温度为常温,萃取时间为5min的均衡搅拌条件下,五氧化二磷萃取率可达68%以上;用水作为反萃剂,在其加入量为反萃前有机相体积的30%,反萃时间为3min,常温条件下进行反萃,反萃率可达90%以上。该研究为综合回收磷矿浮选尾矿提供了基础性资料,