乳化炸药密度在线检测技术

简述了常见密度在线检测方法,提出了一种采用数字称重技术间接在线测量炸药密度的新方法,建立了乳化炸药密度数字在线检测与控制系统,包括系统硬件电路的设计、硬件和电气线路的安装,以及软件程序连接和调试.研究表明,样品质量与检测系统的数字输出存在良好的线性关系,测量精度满足要求.因此,该系统可实现乳化炸药密度的在线实时测定,同时还可通过PLC实现敏化效果的自动反馈与调控,从而保证乳化炸药的敏化效果和产品质量.     

Identification, analysis and dissemination of information on near misses: A case study in the construction industry

Near misses are well-known for providing a major source of useful information for safety management. They are more frequent events than accidents and their causes may potentially result in an accident under slightly different circumstances. Despite the importance of this type of feedback, there is little knowledge on the characteristics of near misses, and on the use of this information in safety management. This article proposes guidelines for identifying, analyzing and disseminating information on near misses in construction sites. In particular, it is proposed that near misses be analyzed based on four categories: (a) whether or not it was possible to track down the event; (b) the nature of each event, in terms of its physical features (e.g. falling objects); (c) whether they provided positive or negative feedback for the safety management system; and (d) risk, based on the probability and severity associated with each event. The guidelines were devised and tested while a safety management system was being developed in a healthcare building project. The monitoring of near misses was part of a safety performance measurement system. Among the main results, a dramatic increase in both the number and quality of reports stands out after the workforce was systematically encouraged to report. While in the first 4 months of the study – when the workforce was not encouraged to report – there were just 12 reports, during the subsequent 4 months – when the workforce was so encouraged – there were 110 reports, all of them being analyzed based on the four analytical categories proposed.     

甘肃省农业高质量发展水平测度及制约因子研究

结合农业高质量发展的特征,构建农业高质量发展评价指标体系,采用熵值法、障碍因子诊断模型对甘肃省2009—2018年农业高质量发展水平和制约因素进行分析。结果发现:①2009—2018年,甘肃省农业高质量发展综合水平整体呈增长态势,但农业发展质量不高。②农业绿色发展和农业科技创新是甘肃省农业高质量发展的主要短板。③人力资本和生态环境保护是制约甘肃省农业高质量发展的主要因素。基于研究结果,提出强化政府职能、培育和引进高质量农业人才、贯彻新发展理念、构建生态补偿机制等加快甘肃省农业高质量发展的政策建议。     

短程硝化反硝化除磷颗粒污泥的同步驯化

本实验对3组同规格SBR反应器分别采用分阶段法（A/O-A/O/A）异步驯化、连续曝气A/OA同步驯化和间歇曝气A/O/A同步驯化的方式运行.以人工配水为进水基质,接种絮状污泥,通过水力选择压颗粒化,探讨了不同运行方式下短程硝化反硝化颗粒污泥的驯化及脱氮除磷特性.结果表明,在较短曝气时长（140 min）联合较低曝气强度［3.5 L·（h·L）^-1］下,间歇曝气A/O/A同步驯化最具优势,后期稳定运行期间碳、氮、磷的平均去除率分别为90.74%、91.15%和95.66%,可实现同步去除.粒径为895μm,颗粒虽小但均匀致密,f值（MLVSS/MLSS）平稳保持在0.8~0.85,有较高的生物量,这是由于间歇曝气下好/缺氧的交替运行,使得缺氧异养菌作为颗粒的核心,有利于颗粒污泥结构的稳定.批次实验结果表明,间歇曝气A/O/A同步驯化下比氨氧化速率为3.38 mg·（g·h）^-1,能利用NO₂^-为电子受体的反硝化聚磷菌（DPAOs）占比达65.46%,更有利于氨氧化菌（AOB）和NO₂^-型DPAOs的同步驯化及富集,保证稳定的处理效果.     

铁碳微电解及沸石组合人工湿地的废水处理效果

铁碳微电解填料和沸石由于对废水中污染物具有良好的处理效果,因而被作为基质逐渐运用于人工湿地中.本研究构建了铁碳微电解填料+砾石（湿地A）、铁碳微电解填料+沸石（湿地B）、沸石（湿地C）以及砾石（湿地D）为基质的4组人工湿地,并利用间歇曝气对湿地系统进行增氧,探究不同填料对人工湿地废水处理效果的影响.结果表明,与湿地D相比,铁碳微电解填料显著提高了湿地出水的溶解氧含量（DO）（P<0.05）和pH（P<0.05）;4组人工湿地对有机物的去除率均达到95%以上,且各组间不存在显著性差异（P>0.05）;对TN而言,湿地A、B和C的平均去除率分别比湿地D提高了7.94%（P<0.05）、9.29%（P<0.05）和3.63%（P<0.05）,铁碳微电解填料和沸石对提升人工湿地TN去除效果的贡献率分别为73.55%和26.45%;各组湿地对NH₄⁺的平均去除率为67.93%~76.90%,与湿地D相比,其它3组湿地均明显改善了NH₄⁺的去除效果（P<0.05）;铁碳微电解填料对湿地NO₃^-的去除效果极佳,去除率高达99%以上,显著高于不添加铁碳微电解的人工湿地系统（P<0.05）.综合对碳氮污染物的处理效果来看,湿地B在间歇曝气的条件下对人工湿地中污染物去除效率最高.     

多参数指示南极普里兹湾浮游植物的时空变化

以南极普里兹湾沉积物为研究对象,运用气相色谱技术,研究了生物标志物菜子甾醇、甲藻甾醇、长链烯酮对应指示的硅藻、甲藻、颗石藻等浮游植物的生产量和种群结构的历史变化,结合2001—2011年实测和遥感水体ρ(Chla)(Chla为叶绿素a)及SST(海水表层温度)数据,探讨了该湾浮游植物生产量时空变化特征及其影响因素. 结果表明:过去100多年间南极普里兹湾浮游植物总生产量(212.04~759.10 ng/g)〔以w(菜子甾醇)+w(甲藻甾醇)+w(长链烯酮)计〕和w(硅藻)所占比例(62.28%~87.13%)〔以w(菜子甾醇)所占比例计〕均呈上升趋势,而w(甲藻)所占比例(10.09%~27.98%)〔以w(甲藻甾醇)所占比例计〕和w(颗石藻)所占比例(1.97%~9.74%)〔以w(长链烯酮)所占比例计〕则呈下降趋势. 全球变暖背景下浮游植物种群变动通过改变南大洋对CO₂的吸收进而影响全球碳循环. 水体ρ(Chla)与沉积生物标志物指示的浮游植物总生产量均具有湾内高、湾外低的空间分布特征. 湾内ρ(Chla)与SST的年际变化趋势相似,二者以2002—2003年和2009—2010年相对较高,SST分别为-0.30和0.01 ℃,ρ(Chla)分别为1.69和2.31 mg/m3;以2001—2002年和2010—2011年相对较低,SST分别为-1.19和-0.95 ℃,ρ(Chla)分别为1.08和0.79 mg/m3,表明该湾SST变化可较明显地影响浮游植物的生长.      

A guide for assessing control room operator performance using speed and accuracy,perceived workload,situation awareness,and eye tracking

In the petrochemical industry, control room operators must address safety-critical alarms and other tasks using complex interfaces. This study developed a guide for assessing human performance using standard human factors measurement tools, and tested the sensitivity of those tools with two interface designs (i.e., gray and black) at three levels of workload (i.e., easy, medium, and difficult). The guide measures human performance through speed and accuracy, perceived workload using two standard instruments (i.e., NASA Task Load Index (NASA-TLX) and Subjective Workload Assessment Technique (SWAT)), situation awareness through the Situation Awareness Global Assessment Technique (SAGAT), and gaze through eye tracking coordinates. Twelve engineering student participants completed one simulation session at each of the three workload levels using one of two interface designs. Workload was manipulated through the number of simulated events (failures) in each session. Overall, the speed and accuracy measures, workload ratings, and eye tracking showed sensitivity to differences in workload level, and situation awareness showed sensitivity to the interaction between workload level and interface type. None of the tools were sensitive to interface type alone. Accuracy was highest under easy workload. Time per failure decreased at higher workload levels. Perceived workload ratings from the SWAT increased as workload increased, but workload ratings from the NASA-TLX were not different across workload levels. When workload increased, situation awareness remained steady for the gray interface but decreased sharply for the black interface, illustrating an interaction effect. Finally, the percentage of time spent looking at different areas of the screen during steady-state periods differed among workload levels. The tools in this guide can be used in the petrochemical industry to make design decisions for control room interfaces when workload levels are a concern.     

Performance evaluation of integrated resilience engineering factors by data envelopment analysis: The case of a petrochemical plant

Petrochemical units are potentially prone to incidents that have catastrophic consequences such as explosion, leakage of toxic materials, and the stoppage of the production process. Resilience engineering (RE) is a new method that can control incidents and limit their consequences. It includes top-level commitment, reporting culture, learning, awareness, preparedness, and flexibility. However, this study introduces a new concept of RE (referred to as integrated RE or IRE) which includes the above factors in addition to self-organization, teamwork, redundancy and fault-tolerant. This study evaluates performance of IRE in a petrochemical plant through considering the obtained data from questionnaires and data envelopment analysis (DEA) approach. Moreover, the performance of RE and the new IRE are compared and discussed. The results show that although there is a strong direct correlation between the DEA results in two frameworks, the mean scores of efficiency in IRE is slightly higher than RE. This is the first study that introduces an integrated approach for RE. In addition, this study is amongst the first ones that examine the behavior of resilience engineering by DEA. Moreover, the superiority of IRE is shown through robust statistical analysis.     

用高精度磁测圈定煤田自燃区的应用效果

煤田自燃在中国北方非常普遍,每年都给中国的煤炭资源以及生态环境造成重大损失。为控制和监测煤田自燃,须对其自燃边界进行圈定。煤层自燃后产生“热剩磁”,基于这一理论,运用高精度磁测圈定了西北某煤田自燃区的边界范围,并建立了“倾斜磁化有限延伸的板状体”模型进行正演。由钻孔验证的结果来看,高精度磁测圈定煤田自燃区边界范围的应用效果良好。     

高温碱间歇式处理对互花米草厌氧发酵特性的影响

以互花米草为原料,采用中温(35±1)℃批式发酵的方式,考察了NaOH高温碱间歇式处理对互花米草厌氧消化过程的影响.结果表明,互花米草一次发酵至产气停止,单位TS产气量为263mL/g,发酵过程中出现酸化现象, pH值最低为5.17.二次发酵原料为一次发酵后的固体残余物,主要组分为可分解有机物以及一些难分解有机物,过程中未出现酸化现象, pH值经短暂下降后很快稳定在7.5左右,累积产气量在一次发酵的基础上提高了46%.互花米草单位TS产气量为383mL/g.消化液中有机酸乙酸含量最大,丙酸和丁酸含量相当.