内部营销理论与HSE推广

介绍了内部营销理论的发展历程,分析了内部营销理论在指导HSE推广工作中的可行性与必要性。     

一体化管理体系与HSE管理

介绍了一体化管理体系的特点和框架,阐明了建立一体化管理体系对HSE管理的作用,指出了实施一体化管理体系的注意事项。     

Barriers to the adoption of proactive environmental strategies

This study contributes to the knowledge of the difficulties or barriers found by firms when adopting proactive environmental strategies, providing empirical evidence from 240 Spanish industrial firms. A set of 25 barriers are initially evaluated by the managers of the sample firms and are grouped into four types of difficulties facing firms: external barriers, endemic limitations of the firm, limited environmental motivation and limited preparation of employees and operational inertia. The estimation of a structural equation model leads us to conclude that only the barriers identified as endemic limitations of the firm can be characterized as “effective barriers”, defined as problems preventing firms from progressing toward proactive environmental behavior.     

内循环(IC)反应器运行规律研究

研究采用自制内循环(IC)反应器,以实验室模拟废水为进水,接种城市污水处理厂的剩余污泥,对反应器的启动及运行过程进行研究,在经过污泥驯化、颗粒培养、调整及稳定的不同阶段连续运行.结果表明:启动初期反应器pH过低,产甲烷菌生长受抑制,导致VFA累积,容易酸化.通过改变模拟废水中微量元素的浓度及添加缓冲溶液,酸化的反应器可...     

浅谈实验室内审员与监督员

内审员、监督员是实验室不可缺少的关键岗位人员,他们在很多方面存在不同,二者正常有效工作能够促进管理体系规范有序运作,《实验室资质认定评审准则》对其做了言简意赅的介绍与要求,大部分实验室的内审与监督工作也有了长足的进步,但在一部分实验室存在内审工作质量不高、监督工作有缺陷等问题,个别实验室存在应付评审或监督检查现象。实验室必须加以重视并且积极改正,加强管理,进一步强化管理体系运行的有效性。     

乌鲁木齐市采暖季空气质量变化趋势分析

为了定量评价乌鲁木齐市采暖季空气污染近五年的治理成效,给环境治理决策提供科学依据,运用回归分析方法,对乌鲁木齐市采暖季空气质量的浓度、级别和变化规律进行回归分析。分析结果表明,PM10、SO2、NO2三项污染物的浓度都有所下降,空气质量级别的污染天数呈现明显的月变化规律。乌鲁木齐市采暖季空气的重污染状况有所遏制,但SO2污染凸现,在下一步的治理工作中,加强尘污染治理的同时要加大对SO2的治理力度。     

铁屑/焦炭/H2O2法预处理焦化废水的试验研究

采用铁屑/焦炭/H2O2法对焦化废水进行处理,通过单因素试验法考察了铁炭比、铁炭用量、H2O2用量、废水pH以及反应时间对处理效果的影响,并确定了最适工艺条件。结果表明,铁屑/焦炭/H2O2法与常规的铁屑内电解法相比,可显著提高焦化废水的预处理效果,并缩短反应时间。铁屑/焦炭/H2O2法处理焦化废水的最适条件为:铁炭比为4,铁炭用量为300mg/L铁屑+75mg/L焦炭,H2O2用量为1000mg/L,pH为3,反应时间20min。在此条件下,COD、色度、NH3-N和CN-的去除效率分别可达61.2%、74.0%、56.2%和74.3%,B/C比由处理前的0.189提高到0.387,处理水可生化性良好。铁屑/焦炭/H2O2可作为焦化废水的一种有效的预处理方法。     

Photovoltaic-thermal (PV/t) panel to minimize electrical and air conditioning energy consumption of a typical office in Beirut

A combined photovoltaic–thermal (PV/t) panel is proposed to produce simultaneously electricity and heat from one integrated unit. The unit utilizes effectively the solar energy through achieving higher PV electrical efficiency and using the thermal energy for heating applications. To predict the performance of the PV/t at a given environmental conditions, a transient mathematical model was developed. The model was integrated in a heating application for a typical office space in the city of Beirut to provide the office needs for electricity, heating during winter season, and dehumidification and evaporative cooling during the summer season. To minimize the yearly office energy (electrical and heat) needs, the PV/t panel cooling air flow rate and the dehumidification regeneration temperature were determined for opimal unit operation. Thermal energy savings of up to 85% in winter and 71% in summer were achived compared to conventional systems at a payback period of 8 years for the panels.     

Structure optimization and annual performance analysis of the lens-walled compound parabolic concentrator

The primary lens-walled compound parabolic concentrator (lens-walled CPC) has a significant advantage of a larger half acceptance angle as a static solar concentrator, but it also has a drawback of a low optical efficiency. In order to overcome this drawback, in this article, series of structure parameters were investigated and compared to further improve the optical efficiency within the half acceptance angle combined with the material properties. The average optical efficiencies of the improved lens-walled CPCs could achieve more than 82% within the half acceptance angle of 35?. Experiments were adopted to verify the credibility and validity of the simulation. Moreover, annual performance of the lens-walled CPCs comparison with that of the mirror CPC for Nottingham was analyzed. Results show that the improved lens-walled CPC has a higher optical performance for actual building application.     

Dechlorination of polyvinyl chloride in NaOH/ethylene glycol solution by microwave heating

This study investigated the dehydrochlorination of flexible polyvinyl chloride (PVC) containing 59.2% PVC, 29.7% dioctyl phthalate (DOP), and approximately 12% stabilizers. Flexible PVC was treated with NaOH/ethylene glycol (NaOH/EG) solutions at NaOH concentrations in the range 0.5–4 mol/l and was heated in a microwave heater at a temperature between 100° and 160°C for 0–30 min. All chlorides were completely eliminated by internal heating at 160°C using microwaves for 10 min in a 1 mol/l NaOH/EG solution, and the residue was made up of hydrocarbons. The weight loss rate reached a maximum of 74.7% at a temperature of 160°C. It was discovered that the use of microwaves significantly shortened the reaction time compared to using conventional electric heaters or other external heating systems and also allowed the use of lower concentrations of NaOH. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6