Objective: Pedestrian injuries are a leading cause of child death and may be reduced by training children to cross streets more safely. Such training is most effective when children receive repeated practice at the complex cognitive–perceptual task of judging moving traffic and selecting safe crossing gaps, but there is limited data on how much practice is required for children to reach adult levels of functioning. Using existing data, we examined how children's pedestrian skills changed over the course of 6 pedestrian safety training sessions, each composed of 45 crossings within a virtual pedestrian environment.
Methods: As part of a randomized controlled trial on pedestrian safety training, 59 children ages 7–8 crossed the street within a semi-immersive virtual pedestrian environment 270 times over a 3-week period (6 sessions of 45 crossings each). Feedback was provided after each crossing, and traffic speed and density were advanced as children's skill improved. Postintervention pedestrian behavior was assessed a week later in the virtual environment and compared to adult behavior with identical traffic patterns.
Results: Over the course of training, children entered traffic gaps more quickly and chose tighter gaps to cross within; their crossing efficiency appeared to increase. By the end of training, some aspects of children's pedestrian behavior was comparable to adult behavior but other aspects were not, indicating that the training was worthwhile but insufficient for most children to achieve adult levels of functioning.
Conclusions: Repeated practice in a simulated pedestrian environment helps children learn aspects of safe and efficient pedestrian behavior. Six twice-weekly training sessions of 45 crossings each were insufficient for children to reach adult pedestrian functioning, however, and future research should continue to study the trajectory and quantity of child pedestrian safety training needed for children to become competent pedestrians. 相似文献
Purpose: This study collected and analyzed available testing of motor vehicle seat strength in rearward loading by a body block simulating the torso of an occupant. The data were grouped by single recliner, dual recliner, and all belts to seat (ABTS) seats.
Methods: The strength of seats to rearward loading has been evaluated with body block testing from 1964 to 2008. The database of available tests includes 217 single recliner, 65 dual recliner, and 18 ABTS seats. The trends in seat strength were determined by linear regression and differences between seat types were evaluated by Student's t-test. The average peak moment and force supported by the seat was determined by decade of vehicle model year (MY).
Results: Single recliner seats were used in motor vehicles in the 1960s to 1970s. The average strength was 918 ± 224 Nm (n = 26) in the 1960s and 1,069 ± 293 Nm (n = 65) in the 1980s. There has been a gradual increase in strength over time. Dual recliner seats started to phase into vehicles in the late 1980s. By the 2000s, the average strength of single recliner seats increased to 1,501 ± 335 Nm (n = 14) and dual recliner seats to 2,302 ± 699 Nm (n = 26). Dual recliner seats are significantly stronger than single recliner seats for each decade of comparison (P < .001). The average strength of ABTS seats was 4,395 ± 1,185 in-lb for 1989–2004 MY seats (n = 18). ABTS seats are significantly stronger than single or dual recliner seats (P < .001). The trend in ABTS strength is decreasing with time and converging toward that of dual recliner seats.
Conclusions: Body block testing is an quantitative means of evaluating the strength of seats for occupant loading in rear impacts. There has been an increase in conventional seat strength over the past 50 years. By the 2000s, most seats are 1,700–3,400 Nm moment strength. However, the safety of a seat is more complex than its strength and depends on many other factors. 相似文献
Researchers with the National Institute for Occupational Safety and Health (NIOSH) studied the potential for lithium-ion cell thermal runaway from an internal short circuit in equipment for use in underground coal mines. In this third phase of the study, researchers compared plastic wedge crush-induced internal short circuit tests of selected lithium-ion cells within methane (CH4)-air mixtures with accelerated rate calorimetry tests of similar cells. Plastic wedge crush test results with metal oxide lithium-ion cells extracted from intrinsically safe evaluated equipment were mixed, with one cell model igniting the chamber atmosphere while another cell model did not. The two cells models exhibited different internal short circuit behaviors. A lithium iron phosphate (LiFePO4) cell model was tolerant to crush-induced internal short circuits within CH4-air, tested under manufacturer recommended charging conditions. Accelerating rate calorimetry tests with similar cells within a nitrogen purged 353-mL chamber produced ignitions that exceeded explosion proof and flameproof enclosure minimum internal pressure design criteria. Ignition pressures within a 20-L chamber with 6.5% CH4-air were relatively low, with much larger head space volume and less adiabatic test conditions. The literature indicates that sizeable lithium thionyl chloride (LiSOCl2) primary (non rechargeable) cell ignitions can be especially violent and toxic. Because ignition of an explosive atmosphere is expected within explosion proof or flameproof enclosures, there is a need to consider the potential for an internal explosive atmosphere ignition in combination with a lithium or lithium-ion battery thermal runaway process, and the resulting effects on the enclosure. 相似文献