宝钢焦化废水处理技术发展与现状

焦化废水的处理一直是国内外废水处理领域的难题之一。文章以宝钢为例,介绍并分析了该企业焦化废水处理技术的发展与现状。     

Zn/Fe体系湿法催化氧化高效脱除沼气中H2S的研究

提出了Zn/Fe体系湿法催化氧化脱除沼气中H2S新工艺,阐述了反应机理、实验装置和工艺流程,考察了各单因素操作条件对H2S脱除效率的影响,在此基础上进行的综合条件实验,脱硫效率都维持在99.6%以上,净化后沼气中H2S含量低于国家标准。过程不消耗任何化工原料,不产生二次污染,体系无降解问题。     

淹水过程不同土层磷的释放研究

采用土槽模拟实验研究了淹水土壤不同土层磷释放特征及影响因素。实验结果表明:淹水土壤不同土层磷释放呈锯齿状交替变化,但释放量有很大差异,中层释放量最低,上和下层释放量较高,最大磷浓度分别为0.0336mg/L和0.0517mg/L;而不同土层溶液中的亚铁和总铁量正好与之相反,中层铁释放量最大,上层次之,下层最低,且中层释铁量明显高于上层和下层;不同土层溶液随淹水时间pH趋于中性,Eh降低,其中中层溶液Eh下降的幅度大;淹水土壤溶液中各种不同形态铁的氧化物,如因水解和氧化形成的水铁矿以及蓝铁矿在一定程度上影响了土壤磷的释放;同时淹水增加了磷的扩散,地下水有一定量的磷累积。     

氯化蒸馏废酸还原回收锗

以锗烟尘氯化蒸馏后的废盐酸为原料,以废铁为还原剂,使废酸中的有价金属锗以还原态沉淀富集在渣中,强化氧化氯化蒸馏回收四氯化锗,锗的综合回收率达94．10％。同时生产净水剂用液体氯化铁产品。     

我国废钢加工设备发展中的问题及管理建议

我国钢铁工业的快速发展,带动了废钢回收及废钢加工设备产业的发展。介绍了我国废钢加工设备的生产规模及现状,对废钢加工设备制造企业多元化发展现象进行分析,并对废钢加工设备制造企业的规范化管理提出合理化建议。     

鞍山市铁矿景观格局变化的遥感调查

采用1997和2007年2个时相的卫星遥感数据,对鞍山市城区周边铁矿典型景观类型的面积及其10年来的变化进行了遥感调查和分析。结果表明,国有矿山采矿场的面积相对稳定,边界无明显变化,民营矿山采矿场面积增加明显。采矿场面积变化与开采方式有关,国有矿山采用深凹露天开采,对地表破坏较轻,民营矿山采用山坡露天开采,对地表破坏较严重。排岩场的总面积有所增加,个别矿区增加明显。复垦绿地有大幅度增加,但仍低于排岩场扩张的速度。     

Degradation of chlorinated phenols by nanoscale zero-valent iron

Chlorophenols (CPs), as important contaminants in groundwater, are toxic and difficult to biodegrade. Recently nanoscale zero-valent iron received a great deal of attention because of its excellent performance in treating recalcitrant compounds. In this study, nanoscale zero-valent iron particles were prepared using chemical reduction, and the reductive transformations of three kinds of chlorinated phenols (2-CP, 3-CP, and 4-CP) by nanoscale zero-valent iron under different conditions were investigated. The transformation process of the CPs was shown to be dechlorination first, then cleavage of the benzene ring. The removal efficiency of the CPs varied as follows: 2-CP > 3-CP > 4-CP. The reactivity of CPs was associated with their energy of lowest unoccupied molecular orbit (E _LUMO). With the increase in initial concentrations of CPs, removal efficiency decreased a little. But the quantities of CPs reduced increased evidently. Temperature had influence on not only the removal efficiency, but also the transformation pathway. At higher temperatures, dechlorination occurred prior to benzene ring cleavage. At lower temperatures, however, the oxidation product was formed more easily. __________ Translated from China Environmental Science, 2006, 26(6): 698–702 [译自: 中国环境科学]     

Effect of bioethanol and thermal barrier coating on the performance of dual fuel engine operating on Honge oil methyl ester (HOME) and producer gas induction

Alternative fuels have numerous advantages compared to fossil fuels as they are renewable, biodegradable; provide energy security and foreign exchange saving besides addressing environmental concerns and socio-economic issues as well. Renewable fuels can be used predominantly as fuel for both transportation and power generation applications. Improved engine performance with reduced engine exhaust emissions is a major research objective in engine development. Today, the use of biomass derived producer gas is more relevant for addressing rural power generation and is a promising technique for controlling both nitric oxide (NO_x) and soot emission levels. In view of this, exhaustive experiments on the use of Honge oil methyl ester (HOME)–Producer gas in a dual fuel engine have been carried out with an intension of improving its fuel efficiency. This paper mainly presents results on a single cylinder four stroke direct injection diesel engine operated in dual fuel mode using HOME–Producer gas combination with and without bio-ethanol addition and thermal barrier coating (TBC). Further, the results were compared with diesel–producer gas mode of operation. Experimental investigation on dual fuel operation using HOME+5% bioethanol (BE5)–Producer gas operation with TBC showed 12.35% increased brake thermal efficiency with decreased hydrocarbon and carbon monoxide emissions and increased NO_x emission levels compared to HOME–Producer gas mode of operation.     

钢铁生产行业二英污染特征变化及其排放因子

对我国某省多家钢铁生产企业烧结工序和电炉工序排放烟气中二英（PCDD/Fs）污染水平、排放特征及其排放因子进行了初步研究.结果表明,烧结工序PCDD/Fs毒性当量浓度（以I-TEQ计,下同）为0.003~0.557 ng·m^-3,均值为0.165 ng·m^-3;电炉工序PCDD/Fs毒性当量浓度为0.006~0.057 ng·m^-3,均值为0.025 ng·m^-3.PCDD/Fs毒性当量浓度水平总体较低,较2005~2019年研究报道结果下降1~2个数量级.2005~2020年,钢铁生产行业排放PCDD/Fs毒性当量浓度水平先升高后降低,尤其是新的标准限值实施以及对烟尘等常规污染物进行超低排放控制后,呈现大幅下降.指纹谱图特征显示,所有烟气样品17种PCDD/Fs中最大浓度贡献单体为2,3,7,8-TCDF,与已有研究中以高氯代PCDFs和PCDDs为主不同,且低氯代PCDFs占比有所增加,表明PCDD/Fs生成主要来源有所变化.烧结工序和电炉工序PCDD/Fs同类物指纹分布特征相似,呈现典型的高温热过程特征,两个工序生产过程中PCDD/Fs的生成机制可能均为"从头合成".钢铁生产企业烧结工序PCDD/Fs废气排放因子（以I-TEQ计,下同）为0.003~0.5 μg·t^-1,排放因子平均值为（0.18±0.22）μg·t^-1;电炉工序PCDD/Fs废气排放因子为0.04~0.5 μg·t^-1,排放因子平均值为（0.27±0.23）μg·t^-1;低于UNEP于2013发布的"二英和呋喃排放识别和量化标准工具包"以及2004年我国二英排放清单中的排放因子,建议对我国钢铁生产行业PCDD/Fs排放状况开展调查,更新排放因子.     

硅肥等量施用对土壤镉生物有效性和水稻吸收镉的影响

为研究硅（Si）肥等量施用对水稻不同生育期吸收镉（Cd）和土壤Cd生物有效性的影响,采用5种不同种类的Si肥（SiO₂用量为225 kg ·hm^-2）开展田间小区试验.结果表明,随着水稻生育期的延长,水稻根系和茎叶的Cd含量增加;施用Si肥,不同生育期水稻根系、茎叶和籽粒Cd含量平均分别降低14.9%、28.2%和12.2%;硅钙镁铁肥（SiCaMgFe）和水溶Si肥（SiW）处理,籽粒Cd含量分别比对照处理降低21.1%（P<0.05）和21.2%（P<0.05）;水稻根表铁膜中Cd含量（DCB-Cd）随着水稻生育期延长而增加,施用Si肥,水稻不同生育期DCB-Cd含量有高有低,DCB-Cd是根系Cd含量的15.8%~42.8%;与对照相比,施用Si肥水稻成熟期土壤可交换态Cd （Exc-Cd）含量平均降低36.4%,其它形态的含量平均增加12.5%~48.2%.水稻全生育期根系Cd与Si呈极显著负相关,与DCB-Cd呈极显著正相关,DCB-Cd与土壤有效态Cd和有效态Si呈极显著负相关,土壤Exc-Cd与Carb-Cd呈极显著负相关,土壤有效态Cd与pH值呈显著负相关.施用相同Si肥用量,SiCaMgFe和SiW处理降低水稻Cd含量的效果好;施用Si肥通过提高土壤pH值和土壤有效Si含量、降低土壤有效态Cd和Exc-Cd含量,促进Exc-Cd向Carb-Cd转移,减少根表铁膜对Cd的吸附,从而减少水稻对土壤Cd的吸收.