酸性条件下微波改性活性碳纤维对Pb(Ⅱ)的吸附

采用微波辐照的方法,在混酸条件下对活性碳纤维(ACF)进行改性,制备得到一种改性活性碳纤维(M-ACF).通过小试吸附实验考察了微波功率、溶液pH值对M-ACF吸附Pb(Ⅱ)的影响.通过扫描电子显微镜(SEM)、红外光谱(FTIR)、电子能谱(EDX)等技术对ACF和M-ACF进行表征.结果表明,M-ACF表面的羧基等酸性含氧官能团增多,纤维长度变短且表面粗糙化.当M-ACF的投加量为10 mg、含铅溶液初始浓度为50 mg/L、pH为6、吸附时间为24 h、吸附温度为308 K时,M-ACF对Pb(Ⅱ)的吸附量高达248.5 mg/g.吸附过程符合准二级动力学模型和Langmuir等温吸附模型;热力学参数表明吸附为吸热、自发的过程.     

微波辅助白腐真菌煤炭脱硫试验研究

将微波技术与生物技术相结合用于煤炭脱硫,采用微波功率1 000 W、辐照时间80 s对煤样进行辐照处理后,考察了初始pH值、煤粉粒径和煤浆浓度对微波辅助白腐真菌脱硫效果的影响,以及脱硫过程中硫化物的转化规律。研究结果表明,微波辐照作用能够缩短脱硫周期,提高有机硫的脱除率。在初始pH值为4.5,煤粉粒径为80～120目,煤浆浓度为10%,浸出时间为3 d的条件下,煤中的全硫、无机硫和有机硫脱除率分别达到52.06%、51.61%和54.22%。     

微波辐射在烟秆废料制造活性炭中的应用

文章介绍了微波辐射烟秆废料制造活性炭技术,其中包括氯化锌法和水蒸气法,并采用该技术进行了试验,取得了较好的效果。     

Parameters effect on heterogeneous photocatalysed degradation of phenol in aqueous dispersion of TiO_2

In this study, photocatalytic degradation of phenol selected as model compound of organic pollutant had been investigated in aqueous titanium dioxide (TiO2) dispersion under UV irradiation. The effects of various parameters such as pH, catalyst concentration, phenol concentration, anions, metal ions, electron acceptors, and surfactants on the photocatalytic degradation of phenol were investigated. The degradation kinetics was determined by the change in phenol concentration employing UV-Vis spectrometry as a function of irradiation time. The degradation kinetics of phenol follows pseudo first-order kinetics. The results showed a significant dependence of the photocatalytic degradation of phenol on the functional parameters. The probable promising roles of the additives on the degradation process were discussed.     

大气环境变化对污染土壤中PBDEs自然降解过程的影响研究

以模拟电子垃圾拆解区污染土壤中的多溴联苯醚(PBDEs)为研究对象,采用室内模拟的方法,考察了臭氧浓度的上升及光照条件、温度和土壤pH值等环境因素对土壤中PBDEs自然降解过程的影响.研究结果表明:臭氧浓度的升高能明显促进PBDEs的自然降解,且臭氧浓度越高BDE-209的降解率越高,随着土壤深度增加,BDE-209去除率则相应降低,10 mg·L-1的臭氧在2 h内对深层土壤中BDE-209的去除率可达99%.光照强度为1.0 m W·cm-2的持续紫外光照条件下,土壤中BDE-209的降解现象较为明显,且光降解速率随光强的增强而增大.40℃的夏季地面高温及pH=9.0的弱碱性土壤均有利于PBDEs的自然降解.此外,PBDEs的降解过程是逐步脱溴的过程.PBDEs的降解过程既包括了BDE-209的降解,也包括了中间产物(BDE-28、BDE-47、BDE-99、BDE-100、BDE-153、BDE-154和BDE-183)的降解.当BDE-209去除率达到一定程度且中间产物逐渐积累达一定量时,中间产物的降解反应逐渐成为主导反应,导致PBDEs总量逐渐降低.     

Experimental design of Fenton and photo-Fenton reactions for the treatment of cellulose bleaching effluents

Multivariate experimental design was applied to the treatment of a cellulose conventional bleaching effluent in order to evaluate the use of the Fenton reagent under solar light irradiation. The effluent was characterised by the general parameters total organic carbon (TOC), chemical oxygen demand and color, and it was analysed for chlorinated low molecular weight compounds using GC–MS. The main parameters that govern the complex reactive system: Fe(II) and H₂O₂ initial concentration, and temperature were simultaneously studied. Factorial experimental design allowed to assign the weight of each variable in the TOC removal after 15 min of reaction. Temperature had an important effect in the organic matter degradation, especially when the ratio of Fenton reagents was not properly chosen. Fenton reagent under solar irradiation proved to be highly effective for these types of wastewaters. A 90% TOC reduction was achieved in only 15 min of treatment. In addition, the GC–MS analysis showed the elimination of the chlorinated organic compounds initially detected in the studied bleaching effluents.     

Photodegradation of Dyes in Aqueous Solutions containing Fe(III) -hydroxy Complex II. Solar Photodegradation Kinetics

The solar photodegradation of five dyes, C.I. reactive red 2, C.I. reactive blue 4, C.I. reactive black 8, C.I. basic red 13, and C.I. basic yellow 2, were studied in a sunlight/Fe(III)-hydroxy system. It was observed that the photodegradation of these five dyes were pseudo-first order reactions, which has a little difference with the photodegradation kinetics of the dyes with UV-light as the irradiation source. The comparison between the two studies is also conducted.     

Enzymatic Degradation of Poly(l-Lactic Acid): Effects of UV Irradiation

Amorphous and crystallized poly(l-lactic acid) (PLLA-A and PLLA-C, respectively) films were prepared, and the proteinase K-catalyzed enzymatic degradation of UV-irradiated and non-irradiated PLLA-A and PLLA-C films was investigated for periods up to 10 h (PLLA-A) and 60 h (PLLA-C). The molecular weights of both the PLLA-A and PLLA-C films can be manipulated by altering the UV irradiation time. The enzymatic weight loss values of the UV-irradiated PLLA films were higher than or similar to those of the non-irradiated PLLA film, when compared with the specimens of same crystallinities. UV irradiation is expected to cause the PLLA films to undergo chain cleavage (a decrease in molecular weight) and the formation of C=C double bonds. It seems that the acceleration effects from decreased molecular weight on enzymatic degradation were higher than or balanced with the disturbance effects caused by the formation of C=C double bonds. After enzymatic degradation, a fibrous structure appeared on the spherulites of the UV-irradiated PLLA-C film. This structure may have arisen from chains containing or neighboring on the C=C double bonds, which were enzymatically undegraded and assembled on the film surface during enzymatic degradation. The results of this study strongly suggest that UV irradiation will significantly affect the biodegradation behavior of PLLA materials in the environment.     

GC-MS在电子束辐照降解甲苯中的应用

用甲苯作为挥发性有机化合物的代表物质,建立了活性炭吸附-二硫化碳解吸气相色谱-质谱分析方法,对电子束辐照甲苯的静态实验和动态实验进行了定性、定量分析。实验结果表明：电子束辐照能有效地降解甲笨,其降解率随吸收剂量的增加而增大;同时,甲苯降解过程中也会生成部分有毒有害物质。该分析方法的检出限为0．02mg／L,工作曲线的线性范围为10～1000mg／L,相关系数为0．9998,活性炭吸附、解吸甲苯的加标回收率大于90％。     

深部大跨度泥质顶板剪切冒落失稳区预测研

为了预测深部大跨度泥质顶板剪切冒落失稳区范围,基于泥岩峰后黏聚力软化-内摩擦角硬化的力学特性,获得了基于Mohr-Coulomb理论的泥岩峰后黏聚力软化-内摩擦角硬化的力学模型及参数,构建了深部大跨度泥质巷道数值模型,提出了泥岩峰后各强度参数变化对巷道顶板剪切破坏区的影响范围。结果表明:泥岩在峰后剪切破坏过程中具有明显的黏聚力软化-内摩擦角硬化特性;基于泥岩峰后黏聚力软化-内摩擦角硬化计算获得的巷道顶板剪切冒落高度小于黏聚力软化-内摩擦角软化的计算高度;巷道顶板潜在剪切破坏区位置及范围与泥岩峰后黏聚力软化-内摩擦角硬化计算结果十分接近。