臭氧氧化及其他强化技术协同降解聚乙烯醇

采用O₃氧化降解水中聚乙烯醇（PVA）,考察了O₃氧化的影响因素及与其他强化技术协同下的降解效果。结果表明,经12 min处理,O₃/超声波、O₃/紫外光协同作用下PVA降解率较直接O₃氧化的63.2%有显著提高,表现出了良好的协同效应。通过比较酸性条件下添加不同量Fenton试剂的作用效果可知,·OH的氧化作用是PVA降解的重要原因。     

廉价包埋剂聚乙烯醇的研究

以洗衣粉废水中的LAS为处理对象,研究了PVA-硼酸化法固定化微生物细胞的物理特性、废水处理特性及相关特性。其多孔结构、高机械稳定性、良好的贮藏性和活性可恢复性、污泥产量少及固定化增殖细胞的性质等说明PVA是有开发实用价值的廉价包埋剂。     

Immobilization of activated sludge using improved polyvinyl alcohol （PVA） gel

The microbial immobilization method using polyvinyl alcohol(PVA)gel as an immobilizing material was improved and used for entrapment of activated sludge.The oxygen uptake rate(OUR)was used to characterize the biological activity of immobilized activated sludge.Three kinds of PVA-immobilized particles of activated sludge,that is,PVA-boric acid beads,PVA-sodium nitrate beads and PVA-orthophosphate beads were prepared,and their biological activity was compared by measuring the OUR value.The bioactivity of both autotrophic and heterotrophic microorganisms of activated sludge was determined using different synthetic wastewater media (containing 250 mg/L COD and 25 mg/L NH_4~ -N).The experimental results showed that the bioactivity and stability of the three kinds of immobilized activated sludge was greatly improved after activation.With respect of the bioactivity and the mechanical stability,the PVA-orthophosphate method may be a promising and economical technique for microbial immobilization.     

红球菌J-5菌株降解聚乙烯醇的研究

从土壤样品中分离到一株能以聚乙烯醇(PVA)为唯一碳源、能源生长的纯菌株,经生理生化鉴定和16S rRNA基因序列分析,该菌株属于红球菌属(Rhodococcus sp.),对该菌株降解PVA的特性进行了研究.结果表明,该菌株降解PVA的适宜条件为10000mg/L PVA,25℃,摇床培养;此外,添加0.1%的酵母膏可以明显促进PVA的降解.在该条件下通气培养7d,可以降解58%的PVA,通过红外光谱分析PVA的代谢产物,说明PVA降解的中间产物带有羰基.     

Copper biosorption on immobilized seaweed biomass： Column breakthrough characteristics

The biosorption of copper by the brown seaweed Sargassum baccularia,immobilized onto polyvinyl alcohol(PVA)gel beads, was investigated with fixed-bed experiments.Laboratory-scale column tests were performed to determine breakthrough curves with varying flow rates and feed concentrations.A theoretical fixed-bed model,known as the Bohart-Adams equation,was evaluated in simulating the experimental breakthrough curves.The Bohart-Adams model qualitatively predicted the breakthrough trends.PVA- immobilized seaweed biomass beads were amenable to efficient regeneration with aqueous solution containing the chelating agent ethylenediaminetetraacetic acid(EDTA).The biosorbent retained most of its original uptake capacity over three cycles of use.The excellent reusability of the biosorbent could lead to the development of a viable metal remediation technology.     

介孔ZnO负载Fe-Cu-Zr复合催化剂用于催化燃烧降解乙酸丁酯

采用醇热法制备了有序球状介孔ZnO负载Fe-Cu-Zr复合催化剂,应用BET、SEM、XRD、XPS等对不同物质的量比催化剂进行了表征,研究了催化降解乙酸丁酯的活性及其影响因素,并推测了降解机理.结果表明,铁铜锆复合催化剂颗粒均匀,分散性较好,孔径大部分小于50 nm,比表面积为46～68 m²·g^-1.各活性成分能够共存和协同发挥作用,铁、铜、锆离子吸附在氧化锌晶胞内,粒子间量子作用力促使晶胞表面积略有变大.锆能够提高3种活性成分间的作用力,可以调节表面电子密度,促使结合能向低的方向偏移,增强催化剂的氧化还原能力.随着锆比例的增大,催化剂的活性也随之增强;随着初始浓度、空速、相对湿度的增加,乙酸丁酯降解效率均有所下降.在乙酸丁酯初始浓度为2590 mg·m^-3、空速为9000 h^-1的工况下,ZnO-3M催化剂降解乙酸丁酯的T₅₀为116℃,T₉₀为200℃,270℃时CO₂转化率达96%,具有良好的低温催化活性和稳定性.乙酸丁酯催...     

Simplified creation of polyester fabric supported Fe-based MOFs by an industrialized dyeing process: Conditions optimization, photocatalytics activity and polyvinyl alcohol removal

MIL-53(Fe) was successfully prepared and deposited on the surface carboxylated polyester (PET) fiber by an optimized conventional solvothermal or industrialized high temperature pressure exhaustion (HTPE) process to develop a PET fiber supported MIL-53(Fe) photocatalyst ([email protected]) for the degradation of polyvinyl alcohol (PVA) in water under light emitting diode (LED) visible irradiation. On the basis of several characterizations, [email protected] was tested for the photocalytic ability and degradation mechanism. It was found that temperature elevation significantly enhanced the formation and deposition of MIL-53(Fe) with better photocatalytic activity. However, higher temperature than 130°C was not in favor of its photocatalytic activity. Increasing the number of surface carboxyl groups of the modified PET fiber could cause a liner improvement in MIL-53(Fe) loading content and photocatalytic ability. High visible irradiation intensity also dramatically increased photocatalytic ability and PVA degradation efficiency of [email protected] Na₂S₂O₈ was used to replace H₂O₂ as electron acceptor for further promoting PVA degradation in this system. [email protected] prepared by HTPE process showed higher MIL-53(Fe) loading content and slightly lower PVA degradation efficiency than that prepared by solvothermal process at the same conditions. These findings provided a practical strategy for the large-scale production of the supported MIL-53(Fe) as a photocatalyst in the future.