Fluid bed gasification – Plasma converter process generating energy from solid waste: Experimental assessment of sulphur species

Often perceived as a Cinderella material, there is growing appreciation for solid waste as a renewable content thermal process feed. Nonetheless, research on solid waste gasification and sulphur mechanisms in particular is lacking. This paper presents results from two related experiments on a novel two stage gasification process, at demonstration scale, using a sulphur-enriched wood pellet feed.Notable SO₂ and relatively low COS levels (before gas cleaning) were interesting features of the trials, and not normally expected under reducing gasification conditions. Analysis suggests that localised oxygen rich regions within the fluid bed played a role in SO₂’s generation. The response of COS to sulphur in the feed was quite prompt, whereas SO₂ was more delayed. It is proposed that the bed material sequestered sulphur from the feed, later aiding SO₂ generation. The more reducing gas phase regions above the bed would have facilitated COS – hence its faster response. These results provide a useful insight, with further analysis on a suite of performed experiments underway, along with thermodynamic modelling.     

煤及煤矸石中砷的释放

研究了煤及煤矸石中砷的释放特征。采用XRD技术对煤样中的主要矿物成分进行了分析。表征结果显示,煤样中的主要矿物组成为碳酸盐矿物、硅酸盐矿物,以及一定量的SiO2、TiO2、硫化物矿物和硫酸盐矿物。实验结果表明：煤中砷的赋存形态主要以残渣态和硫化物结合态为主;在煤燃烧过程中,当燃烧温度为1 000 ℃时,1号矿井的煤样燃烧后灰渣中的砷含量为1.385 μg/g,砷的释放率为40.10%,2号矿井的煤样燃烧后灰渣中的砷含量为1.531 μg/g,砷的释放率为56.04%;在煤矸石的淋溶过程中,在淋溶液体积为100 mL的条件下,当淋溶液pH为5时淋出液中的ρ（砷）为19.27 μg/L,当淋溶液pH为7时淋出液中的ρ（砷）为7.78 μg/L。     

废环氧树脂/PVC复合材料的性能

将废环氧树脂与聚氯乙烯(PVC)共混,采用模压工艺制备复合材料。通过正交实验,讨论废环氧树脂添加量、硅烷偶联剂KH-550用量、模压时间3个因素对复合材料力学性能的影响大小,得到其优化条件。在正交实验所得优化条件基础之上,研究单因素对复合材料的影响,最终确定实验的最优方案。结果表明:当模压时间10 min,废环氧树脂添加量70%,硅烷偶联剂用量2份时,复合材料的力学性能达到最优,冲击强度为10.49 kJ/m2,拉伸强度为62.24 MPa。     

工业废水污泥的热解及升温速率对热解的影响

利用热重分析法对印染、中药和废水处理厂3种典型工业废水污泥进行了热解动力学实验研究。结果表明,工业污泥是一种高挥发分、低固定碳和低热值的劣质燃料。经过消化处理的污泥灰分含量较高,挥发分含量变小。热解过程中有3个失重速率较高的阶段,以挥发分的析出为主。升温速率对热解的最终失重率有重要影响。升温速率增加,热解更剧烈,但最终失重率的变化趋势与污泥种类有关;为使热解效果更好,不同种类的污泥应选择不同的升温速率。不同种类的污泥具有不同的热解特性,印染污泥挥发分析出阶段有2次热解。中药污泥活化能最小,印染污泥挥发分第2次热解的活化能比第1次大幅增加。     

沙雷氏菌发酵蓝藻生产蛋白酶

以富含蛋白质的蓝藻作有机氮源进行微生物发酵生产蛋白酶,为蓝藻的资源化利用提供一条新途径。采用单因素实验,研究了影响沙雷氏菌发酵蓝藻生产蛋白酶的培养基主要成分。结果发现,在实验范围内,沙雷氏菌发酵蓝藻生产蛋白酶的最佳碳源是蔗糖,最佳速效氮源是尿素,最佳金属离子(盐)是ZnSO4,最佳产酶促进剂是吐温80。在单因素实验中,发酵上清液的蛋白酶活最高可达到941 U/mL,而且发酵周期短,发酵培养18 h即可达到最高酶(活)值。     

PVDF/PMMA与PVDF/TPU共混膜抗污染性能研究及应用

观察新型五孔PVDF共混改性纤维膜SEM形貌特征,采用逐级通量法测定PVDF/PMMA和PVDF/TPU共混改性膜的临界通量,研究在次临界和超临界通量下A(PVDF/PMMA)与B(PVDF/TPU)2种管式膜组件的过滤和抗污染性能,并在次临界通量下处理地表水。结果表明,PVDF共混改性膜具有优良的微观结构,且膜B性能较好;膜A、B的临界通量分别为12 L/(m2.h)和10 L/(m2.h);膜组件B比膜组件A抗污染性能好。次临界通量下膜组件的运行比超临界通量下的稳定。与采用单独超滤处理某市地表水相比,2种膜组件采用混凝+超滤工艺的运行处理效果更好,且膜组件B比膜组件A处理效果佳。     

k-C＊模型的人工湿地模拟研究

采用自由表面流人工湿地,对广东省中山市某小区对应段的河涌进行生态修复改造。基于k-C＊模型的计算结果表明,在对现有河涌的面积的利用下,TP和NH4＋-N的去除效果受到限制。采用多因素正交实验对模型的计算结果进行实验验证和分析,研究了4种植物、4种基质,分别在2、4、6和8 d水力停留时间（HRT）下对TP和NH4＋-N的去除效果,得到影响TP和NH4＋-N去除效果的因素主次顺序分别为基质→植物→HRT和基质→HRT→植物;各因素的最佳水平条件分别为：风车草、颗粒活性炭、4 d（HRT）。在最佳水平条件下进行实验,结果表明,TP和NH4＋-N的浓度均可达到出水排放标准浓度指标。k-C＊模型的计算值总是比实验值偏高,但两者之间的误差在一个数量级范围内。     

Using stable lead isotopes to trace heavy metal contamination sources in sediments of Xiangjiang and Lishui Rivers in China

Lead isotopes and heavy metal concentrations were measured in two sediment cores sampled in estuaries of Xiangjiang and Lishui Rivers in Hunan province, China. The presence of anthropogenic contribution was observed in both sediments, especially in Xiangjiang sediment. In the Xiangjiang sediment, the lower ²⁰⁶Pb/²⁰⁷Pb and higher ²⁰⁸Pb/²⁰⁶Pb ratio, than natural Pb isotope signature (1.198 and 2.075 for ²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁶Pb, respectively), indicated a significant input of non-indigenous Pb with low ²⁰⁶Pb/²⁰⁷Pb and high ²⁰⁸Pb/²⁰⁶Pb. The corresponding concentrations of heavy metals (As, Cd, Zn, Mn and Pb) were much higher than natural values, suggesting the contaminations of heavy metals from extensive ore-mining activities in the region.     

水培彩叶草抑制藻类繁殖的试验研究

通过人为控制光照、温度和培养液体积栽种水培彩叶草(简称彩叶草),并对彩叶草的抑藻能力进行测定,分析了彩叶草抑藻过程中营养物质浓度变化,并与凤眼莲的抑藻效果进行对比.结果表明,在不同培养条件下,彩叶草均能明显抑制藻类的过度生长;在保持培养液营养物质自然变化的条件下,栽种彩叶草与不栽种彩叶草培养液的营养物质浓度均直线下降,...     

废旧线路板次氯酸盐法浸金的实验研究

研究了酸性条件NaClO-HCl和碱性条件NaClO-NaOH下浸出废旧线路板中的金.通过正交设计优化实验比较发现,NaClO-NaOH碱性体系浸金较有优势,其最佳的浸金条件为NaClO浓度6 mol/L,NaOH浓度8 mol/L,固液比l∶6,反应时间40 min,金的浸出率可达到94.5%.次氯酸盐浸金具有浸金效...