交通来源颗粒物排放因子的研究

用谭裕沟隧道TSP,PM₁₀和PM_2.5的质量浓度和主要成分的分析结果,得到一定机动车流量和速度下交通来源不同粒径颗粒物质量浓度和主要成分的平均排放因子,可以基本代表北京市机动车行驶的综合排放因子,具有应用价值.还估算了北京市交通来源不同粒径颗粒物及其主要化学成分的排放量.      

郑州空气颗粒物中PAHs的碳同位素特征及来源

研究了郑州城区空气颗粒物中多环芳烃(PAHs)的稳定碳同位素组成特征并对其来源进行了解析.气相色谱/燃烧系统/同位素质谱(GC/C/IRMS)分析表明,PAHs 的δ¹³C 值在非采暖季为-29.4‰～-23.4‰,采暖季为-30.0‰～-24.2‰,随着分子量的增大,PAHs 中 13C 降低.统计表明不同采样点的样品中的 PAHs 的δ¹³C 区别不明显(0.1‰<σ<0.8‰).两个季节中,三环和四环多芳香烃化合物荧蒽、芘和苯并(a)蒽的δ¹³C没有明显的区别,其范围为-24.5‰～-23.4‰,但是,五环和六环芳烃的δ¹³C 值有明显差异.随着分子量的增大,采暖季环境空气颗粒物中 PAHs的碳同位素比值变小的程度比非采暖季的大.采暖季的苯并(a)芘、茚并(1,2,3-cd)芘、苯并(ghi)苝的δ13C 值分别为-26.6‰、-30.0‰和-28.1‰,而非采暖季为-24.5‰、-29.4‰和-26.3‰.利用二元复合同位素模型,估算了不同季节机动车尾气和煤的燃烧对郑州城区苯并(a)芘的贡献.在非采暖季机动车尾气排放的贡献率为 70%,在采暖季贡献率为 50%,煤的燃烧对六环化合物的贡献高于机动车排放的贡献.     

采用正交实验优化湿热法处理厨余垃圾的工艺条件

实验采用3因素3水平的正交实验设计方法,研究了湿热法处理厨余垃圾并使其饲料化的加工工艺中,时间、温度、加水量对厨余垃圾饲用价值的影响,选取粗蛋白、粗脂肪、粗纤维、粗灰分、钙和盐分为评价指标,确定反应的最佳工艺条件。实验结果表明,反应的最佳工艺条件为温度100℃、加水量50%、反应时间30 m in。     

从业人员安全能力评估系统的设计与实验

从业人员的安全能力与岗位要求相匹配对预控事故非常重要,而目前缺乏较为全面评估个体安全能力的方法,为此,结合实验测量法和量表自测法,构建出从业人员安全能力各指标要素的测试方法并完成实验;统计分析各安全能力指标的实验数据,拟合出各要素的数学函数,并建立数据库;设计开发出从业人员安全能力的评估系统,结合样本人员,完成该实验系统的展示。研究成果可用于区别不同安全能力的员工,为不同职业岗位甄选提供了支持。     

Golden Eagle fatalities and the continental‐scale consequences of local wind‐energy generation

Renewable energy production is expanding rapidly despite mostly unknown environmental effects on wildlife and habitats. We used genetic and stable isotope data collected from Golden Eagles (Aquila chrysaetos) killed at the Altamont Pass Wind Resource Area (APWRA) in California in demographic models to test hypotheses about the geographic extent and demographic consequences of fatalities caused by renewable energy facilities. Geospatial analyses of δ²H values obtained from feathers showed that ≥25% of these APWRA‐killed eagles were recent immigrants to the population, most from long distances away (>100 km). Data from nuclear genes indicated this subset of immigrant eagles was genetically similar to birds identified as locals from the δ²H data. Demographic models implied that in the face of this mortality, the apparent stability of the local Golden Eagle population was maintained by continental‐scale immigration. These analyses demonstrate that ecosystem management decisions concerning the effects of local‐scale renewable energy can have continental‐scale consequences.     

Pedestrian behavior and exit selection in evacuation of a corridor - An experimental study

In this paper, we present an experiment whose purpose was to study evacuees’ exit selection under different behavioral objectives. The experiment was conducted in a corridor with two exits located asymmetrically. This geometry was used to make most participants face a nontrivial decision on which exit to use. We analyze the behavior on a macroscopic level using statistical methods. Our results suggest that the members of an evacuating crowd may not be able to make optimal decisions when assessing the fastest exit to evacuate. In addition, the egress time of the whole crowd turns out to be shorter when the evacuees behave egoistically instead of behaving cooperatively. This is an interesting result because many studies on real emergencies show that evacuees tend to cooperate and act altruistically.     

古堆泉域岩溶地下水水化学特征及成因

古堆泉为山西省著名岩溶大泉之一,是唯一的中低温温泉,具有悠久的开发观赏历史,凝聚着丰厚的人文积淀.以古堆泉域岩溶地下水为研究对象,通过系统地样品采集与同位素分析,综合运用水化学（Durov图、离子比例、Gibbs图和氢氧同位素）同位素方法分析地下水水化学特征和地下水系统径流特征.古堆泉域岩溶地下水的⁸⁷ Sr/⁸⁶ Sr值在0.709~0.717之间,Mg/（Mg+Ca）值在0.27~0.74之间.通过分析Sr同位素组成和Mg/（Mg+Ca）、1/Sr变化特征,得出古堆泉域岩溶地下水为深部热水与浅部冷水的混合水,中条山南梁泉岩溶水子系统呈现碳酸盐岩地层径流特征,佛岭山-高显海头泉岩溶水子系统和侯马盆地深循环子系统呈现碳酸盐岩地层与火成岩地层径流特征,塔儿山-九原山古堆泉岩溶水子系统呈现碳酸盐岩地层与古老硅铝质岩地层径流特征.通过2014年样品与2021年相同位置取样点的氢氧同位素比对分析,得出古堆泉口水样变化原因是其受三泉水库补给随时间的积累的结果,三泉水库的变化原因是受引黄水的影响.研究区岩溶地下水水化学类型可分为SO₄-Na、SO₄-Ca、HCO₃-Na、HCO₃-Mg、HCO₃-Ca和Cl-Na型.岩溶地下水水化学类型从HCO₃-Ca·Mg→HCO₃·SO₄-Ca·Mg→SO₄·HCO₃-Na·Ca→SO₄·Cl-Na·Ca呈现明显的水化学成分分带.     

大气降水中稳定同位素研究进展

酸雨是目前人类所面临的主要环境问题之一,中国已成为继欧洲和北美之后的世界第三大酸雨区。大气降水化学组成、物质来源及其贡献是酸沉降研究的重要内容,可以为酸雨成因、发展趋势和制定相应政策提供依据。大气降水同位素组成是解析和确定降水物质来源及其贡献的重要手段。大气中的二氧化硫和氮氧化合物是导致雨水酸化的两个主要组分,另外我国大气降水中还含有大量碱性离子可以中和雨水中的酸性物质。本文对硫、氮、锶同位素在大气降水中物质示踪方面的应用进行了总结,并提出了一些值得重视的研究方向。     

Basic properties of sintering dust from iron and steel plant and potassium recovery

With the production of crude steel, China produces several million tons of sintering dusts which contain a great deal of valuable metals such as, K, Na, Zn, Pb. If discharged directly without adequate treatment, these elements can lead to adverse effects on the environment. Therefore, it is very necessary to determine how to separate these elements from the dust before discharge. Several physical and chemical detection methods were used to study the basic properties of sintering dust. At the same time, preliminary experiments on the recovery of the potassium resources from the sintering dust were carried out. The mean particle size of the electrostatic precipitator (ESP) dust determined by a laser granulometer was 41.468 μm. Multi-point BET and single-point BET analysis showed that the surface area of the ESP dust was 2.697 m²/g. XRD measurements detected the following phases in the ESP dust: Fe₂O₃, Fe₃O₄, KCl and NaCl, and Fe₂O₃, Fe₃O₄ and SiO₂ in the water-washed dust. SEM-EDS results proved that in the ESP dust, K mostly existed in the form of KCl particles without being coated. Leaching experiments showed that the KCl in the ESP dust could be separated and recovered by water leaching and fractional crystallization. Through the recovery experiments, the yield of K-Na vaporized crystalline salt was 18.56%, in which the mass fractions of KCl, NaCl, CaSO₄ and K₂SO₄ were about 61.03%, 13.58%, 14.03% and 9.97%, respectively. This process is technically viable and considerable in economic benefit. There was almost no secondary pollution produced in the whole recovery process.     

Machining efficiency of powder mixed near dry electrical discharge machining based on different material combinations of tool electrode and workpiece electrode

Powder mixed near dry electrical discharge machining (PMND-EDM) is a novel electrical discharge machining (EDM) process. It is proposed to further improve the machining efficiency of dry EDM. The principle of material removal in PMND-EDM is illustrated and its deionization principle is proposed. The influence of residual heat on MRR is analyzed. The concept of superfluous residual heat is proposed. The material removal rate (MRR), the main index of machining efficiency for PMND-EDM process, is researched. Single factor experiments are performed to get effect of peak current, pulse on time, pulse off time, flow rate, tool rotational speed, air pressure and powder concentration on MRR under different material combinations of tool electrode and workpiece electrode. Thermal phenomena in PMND-EDM are illustrated. Effect of each process parameter on MRR of PMND-EDM is gotten and analyzed based on the deionization principle of PMND-EDM. Differences in MRR under different material combinations are found out. Brass tool electrode and W18Cr4V workpiece gain higher MRR under most of discharge conditions, while the superiority of copper tool electrode and 45 carbon steel workpiece in MRR arise when there is improper heat dissipation. The difference is analyzed based on the deionization principle of PMND-EDM.