Inherently safer sustained casing pressure testing for well integrity evaluation

This paper presents the use of a model to predict sustained casing pressure (SCP), from early pressure buildup data, as a basis for inherently safer well integrity testing. Inherently safer principles aim to eliminate or reduce the hazards by design rather than by using protective features. SCP, a well integrity issue exhibited in many wells, is any measurable pressure that rebuilds after being bled down and attributable to causes other than artificially applied pressure or temperature fluctuations in the well. Intrusion of gas, resulting in SCP, can occur because of poor cement bond in the casing or cement deterioration. Gas entering the annulus migrates to the wellhead and represents a hazard due to increased wellhead pressure and the gas inventory. Compromised well integrity can have catastrophic consequences on both environmental and safety aspects.Most regulations require the monitoring, testing and, eventually, the elimination of SCP. However, test data analysis is predominantly qualitative and limited to arbitrary criteria. Due to the high percentage of wells that present SCP, accurate, safe and preferably fast testing methods are needed. This paper implements an analytical model, rooted in the transport processes and thermodynamics of the system, to predict pressure profiles and gas accumulation during SCP testing from early-time pressure buildup data. The amount of gas accumulated during different testing criteria, being 1) current practices and 2) early diagnostic by the analytical model, is calculated and compared. Results show that using the analytical model as a predictive tool, testing time is reduced significantly, thereby limiting the amount of gas accumulated and reducing the risk. This makes the testing procedure inherently safer as well as less time consuming.     

Fluid bed gasification – Plasma converter process generating energy from solid waste: Experimental assessment of sulphur species

Often perceived as a Cinderella material, there is growing appreciation for solid waste as a renewable content thermal process feed. Nonetheless, research on solid waste gasification and sulphur mechanisms in particular is lacking. This paper presents results from two related experiments on a novel two stage gasification process, at demonstration scale, using a sulphur-enriched wood pellet feed.Notable SO₂ and relatively low COS levels (before gas cleaning) were interesting features of the trials, and not normally expected under reducing gasification conditions. Analysis suggests that localised oxygen rich regions within the fluid bed played a role in SO₂’s generation. The response of COS to sulphur in the feed was quite prompt, whereas SO₂ was more delayed. It is proposed that the bed material sequestered sulphur from the feed, later aiding SO₂ generation. The more reducing gas phase regions above the bed would have facilitated COS – hence its faster response. These results provide a useful insight, with further analysis on a suite of performed experiments underway, along with thermodynamic modelling.     

Effects of a gradually increased load of fish waste silage in co-digestion with cow manure on methane production

This study examined the effects of an increased load of nitrogen-rich organic material on anaerobic digestion and methane production. Co-digestion of fish waste silage (FWS) and cow manure (CM) was studied in two parallel laboratory-scale (8 L effective volume) semi-continuous stirred tank reactors (designated R1 and R2). A reactor fed with CM only (R0) was used as control. The reactors were operated in the mesophilic range (37 °C) with a hydraulic retention time of 30 days, and the entire experiment lasted for 450 days. The rate of organic loading was raised by increasing the content of FWS in the feed stock. During the experiment, the amount (volume%) of FWS was increased stepwise in the following order: 3% – 6% – 13% – 16%, and 19%. Measurements of methane production, and analysis of volatile fatty acids, ammonium and pH in the effluents were carried out. The highest methane production from co-digestion of FWS and CM was 0.400 L CH4 gVS^?1, obtained during the period with loading of 16% FWS in R2. Compared to anaerobic digestion of CM only, the methane production was increased by 100% at most, when FWS was added to the feed stock. The biogas processes failed in R1 and R2 during the periods, with loadings of 16% and 19% FWS, respectively. In both reactors, the biogas processes failed due to overloading and accumulation of ammonia and volatile fatty acids.     

Effects of bulking agent addition on odorous compounds emissions during composting of OFMSW

The effects of rice straw addition level on odorous compounds emissions in a pilot-scale organic fraction of municipal solid waste (OFMSW) composting plant were investigated. The cumulative odorous compounds emissions occurred in a descending order of 40.22, 28.71 and 27.83 mg/dry kg of OFMSW for piles with rice straw addition level at ratio of 1:10, 2:10 and 3:10 (mixing ratio of rice straw to OFMSW on a wet basis), respectively. The mixing ratio of rice straw to OFMSW had a statistically significant effect on the reduction of malodorous sulfur compounds emissions, which had no statistically significant effect on the reduction of VFAs, alcohols, aldehydes, ketones, aromatics and ammonia emissions during composting, respectively. The cumulative emissions of malodorous sulfur compounds from piles with the increasing rice straw addition level were 1.17, 1.08 and 0.88 mg/dry kg of OFMSW, respectively. The optimal mixing ratio of rice straw to OFMSW was 1:5. Using this addition level, the cumulative malodorous sulfur compounds emissions based on the organic matter degradation were the lowest during composting of OFMSW.     

Environmental,economic and social costs and benefits of a packaging waste management system: A Portuguese case study

The impact of the management of packaging waste on the environment, economic growth and job creation is analyzed in this paper. This integrated assessment intends to cover a gap in the literature for this type of studies, using the specific case study of the Portuguese packaging waste management system (SIGRE).The net environmental benefits associated with the management of packaging waste, are calculated using the Life Cycle Assessment methodology. The results show that, for the categories studied, the impacts associated to SIGRE's various activities are surpassed by the benefits associated to material and energy recovery, with special focus on recycling. For example, in 2011 SIGRE avoided the emission of 116 kt CO₂ equiv. – the equivalent carbon emission of the electricity consumption of 124.000 households in Portugal.The economic impact of SIGRE is evaluated through Input–Output Analysis. It was found that SIGRE's activities also have a significant economic impact. For example, their added value are ranked amongst the upper third of the economic activities with highest multiplier effect at national level: this means that for each Euro of value added generated within SIGRE, 1.25 additional € are added to the rest of the economy (multiplier effect of 2.25).Regarding the social impacts of SIGRE, the number of direct jobs associated with the system is estimated to be more than two thousand and three hundred workers. Out of these, 83% are connected to the management of municipal waste packaging (selective collection and sorting), 15% are connected to the management of non-municipal packaging waste and only 2% are connected to the Sociedade Ponto Verde (SPV, green dot society in English) – the management entity responsible for SIGRE.In general terms, the results obtained provide quantitative support to the EEA (2011) suggestion that moving up the waste hierarchy – from landfilling to recycling – creates jobs and boosts the economy.     

Distributed generation by energy from waste technology: A life cycle perspective

Municipal Solid Waste in general and its organic fraction in particular is a potential renewable and non-seasonal resource. In this work, a life cycle assessment has been performed to evaluate the environmental impacts of two future scenarios using biogas produced from the organic fraction of municipal solid waste (OFMSW) to supply energy to a group of dwellings, respectively comprising distributed generation using solid oxide fuel cell (SOFC) micro-CHP systems and condensing boilers. The London Borough of Greenwich is taken as the reference case study. The system is designed to assess how much energy demand can be met and what is the best way to use the digestible waste for distributed energy purposes.The system is compared with two alternative scenarios fuelled by natural gas: a reference scenario, where the electricity is supplied by the grid and the heat is supplied from condensing boilers, and a fuel cell micro-CHP system. The results show that, although OFMSW alone can only supply between 1% and 4% of the total energy demand of the Borough, a saving of ∼130 tonnes of CO₂ eq per year per dwelling equipped with micro-CHP is still achievable compared with the reference scenario. This is primarily due to the surplus electricity produced by the fuel cell when the micro-CHP unit is operated to meet the heat demand. Use of biogas to produce heat only is therefore a less desirable option compared with combined heat and power production. Further investigation is required to identify locally available feedstock other than OFMSW in order to increase the proportion of energy demand that can be met in this way.     

Fault propagation behavior study and root cause reasoning with dynamic Bayesian network based framework

The Bhopal disaster was a gas leak incident in India, considered the world's worst industrial disaster happened around process facilities. Nowadays the process facilities in petrochemical industries have becoming increasingly large and automatic. There are many risk factors with complex relationships among them. Unfortunately, some operators have poor access to abnormal situation management experience due to the lack of knowledge. However these interdependencies are seldom accounted for in current risk and safety analyses, which also belonged to the main factor causing Bhopal tragedy. Fault propagation behavior of process system is studied in this paper, and a dynamic Bayesian network based framework for root cause reasoning is proposed to deal with abnormal situation. It will help operators to fully understand the relationships among all the risk factors, identify the causes that lead to the abnormal situations, and consider all available safety measures to cope with the situation. Examples from a case study for process facilities are included to illustrate the effectiveness of the proposed approach. It also provides a method to help us do things better in the future and to make sure that another such terrible accident never happens again.     

The Ability of Landowners and Their Cooperatives to Leverage Payments Greater Than Opportunity Costs from Conservation Contracts

In negotiations over land‐right acquisitions, landowners have an informational advantage over conservation groups because they know more about the opportunity costs of conservation measures on their sites. This advantage creates the possibility that landowners will demand payments greater than the required minimum, where this minimum required payment is known as the landowner's willingness to accept (WTA). However, in recent studies of conservation costs, researchers have assumed landowners will accept conservation with minimum payments. We investigated the ability of landowners to demand payments above their WTA when a conservation group has identified multiple sites for protection. First, we estimated the maximum payment landowners could potentially demand, which is set when groups of landowners act as a cooperative. Next, through the simulation of conservation auctions, we explored the amount of money above landowners’ WTA (i.e., surplus) that conservation groups could cede to secure conservation agreements, again investigating the influence of landowner cooperatives. The simulations showed the informational advantage landowners held could make conservation investments up to 42% more expensive than suggested by the site WTAs. Moreover, all auctions resulted in landowners obtaining payments greater than their WTA; thus, it may be unrealistic to assume landowners will accept conservation contracts with minimum payments. Of particular significance for species conservation, conservation objectives focused on overall species richness, which therefore recognize site complementarity, create an incentive for landowners to form cooperatives to capture surplus. To the contrary, objectives in which sites are substitutes, such as the maximization of species occurrences, create a disincentive for cooperative formation. La Habilidad de Propietarios y Sus Cooperativas para Implementar Pagos Mayores que los Costos de Oportunidad en Contratos de Conservación