经过水泥固化的重金属废物的穿透渗漏实验

采用穿透渗漏实验方法研究了经水泥固化的重金属废物的长期渗漏行为。用由Ｐｂ＾２＋、Ｚｎ＾２＋、Ｃｕ＾２＋、Ｎｉ＾２＋和Ｃｒ＾６＋５种重金属组成的合成废物样品进行２组实验。实验研究了渗漏实验液流速、ＰＨ的变化和金属渗漏能力对固体废物长期渗漏行为的影响。     

Genotoxicity evaluation of water soil leachates by Ames test, comet assay, and preliminary Tradescantia micronucleus assay

Combining genotoxicity/mutagenicity tests and physico-chemical methodologies can be useful for determining the potential genotoxic contaminants in soil samples. The aim of our study was to evaluate the genotoxicity of soil by applying an integrated physico-chemical-biological approach. Soil samples were collected at six sampling points in a Slovenian industrial and agricultural region where contamination by heavy metals and sulphur dioxide (SO₂) are primarily caused by a nearby power plant. The in vitro alkaline version of the comet assay on water soil leachates was performed with Caco-2 and HepG2 cells. A parallel genotoxicity evaluation of the samples was performed by Ames test using Salmonella typhimurium and the Tradescantia micronucleus test. Pedological analyses, heavy metal content determination, and different physico-chemical analyses, were also performed utilizing standard methodology. Water leachates of soil samples were prepared according to standard methods. Since only a battery of biotests with prokaryotic and eukaryotic organisms or cells can accurately estimate the effects of (geno)toxicants in soil samples and water soil leachates, a combination of three bioassays, with cells or organisms belonging to different trophic levels, was used. Genotoxicity of all six water soil leachates was proven by the comet assay on both human cell lines, however no positive results were detected by bacterial assay, Ames test. The Tradescantia micronucleus assay showed increase in micronuclei formation for three samples. According to these results we can assume that the comet assay was the most sensitive assay, followed by the micronucleus test. The Ames test does not appear to be sensitive enough for water soil leachates genotoxicity evaluations where heavy metal contamination is anticipated.     

Gender differences in driver's license theory test scores in the Netherlands

INTRODUCTION: Gender differences were investigated in a sample of persons (N=34,755) who completed the driver's license theory test in the Netherlands. RESULTS: Contrary to recent findings from Sweden, no gender differences were found. IMPACT OF INDUSTRY: The present study signifies the importance of standardization in driver testing.     

某铅锌矿爆破有害效应分析及安全评估

以某铅锌矿爆破施工为背景,在现场试验的基础上,对测得的振动速度进行回归分析,得到场地爆破振动衰减规律,并结合爆破主频率,确定了周围民房的容许振动速度为2cm/s。同时,对爆破冲击波和噪声进行研究,结果表明:爆破振动、冲击波和噪声均与爆心距、炸药量有关。当爆心距相同时,噪声对建筑物和人员的影响最大,空气冲击波次之,爆破振动较小。主要从控制最大段药量和爆源距安全原则考虑,提出了防爆破振动、噪声和冲击波及飞石的安全距离。另外,还提出了硐口悬挂3层麻袋、堵塞炮泥和控制起爆网络中段间微差等安全措施,并对有害效应进行评估,其结果对后续爆破设计和施工具有实用价值和指导意义。     

Corrosion and polarization behavior of carbon steel in MEA-based CO2 capture process

This work reveals levels of corrosion rate and polarization behavior of carbon steel immersed in aqueous solutions of monoethanolamine (MEA) used in the absorption-based carbon dioxide (CO₂) capture process for greenhouse gas reduction from industrial flue gas streams. Such information was obtained from electrochemical-based corrosion experiments under a wide range of the CO₂ capture process conditions. The corrosion of carbon steel was evaluated in respect to process parameters including partial pressure of oxygen (O₂), CO₂ loading in solution, solution velocity, solution temperature, MEA concentration and metal surface condition. Results show that the aqueous MEA solution containing CO₂ provides a favorable condition for the corrosion of carbon steel to proceed. Corrosion rate is increased by all tested process parameters. These parametric effects were explained by the electrochemical kinetic data obtained from polarization curves and by the thermodynamic data obtained from Pourbaix diagram.     

Laboratory longitudinal diffusion tests: 1. Dimensionless formulations and validity of simplified solutions

To obtain reliable diffusion parameters for diffusion testing, multiple experiments should not only be cross-checked but the internal consistency of each experiment should also be verified. In the through- and in-diffusion tests with solution reservoirs, test interpretation of different phases often makes use of simplified analytical solutions. This study explores the feasibility of steady, quasi-steady, equilibrium and transient-state analyses using simplified analytical solutions with respect to (i) valid conditions for each analytical solution, (ii) potential error, and (iii) experimental time. For increased generality, a series of numerical analyses are performed using unified dimensionless parameters and the results are all related to dimensionless reservoir volume (DRV) which includes only the sorptive parameter as an unknown. This means the above factors can be investigated on the basis of the sorption properties of the testing material and/or tracer. The main findings are that steady, quasi-steady and equilibrium-state analyses are applicable when the tracer is not highly sorptive. However, quasi-steady and equilibrium-state analyses become inefficient or impractical compared to steady state analysis when the tracer is non-sorbing and material porosity is significantly low. Systematic and comprehensive reformulation of analytical models enables the comparison of experimental times between different test methods. The applicability and potential error of each test interpretation can also be studied. These can be applied in designing, performing, and interpreting diffusion experiments by deducing DRV from the available information for the target material and tracer, combined with the results of this study.     

A multi-directional tracer test in the fractured Chalk aquifer of E. Yorkshire, UK

A multi-borehole radial tracer test has been conducted in the confined Chalk aquifer of E. Yorkshire, UK. Three different tracer dyes were injected into three injection boreholes and a central borehole, 25 m from the injection boreholes, was pumped at 330 m(3)/d for 8 days. The breakthrough curves show that initial breakthrough and peak times were fairly similar for all dyes but that recoveries varied markedly from 9 to 57%. The breakthrough curves show a steep rise to a peak and long tail, typical of dual porosity aquifers. The breakthrough curves were simulated using a 1D dual porosity model. Model input parameters were constrained to acceptable ranges determined from estimations of matrix porosity and diffusion coefficient, fracture spacing, initial breakthrough times and bulk transmissivity of the aquifer. The model gave equivalent hydraulic apertures for fractures in the range 363-384 microm, dispersivities of 1 to 5 m and matrix block sizes of 6 to 9 cm. Modelling suggests that matrix block size is the primary controlling parameter for solute transport in the aquifer, particularly for recovery. The observed breakthrough curves suggest results from single injection-borehole tracer tests in the Chalk may give initial breakthrough and peak times reasonably representative of the aquifer but that recovery is highly variable and sensitive to injection and abstraction borehole location. Consideration of aquifer heterogeneity suggests that high recoveries may be indicative of a high flow pathway adjacent, but not necessarily connected, to the injection and abstraction boreholes whereas low recoveries may indicate more distributed flow through many fractures of similar aperture.     

混凝试验搅拌器的研制

影响混凝效果的因素众多,混凝沉淀烧杯试验是进行水的混合、絮凝、沉淀工艺研究、设计和生产指导的最有效方法之一,阐述了智能型混凝试验搅拌器的设计原理和技术性能.     

工作场所有害物质氮氧化物测定的质量保证

工作场所空气中产生的有毒物质氮氧化物的测定是用吸收液采集空气样品后送达实验室检测，是采样与显色同时进行，方法的关键是采样前吸收液的配制与采样后样品的运输、保存及其测定。要得到准确、可靠的监测数据，一定要从样品的采集、保存，实验室分析等各个环节加以控制。     

我国道路交通信号控制机认证框架体系探讨

针对目前我国道路交通信号控制机产品存在的质量问题,对信号机生产企业进行深入调研,详细分析信号机发展现状、国内外产品认证制度及信号机强制检测制度等,并结合我国交通信号机产品自身的特点和实际,参考国外产品认证模式、认证流程,提出我国信号机产品以型式试验、初始工厂检查和获证后监督为模式的认证框架体系。信号机产品质量认证框架体系的建立,对提高产品质量,规范行业生产,将发挥积极的促进作用,同时也为我国交通安全产品的质量控制提供了新思路。