大跨度高支模设计施工与安全

大跨度现浇钢筋混凝土建筑物中高支模设计施工是工程质量和安全的双重保证。某跨度14 m、长90 m、高10．5 m大跨度现浇钢筋混凝土建筑物屋面由10根主梁及若干井格次梁组成。以此重载荷的厂房为例,对其满堂支撑体系进行荷载设计及验算,在满足载荷力和稳定性的前提下,设计以核心支撑环节、拱卫加固卸荷支撑环节及一般支撑环节为一体的安全支撑体系,保证工程顺利完成,积累了此类设计的施工经验。     

Does Riparian Forest Restoration Thinning Enhance Biodiversity? The Ecological Importance of Large Wood

Intact riparian ecosystems are rich in biological diversity, but throughout the world, many have been degraded. Biodiversity declines, particularly of vertebrates, have led to experimental efforts to restore riparian forests by thinning young stands to accelerate creation of large diameter live trees. However, many vertebrates depend on large diameter deadwood that is standing as snags or fallen to the forest floor or fallen into streams. Therefore, we reviewed the sizes of deadwood and live trees used by different vertebrate species to understand which species are likely to benefit from different thinning treatments. We then examined how riparian thinning affects the long‐term development of both large diameter live trees and deadwood. To this end, we used a forest growth model to examine how different forest thinning intensities might affect the long‐term production and abundance of live trees and deadwood. Our results suggest that there are long‐term habitat tradeoffs associated with different thinning intensities. Species that utilize large diameter live trees will benefit most from heavy thinning, whereas species that utilize large diameter deadwood will benefit most from light or no thinning. Because far more vertebrate species utilize large deadwood rather than large live trees, allowing riparian forests to naturally develop may result in the most rapid and sustained development of structural features important to most terrestrial and aquatic vertebrates.     

Management and Limnology Interact to Drive Water Temperature Patterns in a Middle Rockies River‐Reservoir System

This study seeks to improve understanding of temperature patterns in reservoir outflows. We examined water temperatures in an irrigation storage reservoir, Island Park Reservoir, and its outflow, Henry’s Fork of the Snake River in eastern Idaho. Our objectives were to (1) quantify the extent to which daily temperature ranges in the reservoir outflow deviated from other reaches of the Henry’s Fork, and (2) test whether the reservoir’s net volume change during the summer — expressed as the volume of water remaining in the reservoir on September 1 — predicted mean summer temperature in the outflow. Two years of temperature data showed dampened diel temperature cycles in the reservoir outflow. Model selection with 17 years of climatic, hydrologic, and reservoir management variables found mean summer temperature in the outflow was best predicted by September 1 reservoir volume and average summer air temperature. Two years of weekly reservoir thermal profiles indicated large changes in reservoir volume eliminated cool hypolimnetic water and encouraged mixing, allowing warm epilimnetic water to be discharged into the outflow. Increases in future drought frequency and severity and increases in summer air temperatures could increase the frequency of occurrence of high mean summertime water temperatures in the outflow. Our study provides important information for local managers by quantifying influences on outflow temperatures and the downstream river ecosystem.     

大型复杂冲压件CAPP的发展趋势

讨论了大型复杂冲压件计算机辅助工艺设计中数值模拟技术的应用、系统模型与工艺决策等关键技术的发展 ,以及CAPP与相关系统的集成 ,分析了大型复杂冲压件计算机辅助工艺设计的发展趋势。     

2株苯胺降解的分离鉴定及其降解特性研究

从处理印染废水的活性污泥中分离得到2株苯胺降解菌,从菌落、细胞形态、生理生化及16S rRNA基因扩增测序等方面对2株菌进行了鉴定,并比较分析2株菌在好氧与缺氧条件下的苯胺降解、偶氮染料脱色及苯胺脱氨氧化酶基因tdnQ和黄素还原酶基因(fre)的携带情况.结果表明,2株菌属于Pseudomonas属和Shewanella属,分别命名为Pseudomonas sp.AN30和Shewanella sp.DN425.AN30菌株在振荡好氧条件下72h内对250mg/L苯胺的降解率为96.1%,DN425菌株的降解率为13.8%;在静置缺氧条件下AN30菌株的苯胺降解率为39.6%,DN425菌株的降解率仅为8.6%.DN425菌株在静置缺氧条件下4h内可将初始浓度为50 mg/L的偶氮染料酸性大红彻底脱色,而AN30菌株对酸性大红不具有脱色能力.以总DNA为模板,分别用tdnQ基因和fre基因特异性引物进行扩增,2株菌均能扩增出大小分别为380bp和630bp左右的目标条带,显示2菌株均携带有苯胺脱氨氧化酶基因和黄素还原酶基因.     

生物表面活性剂产生菌犁头霉菌(Absidia orchidis)的筛选及发酵条件优化

采用植物油为唯一碳源,设计选择培养基,从饭店下水道污泥中筛选出生物表面活性剂产生菌.结果分离到12株菌,其中一株能使发酵液的表面张力值从68 mN·m-1降低到34.5 mN·m-1,具有开发潜力,被选出作进一步的研究.该菌株经鉴定为犁头霉菌(Absidia orchidis).通过正交试验对犁头霉菌的培养条件进行优化,其优化培养条件为:植物油3.6 g·L-1,KH2PO412.1 g·L-1,Na2HPO45 g·L-1,(NH4)2SO4 1 g·L-1,NaNO32 g·L-1,酵母浸膏0.1 g·L-1,MgSO4·7H2O 0.15 g·L-1,NaCl 5 g·L-1,CaCl2 0.1 g·L-1,EDTA 1 g·L-1,KI 0.83μg·L-1,H3PO4 0.01μg·L-1,CoCl2·6H2O 0.048μg·L-1,MnSO4·H2O 0.312μg·L-1,Na2 MoO4·2H2O 0.048μg·L-1,ZnCl2 0.287μg·L-1,CuSO4·5H2O 0.125μg·L-1,初始pH值8,接种量6%.发酵70h时可获得生物表面活性剂的最大收获量,此时发酵液中生物表面活性剂的相对浓度达402倍.     

采用大涡PIV研究Taylor-Couette流及其对混凝过程的影响

采用大涡PIV方法对Taylor-Couette流场的湍动能及湍动能耗散率进行了估算,并利用数值模拟对其进行验证,结合絮凝实验,综合对比速度矢量、湍动能分布、湍动能耗散率分布及对应流场中混凝过程的絮体图像,探究了湍动能与湍动能耗散率对絮凝效能的影响.结果表明,大涡PIV法与数值模拟在雷诺数较高的情况下有较好的一致性,且雷诺数越大一致性越好.在Taylor-Couette涡流场中,随着雷诺数的增大,湍动能与湍动能耗散率数值不断增大,且在流场中的分布由规律有序到紊乱最终趋于各向均匀一致.而混凝过程中湍动能与湍动能耗散率的数值大小及其在流场中的空间分布情况,均对产生絮体的大小和浊度去除率有较大影响.     

虎克定律在高精度翻孔模设计中的应用与实践

以汽车摇摆臂为应用对象 ,通过对材料在翻孔过程中变形的理论分析和实际运用 ,探讨了虎克定律在高精度翻孔模设计中的应用与实践     

大型车车身覆盖件冲压成形特征分析及选材研究

为满足大型车身覆盖件冲压成形要求并实现钢板与零件的对路供应 ,必须在深入解析零件成形特征的基础上 ,确定高应变部位的成形敏感材料参数。在材料力学性能测试和成形极限分析的基础上 ,对侧围外板的冲压成形特征和成形敏感参数进行了分析。结果表明 :侧围外板零件高应变部位的变形方式为胀形 深拉延变形 ,n值和r值为影响侧围外板零件成形的主要材料敏感参数     

印尼8.7级和8.5级强震后江苏体应变同震效应分析

2004年12月26日和2005年3月29日在印尼苏门答腊北部分别发生8.7级和8.5级强烈地震后,对江苏地区前兆体应变资料进行分析发现,在这两次地震的震后都记录到了显著的异常,且异常的表现形式各不相同。本文列出这些异常并浅析,以期对进一步深入研究印尼大震对我国未来地震趋势的影响有所帮助。