应用高效离子交换色谱分析青枯菌的致病力分

应用高效离子交换色谱和激光光散射仪检测器对不同致病力的青枯菌进行分析,建立了一种快速检测青枯菌致病力分化的新方法青枯菌纯培养物经过高效离子交换色谱分离得到3个致病力不同的特征峰,大小依次为峰3组分>峰2组分>峰1组分.对10株青枯菌进行色谱分析,并结合番茄组培苗感染试验检测其致病力,结果发现,强致病力菌株经过色谱分离只在峰3的保留时间位置出现单一特征峰,在9 d内即可引起100%的番茄组培苗发病;若菌株经过色谱分离形成3个特征峰,则峰3所占的面积比越大,该菌株的致病性相对就越强.25株不同致病力青枯菌的验证试验表明了该方法的可行性,番茄组培苗发病率x与峰3面积比y之间呈现出良好的线性关系,回归方程y=0.9581x+5.4984,相关系数r=0.986.通过对青枯菌色谱行为、致病力、细胞表而黏附的EPS Ⅰ含量三者之间相互关系的进一步研究,发现青枯菌的致病力越强,则细胞表面黏附的EPSⅠ越多,峰3所占的面积比就越大.图3表6参15     

A Cost‐Effective Laser Scanning Method for Mapping Stream Channel Geometry and Roughness

This brief pilot study implements a camera‐based laser scanning system that potentially offers a viable, cost‐effective alternative to traditional terrestrial laser scanning (TLS) and LiDAR equipment. We adapted a low‐cost laser ranging system (SICK LSM111) to acquire area scans of the channel and bed for a temporarily diverted stream. The 5 m × 2 m study area was scanned at a 4 mm point spacing which resulted in a point cloud density of 5,600 points/m². A local maxima search algorithm was applied to the point cloud and a grain size distribution of the stream bed was extracted. The 84th and 90th percentiles of this distribution, which are commonly used to characterize channel roughness, were 90 mm and 109 mm, respectively. Our example shows the system can resolve both large‐scale geometry (e.g., bed slope and channel width) and small‐scale roughness elements (e.g., grain sizes between about 30 and 255 mm) in an exposed stream channel thereby providing a resolution adequate for the estimation of ecohydraulic roughness parameters such as Manning's n. While more work is necessary to refine our specific field‐deployable system's design, these initial results are promising in particular for those working on a limited or fixed budget. This opens up a realm of laser scanning applications and monitoring strategies for water resources that may not have been possible previously due to cost limitations associated with traditional TLS systems.     

Factors affecting the adoption of multiple climate‐smart agricultural practices in the Indo‐Gangetic Plains of India

Climate change poses a major threat to agricultural production and food security in India, and climate‐smart agriculture (CSA) is crucial in addressing the potential impacts. Using survey data from 1,267 farm households in 25 villages from Bihar and Haryana in the Indo‐Gangetic Plains, this study analyzes the factors that determine the probability and level of adoption of multiple CSA practices, including seeds of stress‐tolerant varieties, minimum tillage, laser land leveling, site‐specific nutrient management and crop diversification. We applied a multivariate probit model for the simultaneous multiple adoption decisions, and ordered probit models for assessing the factors affecting the level of adoption. The adoption of the various CSA practices is interrelated, whereas several factors, including household characteristics, plot characteristics, market access and major climate risks are found to affect the probability and level of CSA adoption. Climate‐smart agriculture (CSA) adoption and its intensity also vary significantly between eastern Bihar, which is relatively poor and densely populated, and north‐western Haryana. Engaging multiple stakeholders such as farmers, agricultural institutions, agricultural service providers and concerned government departments at the local level is crucial for the large‐scale uptake of CSA. The study, therefore, calls for agricultural policy reforms so that most of the issues related to the uptake of CSA can be adequately addressed.     

激光传输在环境监控中的应用设计

对将激光通信技术在环境监控中的应用进行了研究,探讨了大气环境下数据传输的信号调制方式以及提高通信距离和减少系统噪声的方法,设计了可用于环境监控数据传输的激光传输系统实用电路.经安装、调试、运行,结果表明,该妹系统在视距通信条件下应用,具有电路制作简单、设备架设灵活方便、数据传输性能稳定和传输系统成本低廉等优点.     

微区有机质激光热解GC/MS新技术及其应用

微区有机质激光热解GC/MS是国际上近年来发展起来的新分析技术。它利用激光的高相干性和高平行性准确地聚焦于有机质表面某个微小区域内 ,使之发生热降解而产生能反映有机质化学组成和结构的分子级产物 ,借助GC/MS系统进行分离和鉴定。这一新技术为生油岩和煤中单个显微有机组分的研究开辟了一条途径 ,在生油岩评价、油气源对比和油藏地球化学研究中有广泛的应用前景。     

板材激光弯曲成形数值模拟的研究现状及展望

板材的激光弯曲成形是一种利用高能激光束扫描金属板材表面产生非均匀分布的热应力 ,从而使板材发生塑性变形的金属板材柔性成形新工艺。数值模拟已逐渐成为板材激光弯曲成形研究中的热点内容。综述了近年来国内外对激光弯曲成形过程的温度场及变形场进行数值模拟的研究现状 ,并对其应用范围和发展前景作了展望     

Correction model for CO detection in the coal combustion loss process in mines based on GWO-SVM

Accurate detection of CO gas is crucial to the prevention of coal combustion. Tuneable diode laser absorption spectroscopy (TDLAS) is a reliable method for CO detection during coal combustion. The influences of temperature and pressure cause changes in the line strength and linewidth of the index gases’ absorption spectra, leading to sizable measurement errors. To correct the distortion of the CO absorption spectrum caused by temperature and pressure fluctuation, a compensation model based on the grey wolf optimizer–support vector machine (GWO–SVM) was proposed. The results were compared with those of the single SVM, the back propagation neural network (BPNN), and multiple regression analysis (MRA). MRA was revealed to result in the lowest accuracy, which indicated that MRA is not ideal for compensation in TDLAS. The hyperparameter selection of the SVM had the disadvantages of randomness and blindness, which led to instability and large errors. The BPNN achieved better correction in the training stage, but severe overfitting occurred in the testing stage. The modified results revealed that the GWO–SVM model had higher accuracy and stability than the other models. It effectively inhibited the effects of temperature and pressure on the measured concentration and greatly improved the measurement accuracy. The equipment is thus suitable for CO gas detection with the aim to preventing coal combustion loss, and it can be further applied to loss prevention in other process fields.     

制冷剂二氟甲烷热解生成氟化氢的实验研究

空调制冷剂二氟甲烷(R32)是R22的替代制冷剂之一,其分子中含有氟元素,受热可产生剧毒物质氟化氢(HF),一旦泄漏分解,将会对人员造成极大危害.首次通过实验研究了R32泄漏后的受热分解情况,利用激光气体分析仪,测量了不同工况下HF的实时浓度,分析了R32受热分解的影响因素.结果表明R32泄漏后,在受热状态下很容易产生HF,HF浓度随着泄漏量和受热状态的变化而异,浓度可达1000ppm以上;研究结果可为含氟制冷剂的应用提供技术支持.     

激光散射技术及其对絮凝剂分子特性检测和性能研究

本文提出一种将激光散射技术应用于对絮凝剂性能研究的方法。综述了利用该技术可实现对絮凝剂胶体分子粒径、形态结构、粒径分布和重均分子量的精确测量 ,论述了激光散射技术在絮凝剂沉降性能的研究及絮凝剂改进提高方面的重要作用     

pH对磷酸铵镁结晶介稳区、诱导期和反应速率的影响

以pH为控制参数,利用自组装激光测量装置测定了4、20、30和40℃时,磷酸铵镁在水溶液中的溶解度、超饱和度和介稳区宽度等基础数据,分析了不同温度和pH下磷酸铵镁结晶介稳区的变化规律,考察了pH对磷酸铵镁结晶诱导期和结晶反应速率的影响。结果表明,提高溶液的pH,可降低磷酸铵镁在水溶液中的溶解度和超饱和度,但同时磷酸铵镁结晶介稳区宽度有所增加;磷酸铵镁的溶解度和超饱和度随温度的升高呈现上升的趋势,而磷酸铵镁的结晶介稳区宽度则随温度的升高而变窄,提高溶液中MAP的物质浓度也会压缩结晶介稳区宽度;随着溶液pH的升高,磷酸铵镁的结晶诱导期逐渐缩短,同时其结晶反应速率也有明显的提升。在磷酸铵镁结晶除磷过程中,可以通过控制pH来优化反应工艺条件,促进磷酸铵镁结晶反应的进行。