RUNOFF PREDICTION USING REMOTE SENSING IMAGERY1

ABSTRACT: Percent imperviousness is an important parameter in modeling the urban rainfall-runoff process and is usually determined using manual methods such as random sampling or conventional accounting methods. In this study two computerized methods are used for estimating the percent imperviousness of urban watersheds using high altitude remote sensing imagery. These methods include the Laser Image Processing Scanner and the Video-Tape Camera system. Imperviousness is directly estimated in the former method while in the latter it is estimated as a function of the statistics of the responses on emulsions of the imagery. The percent imperviousness computed by utilizing remote sensing imagery was used with the conceptual models of rainfall-runoff models. The models were applied to four urban watersheds and the runoff prediction results indicate that imperviousness determined by using remote sensing imagery was as accurate as that obtained by the manual methods, and that the use of remote sensing imagery requires significantly less time and money.     

A new photoproduct of the drug furosemide in aqueous media

The solar phototransformation of furosemide has been investigated in aqueous media. Irradiation of the drug in distilled water, in water and humic acids or nitrate ions, and in sewage sludge water affords a new dehalogenated dimer. The formation of the dimer has been explained by the formation of a cation radical intermediate. The low-measured environmental concentration of furosemide with respect to predicted environmental concentration in the Po and Lambro Rivers could be justified by its phototransformation.     

齿轮轴修复安全性探讨

对催化装置四机组运行状态进行分析,介绍了齿轮箱高速轴及轴瓦损坏的情况,并分析说明了引起损坏的原因。结合生产实际确定合理的齿轮轴修复工艺方案,即采用激光融敷表面修复高新技术,迅速可靠地对齿轮轴进行修复,保证了设备运行的可靠性,从而实现安全生产、节能降耗、效益增长。     

PRODUCTION PROCESSES UNDER THE ICE IN LAKE ST. CLAIR: 1. IRRADIATION AND TEMPERATURE1

ABSTRACT: Data from three ice-covered stations in Lake St. Clair were collected to evaluate the effect of ice and related variables on phytoplankton production. Primary production, phytoplankton standing crop, irradiation and temperature were measured from January to April, 1973. Mean production values ranged from 0.74 mgC/m³/h at station 1 near Mitchell Bay to 3.4 mgC/m³/h in waters at stations 2 and 3 below the Thames River mouth. A similar pattern was observed in chlorophyll a concentration, the mean values ranged from 0.63 μg/1 at station 1 to 2.1 and 1.3 μg/1 at stations 2 and 3. Temperature stratification occurred at the three stations. However, the temperatures at station 1 were consistently more than a degree warmer than at the other two stations. Irradiation was low, having a mean value at the sampling depth of .075 ly/min. The data is interpreted to indicate that the ice-bound phytoplankton were adapted to the low irradiation. It is suggested that the variation observed between stations is related to the formation of a plume by the Thames River and differences in nutrient loads carried by the St. Clair and Thames Rivers.     

Synthesis, crystal structure, photodegradation kinetics and photocatalytic activity of novel photocatalyst ZnBiYO4

ZnBiYO₄ was synthesized by a solid-state reaction method for the first time. The structural and photocatalytic properties of ZnBiYO₄ were characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy and UV-Vis diffuse reflectance. ZnBiYO₄ crystallized with a tetragonal spinel structure with space group I41/A. The lattice parameters for ZnBiYO₄ were a = b = 11.176479 Å and c= 10.014323 Å. The band gap of ZnBiYO₄ was estimated to be 1.58 eV. The photocatalytic activity of ZnBiYO₄ was assessed by photodegradation of methyl orange under visible light irradiation. The results showed that ZnBiYO₄ had higher catalytic activity compared with N-doped TiO₂ under the same experimental conditions using visible light irradiation. The photocatalytic degradation of methyl orange with ZnBiYO₄ or N-doped TiO₂ as catalyst followed first-order reaction kinetics, and the first-order rate constant was 0.01575 and 0.00416 min^-1 for ZnBiYO₄ and N-doped TiO₂, respectively. After visible light irradiation for 220 min with ZnBiYO₄ as catalyst, complete removal and mineralization of methyl orange were observed. The reduction of total organic carbon, formation of inorganic products, SO₄^2- and NO₃^-, and evolution of CO₂ revealed the continuous mineralization of methyl orange during the photocatalytic process. The intermediate products were identified using liquid chromatography- mass spectrometry. The ZnBiYO₄/(visible light) photocatalysis system was found to be suitable for textile industry wastewater treatment and could be used to solve other environmental chemical pollution problems.     

高能重离子辐照下国产RPV钢A508-3的硬化行为

目的 研究在563 K的温度条件下,高能重离子辐照导致国产RPV钢A508-3的硬化行为。方法 使用回旋加速器提供的352.8 MeV Fe²¹⁺对A508-3钢试样进行辐照,使其依次达到0.15、0.30、1.50 dpa的损伤水平。借助辐照终端的梯度减能装置,在样品表面至25 μm的深度范围内产生一个准均匀分布的原子离位损伤坪区,并使用纳米压痕仪和维氏显微硬度计测量了试样的硬度。结果 考虑到压痕尺寸效应的影响,采用Nix-Gao模型对硬度数据进行拟合,由于高能Fe离子产生了较厚的损伤区,辐照试样中的软基效应明显减弱。辐照后的试样出现明显的硬化现象,且随着辐照剂量的增大,硬化增量有饱和趋势。通过辐照前和辐照至0.15 dpa试样的微硬度数据,得出其与纳米硬度之间的线性关系(Hv0=0.85 H0)。结论 借助A508-3辐照前后的硬度数据,计算发现试样的屈服强度增量与辐照剂量之间存在一种幂函数关系,这为A508-3钢中子-离子辐照硬化的映射关系研究提供了基础数据。     

小冲杆试验测定重离子辐照A508-3钢的硬化和脆化

目的采用小冲杆测试方法测量高能重离子辐照反应堆压力容器A508-3钢的辐照硬化和脆化特性,为工况条件下反应堆压力容器寿命预测提供实验依据。方法采用兰州重离子加速器提供的高能C^(6+)离子通过减能装置在290℃条件下开展A508-3钢辐照实验,并在样品表面形成一定厚度、准均匀分布的离位损伤层。通过开展不同辐照剂量辐照样品的小冲杆测试,得到不同辐照剂量A508-3钢的小冲杆载荷-位移曲线。通过对小冲杆测试得到的载荷-位移曲线的分析,测定不同辐照剂量样品的辐照硬化和脆化特性。结果压力容器A508-3钢辐照样品的硬化和脆化随着辐照剂量的增加逐渐增强,0.15 dpa以前呈线性增长,而后缓慢增大,约0.2 dpa时达到饱和趋势。结论通过小冲杆测试可以得到离子辐照样品的硬化和脆化行为,A508-3钢辐照硬化和脆化行为具有一致的变化趋势。     

毫米波近炸探测器超宽带电磁脉冲防护加固措施研究

目的 研究毫米波引信近炸探测器超宽带(Ultra-wideband,UWB)电磁脉冲防护加固措施,提高引信的电磁防护能力。方法 利用超宽带辐照试验平台,开展辐照试验,通过测试,确定受损探测器的损伤部位,明确辐照效应机理,并提出针对性加固措施。结果 超宽带电磁脉冲可使探测器出现死机或硬损伤的现象,受试探测器的效应场强阈值在50~80 kV/m。死机可在重启后恢复,而硬损伤为不可恢复现象。结论 毫米波引信近炸探测器对超宽带电磁脉冲较为敏感,锁相环回路是探测器的敏感部位。探测器暴露在辐照场下的射频电路和天线窗口是超宽带能量的主要耦合通道。采取改进元器件布局、更换器件和屏蔽线等加固措施后,探测器超宽带的防护能力有较大提升,证明了加固措施的有效性。     

脉冲激光发射模块电磁屏蔽效能仿真分析

目的 提高脉冲激光发射模块的电磁兼容性。方法 基于腔体的电磁屏蔽机理,使用HFSS软件,建立脉冲激光发射模块腔体模型,以电磁敏感度、电磁干扰2个方面对腔体电磁屏蔽效能进行仿真分析。结果 设计的双层屏蔽腔体在电磁波辐照频率为1~100 kHz时,屏蔽效能达到28 dB;电磁波辐照频率为0.2~18 GHz时,屏蔽效能达到47 dB。结论 当电磁波辐照频率在1~100 kHz时,腔体的屏蔽效能随频率的增加而增大。辐射源外部激励时,双层屏蔽腔体使用外层铁内层铜屏蔽效能较高。电磁波辐照频率在0.2～18 GHz时,腔体的屏蔽效能随频率的增大而减小,且发生了谐振效应。当腔体厚度相等时,双层屏蔽的屏蔽效能高于单层屏蔽。使用电缆连接器代替孔洞进行信号传输时,腔体屏蔽效能增加。