惰性气体抑制瓦斯爆燃火焰传播特性实验研究*

为研究惰性气体抑制瓦斯爆燃火焰传播特性,在自行搭建的中尺度爆炸激波管道上,采用数据采集系统、压电式传感器、火焰传感器、同步控制系统和激光纹影测试系统,通过对比4种不同喷射压力（0.5,1.5,2.5,3.5 MPa）的实验工况,选用N2做为惰性介质时抑制火焰的传播特性与喷射压力密切相关,火焰传播速度随着喷射压力增加呈现先增加后减弱的趋势。研究结果表明:少量N2在管道中扩散,加剧了未反应预混气体的扰动状态,造成火焰阵面褶皱的卷吸能力增强,进而加速化学反应进程,促进预混气体燃烧;喷射压力为1.5 MPa时,火焰阵面拉升、变形最强,火焰传播速度提高,最高可达到250 m/s;喷射压力为3.5 MPa时,火焰阵面出现明显三维凹陷结构,运动发生明显滞后现象,火焰传播速度大幅度降低至5.4 m/s,惰性气体抑制火焰传播效果明显。     

可调谐半导体激光吸收光谱技术用于火灾探测——初步试验

以火灾燃烧过程中产生的气体作为参数,可以大大提高火灾探测的早期性。测量气体浓度的方法有很多,可调谐半导体激光吸收光变更技术(tunable diode laser absorption spectroscopy,TD-LAS)由于其高选择性、高灵敏度和高分辨率的特点而越来越受到重视。描述了火灾特征气体CO和CO2的选取,设计了一套基于TDLAS原理的火灾探测系统,通过扣除背景噪声谱线以及对激光强度信号进行拟合,可以提高火灾探测的有效性。验证了系统对CO和CO2能够很好响应并且具有较好的线性关系,系统长时间运行稳定可靠,能够满足火灾探测的要求。     

激光诱导击穿光谱技术在环境领域中的应用动态

激光诱导击穿光谱技术是一种通过分析物质等离子体发射光谱而获取物质成分和含量的分析技术。近些年,该技术已经成为光谱学领域的研究热点且发展迅速,涌现出多种新的检测手段和仪器。从它的基本原理、发展历史及其在土壤、水和大气等生态环境保护领域的应用情况为基础,分析总结其优点以及所面临的问题和挑战。     

毫米波隐身涂层环境适应性考核与评价

为促进隐身涂层在武器装备中的应用和推广,对毫米波隐身涂层在我国海洋、酸性污染、寒冷及沙漠环境中进行了环境适应性考核与评价。通过24个月的考核,得到了该涂层外观、力学性能及隐身性能变化不大,仍保持在技术指标范围内的试验结果。同时取得了环境对毫米波隐身涂层作用影响的强弱顺序为:漠河→海南→江津→敦煌。     

Enhanced photocatalytic degradation of lindane using metal–semiconductor Zn@ZnO and ZnO/Ag nanostructures

To achieve enhanced photocatalytic activity for the degradation of lindane, we prepared metal–semiconductor composite nanoparticles (NPs). Zn@ZnO core–shell (CS) nanocomposites, calcined ZnO, and Ag-doped ZnO (ZnO/Ag) nanostructures were prepared using pulsed laser ablation in liquid, calcination, and photodeposition methods, respectively, without using surfactants or catalysts. The as-prepared catalysts were characterized by using X-ray diffraction (XRD), field-emission scanning electron microscopy, high-resolution transmission electron microscopy, ultraviolet–visible (UV–vis) spectroscopy, and photoluminescence spectroscopy. In addition, elemental analysis was performed by energy dispersive X-ray spectroscopy. The obtained XRD and morphology results indicated good dispersion of Zn and Ag NPs on the surface of the ZnO nanostructures. Investigation of the photocatalytic degradation of lindane under UV–vis irradiation showed that Zn@ZnO CS nanocomposites exhibit higher photocatalytic activity than the other prepared samples. The maximum degradation rate of lindane was 99.5% in 40 min using Zn@ZnO CS nanocomposites. The radical trapping experiments verified that the hydroxyl radical (·OH) was the main reactive species for the degradation of lindane.     

The Information Content of a Scalar Plume – A Plume Tracing Perspective

The ability of many animals and insects to track a plume to its source is a particularly impressive feat when the fluid dynamics is considered. Inspired by this observation this research seeks to identify the information in a passive scalar plume suitable for developing robust and efficient plume tracing algorithms. The subject of this study is a scalar plume emanating from a point source in a turbulent boundary layer which has been modeled in a laboratory facility built specifically for this purpose. A coupled PIV-LIF technique is used to measure the velocity and scalar field in a time resolved fashion. This data set is analyzed and the convergence rates of five single-point statistics, suitable as kernels of plume tracing algorithms, are investigated. The experimental data shows that the scalar fluctuations over long downstream distances from the source are characterized by filamentary structures that lead to relatively slow convergence rates for any statistic that is based on mean concentrations. The scalar intermittency, however, converges rapidly toward its true value, in fact converging to a testable hypothesis for source location direction faster than the time scale of the larger scale plume meander.     

激光传输在环境监控中的应用设计

对将激光通信技术在环境监控中的应用进行了研究，探讨了大气环境下数据传输的信号调制方式以及提高通信距离和减少系统噪声的方法，设计了可用于环境监控数据传输的激光传输系统实用电路。经安装、调试、运行，结果表明，该系统在视距通信条件下应用，具有电路制作简单、设备架设灵活方便、数据传输性能稳定和传输系统成本低廉等优点。     

金属板料的激光冲击成形技术

介绍了金属板料激光冲击成形技术的系统组成、成形原理、技术特点 ,以及影响板料激光冲击成形的主要因素。指出了激光冲击成形技术在工业中应用所必须研究的一些主要内容。     

多遥感设备联用在区域空气质量变化与边界层结构关系研究中的应用

为研究佛山地区空气质量变化与边界层结构的关系,2015年10-12月在佛山地区3个站点同步开展了多台风廓线雷达、激光雷达、微波辐射计联用的大气边界层结构观测实验.结果表明:风廓线雷达探测可获得平均风场垂直分布的连续变化,发现佛山地区风场垂直分层结构明显,空气污染与近地小风层厚度的相关性较强.激光雷达探测可获得颗粒物消光特性垂直分布的连续变化,发现佛山地区颗粒物消光特性与大气边界层结构有密切关系,空气质量指数(AQI)变化与颗粒物激光雷达探测反演的边界层高度相关性较高,相关系数为-0.58.微波辐射计探测可获得平均温度、相对湿度垂直分布的连续变化,逆温和相对湿度变化对边界层日变化及空气污染成因分析有较高的价值.通过多设备联合探测,可同时获得研究地区平均风场垂直分布特征、颗粒物浓度变化特征、逆温和相对湿度的变化特征.多设备联合探测,有利于区域空气质量变化与边界层结构关系机理研究,对区域空气质量变化的预测预报有重要作用.     

黄棕壤中不同粒径组分的提取分级与表征

以去离子水为分散剂,采用连续分级法,结合使用筛分、沉降、离心及错流超滤(CFF)等技术,将60目黄棕壤提取分级为细砂粒(50~250μm)、粉粒(5~50μm)、粗黏粒(1~5μm)、细黏粒(0.1~1μm)、纳米微粒(<0.1μm)5个组分;采用激光粒度仪、透射电镜(TEM)、X射线衍射(XRD)等方法对分级结果进行了表征.激光衍射粒度分析所测得各组分实际粒径分布结果与划定的粒径分级范围均很好吻合,表明按上述方法对土壤颗粒进行分级是有效、可行的.TEM观察到的纳米粒级成分呈规则球形,绝大部分颗粒粒径在20~40nm之间,有少部分大颗粒团聚体存在.