A critical review of building environmental assessment tools

Since the field of environmental assessment tools for buildings is vast, the aim of this study is to clarify that field by analysing and categorising existing tools. The differences between the tools are discussed and the current situation within the tools is critically analysed. However, the comparison of the tools is difficult, if not impossible. For example, the tools are designed for assessing different types of buildings, and they emphasise different phases of the life cycle. In addition to environmental aspects, sustainable building includes economic and social aspects. The shift from green building to sustainable building and the future requirements are challenging for building environmental assessment tools. Furthermore, the benefits of using the tools should be analysed — how the tools and their results have affected decision making?     

深圳市纯电动泥头车减污降碳协同效益评价研究

新能源汽车替代传统燃油车是减缓能源与环境压力并如期实现“双碳”目标的重要途径,但在重型车辆、工程车等领域推广较为缓慢.深圳市自2019年开始推广使用纯电动泥头车,并计划到2025年新能源环卫、泥头车数量达到8000辆.为深入探究纯电动泥头车替代柴油泥头车所产生的减污降碳协同效益,本研究基于一手调研数据,采用生命周期评价方法并结合GREET模型,对比分析了两类泥头车在燃料周期、车辆周期和配套设施周期3个周期内的能耗、主要空气污染物及碳排放情况.结果表明,纯电动泥头车全生命周期内能耗较柴油泥头车可减少36.2%,主要污染物如NO_x、SO₂、VOC和PM_2.5降幅分别达81.3%、37.8%、29.0%和25.9%;温室气体(GHGs)排放强度减少14.4%,基准情境下2030年和2050年推广纯电动泥头车GHGs累计减排量分别为71.4万t和258.5万t.尽管节能减排效果显著,但其初始购置和售后维保成本过高是制约其推广的最主要因素,通过降低车辆及电池生产制造成本、提高充换电设施数量及售后维保能力等有望加快泥头车纯电动化.     

Application of Agriculture‐Developed Demographic Analysis for the Conservation of the Hawaiian Alpine Wekiu Bug

Insects that should be considered for conservation attention are often overlooked because of a lack of data. The detailed information necessary to assess population growth, decline, and maximum range is particularly difficult to acquire for rare and cryptic species. Many of these difficulties can be overcome with the use of life table analyses and heat energy accumulation models common in agriculture. The wekiu bug (Nysius wekiuicola), endemic to the summit of one volcanic mountain in Hawaii, is a rare insect living in an environmentally sensitive alpine stone desert, where field‐based population assessments would be inefficient or potentially detrimental to natural and cultural resources. We conducted laboratory experiments with the insects by manipulating rearing temperatures of laboratory colonies and made detailed observations of habitat conditions to develop life tables representing population growth parameters and environmental models for wekiu bug phenology and demographic change. Wekiu bugs developed at temperatures only found in its environment on sunny days and required the thermal buffer found on cinder cones for growth and population increase. Wekiu bugs required approximately 3.5 months to complete one generation. The bug developed optimally from 26 to 30 °C, temperatures that are much higher than the air temperature attains in its elevational range. The developmental temperature range of the species confirmed a physiological reason why the wekiu bug is only found on cinder cones. This physiology information can help guide population monitoring and inform habitat restoration and conservation. The wekiu bug was a candidate for listing under the U.S. Endangered Species Act, and the developmental parameters we quantified were used to determine the species would not be listed as endangered or threatened. The use of developmental threshold experiments, life table analyses, and degree day modeling can directly inform otherwise unobservable habitat needs and demographic characteristics of extremely rare insects. Aplicación de Análisis Demográfico de Desarrollo Agrícola para la Conservación del Insecto Weiku Alpino Hawaiano     

Modeling the carbon dynamics of the La Grande hydroelectric complex in northern Quebec

A mechanistic semi-empirical carbon cycle model of the La Grande reservoir complex in northern Quebec, Canada was conceived in order to investigate the climate impact of such a large alteration of the continental water cycle. The model includes inputs from the drainage basin, organic matter release from flooded soils, CO₂ emissions across the water-atmosphere interface and sedimentation. Most input data stems from previous research by our group on those ecosystems. The model includes the seven reservoirs of the La Grande complex and was run for periods of 50 and 100 years. Terrigeneous dissolved, particulate and suspended soil carbon fluxes and concentrations were computed. Over 100 years, 31.3 × 10¹² g C are released from flooded soils, equivalent to 28-29% of inputs from the drainage basin. 40-74% of dissolved organic carbon is mineralized. CO₂ fluxes over 100 years are 50.5-79.8 × 10¹² g C, 46.4-67.9 × 10¹² g C more than in the absence of reservoirs. The increase in mineralization of organic matter and in CO₂ emissions is a result of the increase in cumulated water residence time due to the creation of the reservoirs. Changes in other carbon sinks and sources likely offset a part of this additional carbon flux to the atmosphere. In the first years following flooding of the reservoir, organic carbon release from flooded soils exceeds CO₂ emissions, implying the downstream export of large quantities of eroded soil organic carbon. After this initial period, CO₂ emissions are fuelled by organic carbon originating from the drainage basin.     

Effect of tracer dyes on initial deposits and persistence of bacillus thuringiensis subsp. kurstaki toxin after application of two commercial formulations onto spruce trees

Abstract

The effect of two tracer dyes [Erio Acid Red (EAR) and Acid Black 48 (AB‐48)] on initial deposits and persistence of Bacillus thuringiensis subsp. kurstaki (Btk) toxin (delta‐endotoxin) was studied after spraying two commercial formulations, Foray® 48B and Foray® 76B, over potted white spruce [Picea glauca (Moench) Voss] seedlings, at a dosage rate of 30 billion international units (BIU) per ha. Spray was applied using a spinning disc atomizer calibrated to deliver droplet sizes similar to those utilized in ultra‐low‐volume (ULV) treatments in operational insect control programs. The sprayed seedlings were left outdoors at the Sault Ste. Marie laboratory for 18 days under natural conditions of sunlight, wind and rainfall. Initial deposits and persistence of delta‐endotoxin protein in spruce foliage were determined by immunoassay [enzyme linked immunosorbent assay (ELISA)] quantification of the delta‐endotoxin. The total protein (inactive plus active) and delta‐endotoxin (active protein) concentrations in the two formulations were determined by a gravimetric procedure and by ELISA respectively.

The initial deposit levels of the toxin on foliage were not markedly affected by the addition of either of the two tracer dyes, and showed only a narrow range of 1521 to 1625 ng/g foliage (fresh weight) for Foray 48B, and 1789 to 2056 ng/g for Foray 76B. However, the persistence of the toxin was significantly influenced by the presence of the dyes. The toxin persisted in foliage only for 7 d post‐spray When the EAR dye was added to Foray 48B, compared to 10 d when no dye was added. The average half‐life (DT₅₀) of disappearance was 17.4 h for Foray 48B with EAR, and 20.9 h when no dye was present. In contrast, the situation was reversed in Foray 76B, since the duration of persistence was 10 d when EAR was added to Foray 76B, compared to 7 d when no dye was added. The average DT₅₀ was 27.9 h for Foray 76B with EAR, and 22.2 h without the dye. Persistence was the longest (14 d) when the AB‐48 dye was added to Foray 76B, and the DT₅₀ was 44.9 h.     

Leaching,mobility and persistence of tebufenozide in columns packed with forest litter and soil

Abstract

Leaching, downward mobility and persistence of tebufenozide was investigated under laboratory conditions in columns packed with forest litter and soil, after fortification with the analytical grade material (purity > 99.6%) and with two commercial formulations, RH‐5992 2F (aqueous flowable) and RH‐5992 ES (emulsion suspension). Two types of litter and soil were used: one type with relatively high amounts of sand and the other with high amounts of clay.

The concentrations eluted in the leachates were lower when the analytical material (dissolved in acetone) was used for fortification, than when the two formulations (diluted with water) were used. The amount leached was higher for RH‐5992 2F than for RH‐5992 ES. The type of substrate, i.e., sandy or clay type, had only marginal influence on the amounts eluted in the leachates. Downward movement of tebufenozide from the top 2‐cm layer to the untreated middle and bottom layers (3‐cm segments) was consistently lower when the analytical material was used for fortification, than when the two formulations were used. Downward movement was higher for RH‐5992 2F than for RH‐5992 ES. Persistence of tebufenozide in substrates, maintained under submerged conditions for 70 days after leaching, indicated an initial 2‐week lag period prior to the onset of degradation. Formulation‐related differences were observed in the half‐life (DT₅₀) values. When the analytical material was used for fortification, the DT₅₀ ranged from ca 54 to 59 d. However, when the formulations were used for fortification, the DT₅₀ showed a higher range, i.e., from ca 62 to 67 d for RH‐5992 2F and ca 70 to 80 d for RH‐5992 ES. Formulation ingredients appear to have caused enhanced adsorption of tebufenozide onto the substrates, thus delaying degradation.     

祁连山北坡自然恢复杨桦林地植物功能型组成及其影响因素

依据生活型(乔木、藤本、灌木、半灌木、多年生禾草、多年生杂类草和一二年生草本)和水分生态型(旱生、旱中生、中生和湿生)将祁连山北坡次生杨桦林28个调查样地中的81个物种划分为18种植物功能型(Plant functiontypes,PFTs),并通过典范对应分析(CCA)方法研究植物功能型与环境因子间的关系.结果表明:自然恢复杨桦林地植物功能型主要集中在中生多年生杂类草(PFTs16)、湿生多年生杂类草(PFTs23)、旱中生多年生杂类草(PFTs9)和中生灌木(PFTs18)4个植物功能型上;乔、灌、草三层冠层特征和中生植物的大量出现,反映了群落植物生活型趋于复杂化和结构化,生态型逐渐向中生化方向演替的特点;土壤容重、有机碳和全氮含量主要影响植物的生活型分异特征,土壤含水量和林冠郁闭度是植物的水分生态型分异的主要环境因子,而坡位、坡度控制着群落植物总体分布格局的形成.图1表3参31     

On the usefulness of life cycle assessment of packaging

In reaction to a paper inEnvironmental Management in which the sense and sensibility of environmental assessments of packaging were questioned, it is argued that these types of assessments may be very useful, provided the relevant types of questions are posed. These boundary conditions are discussed, along with an overview of more recent methodological developments with respect to environmental assessment of products.     

An approach for analysing the potential for material efficiency improvement

Material efficiency improvement saves energy and reduces the consumption of primary resources and reduces the volume of waste. In this article an approach for analysing the potential for material efficiency improvement is proposed and discussed. In this approach the product functions performed by the materials and various improvement measures are taken into account. The potential for material saving and associated energy saving is assessed and evaluated economically. In this paper the approach is tested in an analysis of the potential for material efficiency improvement with respect to plastic packaging in the Netherlands. The technical reduction potential is found to be 34 ± 7% (157 ± 30 ktonne virgin plastics). Realization of this potential would improve the energy efficiency of the lifecycle of plastic packaging by 31% (10 PJ in 1988). From our study we conclude that our approach can indeed be used to investigate the potential for material efficiency improvement. However, a reliable technical and particularly an economical assessment of reduction measures cannot be made until more detailed data become available.