大气环境影响评价的不确定性分析

就我国大气环境影响评价目前存在的问题进行了阐述，提出了应当正确引导和规范大气环境影响评价，发展“标准化”的计算方法和评价方法，使影响预测结果具有代表性的可比性。     

The application of life cycle assessment to design

This paper explores the practical application of life cycle assessment (LCA) to product system development. While life cycle assessment methods have been studied and demonstrated extensively over the last two decades, their application to product design and development has not been critically addressed. Many organizational and operational factors limit the integration of the three LCA components (inventory analysis, impact assessment and improvement assessment) with product development. Design of the product system can be considered a synthesis of individual decisions and choices made by the design team, which ultimately shape the system's environmental profile. The environmental goal of life cycle design is to minimize the aggregate environmental impacts associated with the product system. Appropriate environmental information must be supplied to decision makers throughout each stage of the development process to achieve this goal. LCA can serve as a source of this information, but informational requirements can vary as the design moves from its conceptual phase, where many design choices are possible, to its detailed design and implementation. Streamlined approaches and other tools, such as design checklists, are essential. The practical use of this tool in product development also depends on the nature and complexity of the product system (e.g. new vs. established), the product development cycle (time-to-market constraints), availability of technical and financial resources, and the design approach (integrated vs. serial). These factors will influence the role and scope of LCA in product development. Effective communication and evaluation of environmental information and the integration of this information with cost, performance, cultural and legal criteria will also be critical to the success of design initiatives based on the life cycle framework. An overview of several of these design initiatives will be presented.     

沉淀物和生物中U,Th和226Ra的联合测定

用放射化学法对U,Th,~(226)Ra等核素进行联合测定,国外已有不少报道,只是所用的分离方法和所测的介质不同而已。我国学者也做过一些这方面的工作。本工作建立了用三正辛胺-二甲苯萃取分离法对沉积物和生物样中U,Th和~(226)Ra的联合测定方法。 二、主要仪器与试剂     

生态农业建设中的水资源生命周期及系统功能响应

论文从生命周期角度，对原先自然环境恶劣、通过生态农业建设取得了良好效果的3个生态农业县的水资源利用进行了全过程研究。结果表明，水资源生命周期过程的进展情况受多种因素影响。目前，各生态农业县水资源生命周期过程仍处在发育的初级阶段。这一过程的完整性与系统生态、经济和社会功能的提高成正比。     

泉州湾滩涂沉积物对Cu（Ⅱ）的吸附实验

研究了Cu(Ⅱ)在泉州湾滩涂沉积物上的吸附行为。探讨了pH和温度对吸附作用的影响，测定了其吸附等温线。实验结果表明，常温下Cu(Ⅱ)在泉州湾滩涂沉积物上的吸附平衡时间约需3．5小时；吸附量随pH的升高先增大而后减少，pH=6．0左右时达最大；吸附量随温度的升高而增大；其吸附行为可以很好地用Langmuir型吸附等温线来描述。并在此基础上初步探讨了Cu(Ⅱ)在泉州湾滩涂沉积物上的吸附机理。     

广州地铁工程项目环境影响评价若干问题探讨

以广州地铁六号线环境影响评价为例，结合国内外开展地铁工程项目环境影响评价的经验，对地铁项目环境影响评价的指导思想、评价重点、工程污染再分析及环境影响预测与评价等若干问题进行了探讨，以期为国内地铁工程环境影响评价工作的开展提供一些参考。     

环境影响的经济评价方法与应用

简述了环境影响经济评价的程序。概述了环境影响货币化的3大类,共10种常用方法。运用人力资本法估算广州市大气污染引起的健康损害,损失达169 14亿元。     

On-line optical determination of floc size of Fe(Ⅲ) coagulants

This study investigated the floc aggregation, average floc size, floc size variance and floc growth velocity when ferric chloride （FeCl3） and polyferric chloride （PFC） were used to treat the simulated water samples. The factors including coagulant dose, ionic strength and solution pH, which affect the floc aggregation, were studied. Experiments were carried out in a bench-scale reactor using photometric dispersion analyzer （ PDA）. Results showed that there were great differences between the floc aggregation of PFC and FeCl3. The average floc size and fioc growth velocity of PFC were much larger than those of FeCl3. Compared with FeCl3, PFC gave a better coagulation performance in wider range of pH, dosage and ionic strength. It was also found that the coagulation efficiency of PFC did not depend on average floc size but on floc growth velocity.     

戴明循环理论在规划环评工作程序中的应用初探

通过分析现阶段我国规划环评的现状和存在的问题,结合国内外规划环评及其工作程序的研究成果,提出使用戴明循环理论对现阶段的规划环评工作程序进行改进,使程序层次化、工作细分化,增强整个规划环评工作的可操作性,使规划环评工作落实到单位和人,明确责任,减少部门间冲突.戴明循环理论的引入,提高规划环评的评价效果和效率,为规划环评提供了一个有效科学的评价方法,有助于规划环评的顺利开展,使环境问题从源头上得到控制,适应建设和谐社会的需要.     

基于3S的玉溪市土壤侵蚀敏感性评价研究

以玉溪市为研究区域，运用GIS软件对影响土壤侵蚀的因子进行叠加分析，获取玉溪市土壤侵蚀敏感性等级分布图，并与土壤侵蚀现状图加以对比，结果显示：发生土壤侵蚀的地区一定是土壤侵蚀的敏感地区，但土壤侵蚀的敏感地区不一定发生土壤侵蚀：森林覆盖量、质量和人为活动是影响土壤侵蚀的主要原因。