Fe掺杂TiO2催化剂制备及其光催化脱汞机理

采用溶胶-凝胶法制备Fe-TiO₂(Fe掺杂纳米二氧化钛)催化剂,通过XRD(X射线衍射仪)、SEM(扫描电镜)、EDX(能量色散X射线光谱仪)和UV-Vis谱对其形态、结构、组成和性质进行表征. 采用Fe-TiO₂催化剂脱除气态Hg0(元素汞),研究了该催化剂在紫外光和可见光下的脱汞效果,并考察了Fe3+的最佳掺杂比. 结果表明:在Fe-TiO₂光催化剂中,TiO₂以锐钛矿相形态存在,当Fe3+掺杂浓度〔以n(Fe)/n(Ti)计〕达到0.010时,所制备的Fe-TiO₂在紫外光和可见光下的脱汞率均达到最大,分别为54.76%和18.92%. 提出了Fe-TiO₂光催化脱汞的可能机制:Fe3+掺入TiO₂结构中,使TiO₂的导带与Fe3+的d轨道发生重叠,导致TiO₂能带变窄,从而扩展了可见光的响应范围;Fe3+在TiO₂中作为一个浅俘获阱,当其俘获光生电子以后,光生空穴能够继续扩散到TiO₂表面发生表面化学反应,生成具有强氧化性的超氧自由基O₂-和·OH,对Hg0进行氧化;当Fe3+掺杂浓度大于0.010时,由于过多的Fe3+成为了光生电子和光生空穴的俘获位,从而使俘获的电子-空穴对通过量子隧道效应复合的概率增加,同时,活性氧化物种O₂-和·OH相互消耗,抑制了光催化效率.      

Electrochemical degradation of Acid Red I dye and its treatment by UV light

Degradation of Acid Red I (ARI) dye by electrochemical treatment and UV light irradiation was studied in this work. The effect of the current density and the concentration of NaCl and dye on the decoloration and degradation efficiency were studied and optimized. The UV irradiation was monitored by UV-Vis spectrophotometry and chemical oxygen demand. The kinetic constants for decoloration and degradation were calculated. Degradation of 86% was achieved in 160?min and the first-order kinetic constant was 0.013?min^?1. Degradation products were identified by gas chromatography/mass spectrometry. The mechanism for the degradation of ARI was proposed.     

Photocatalytic degradation of ciprofloxacin in aqueous media: a short review

The frequent detection of antibiotics such as ciprofloxacin in surface and drinking waters around the world has attracted concern from various researchers. Such presence is an indication that the decontamination of water polluted by antibiotics is beyond the conventional treatment methods. However, among the different treatment methods that have been developed in the area of water purification, heterogeneous photocatalysis using semiconductor as a mediator has been rated as an efficient and a green wastewater treatment method. This is because, the process is effective in degrading and mineralizing organic pollutants, using UV or visible light. The present review paper covers a brief survey over a range of publications in the last decade, involving photocatalytic materials that have been employed in the purification of water contaminated by ciprofloxacin.     

杭州无车日大气细颗粒物化学组成形成机制及光学特性

在世界无车日期间对PM2.5化学组分、光学参数及气态污染物进行同步监测,评估机动车尾气排放对杭州市细颗粒物污染及能见度的影响.结果表明:管制期间NO2、NOx、CO和PM2.5浓度分别为45.0, 50.8, 1119, 85.8μg/m3,比平日分别下降了17.5%、23.3%、20.6%和32.6%.管制期间PM2.5中OC、EC和二次无机组分浓度为8.58, 4.29, 25.95μg/m3,比管制前下降了13.8%、12.6%和15.7%,管制后则达到20.24, 10.85, 27.39μg/m3,上升了136.0%、152.7%和5.5%.管制期间较高的NO3-/PM2.5和NOR(0.15)表明PM2.5的形成更多受二次无机转化影响,管制后PM2.5中上升的OC、EC比例和较低的NOR(0.07)则说明PM2.5主要来自机动车排放的碳质组分的贡献.硫酸盐、硝酸盐、有机气溶胶和EC是最主要的消光组分,共解释了总消光系数的74.0%~89.7%.管制后,机动车排放的有机物和EC消光比例达到26.6%和24.6%,大气消光系数则达到438.7Mm-1,比管制期间上升了60.5%,表明机动车污染排放已成为影响杭州大气细颗粒物污染和能见度下降的重要因素.     

水体中磺胺甲恶唑和甲氧苄氨嘧啶的自然光降解

实验研究了磺胺甲恶唑和甲氧苄氨嘧啶连续暴露于自然光下72 h,在pH值为4.0、7.0、9.0水体中的光降解行为,同时考察了黑暗条件下对照样品在不同pH条件下的稳定性.实验表明,光强、光照时间、水体pH都直接影响到磺胺甲恶唑的去除率.在自然光照环境下,不同pH溶液中的磺胺甲恶唑均易发生光降解,而黑暗对照样品去除率较小.甲氧苄氨嘧啶则比较稳定,几乎未发生降解,但黑暗对照样品在pH值为4.0和7.0的溶液中,与起始浓度相比,去除率大于10%,这可能主要与该药物在不同pH溶液中的离子形态及光照过程中的温度波动有关.     

碘铈共掺杂纳米TiO_2的制备及可见光光催化性能

采用溶胶凝胶法制备了不同原料比例碘铈共掺杂纳米TiO2催化剂,运用X射线光电子能谱（XPS）,X射线衍射（XRD）,透射电镜（TEM）等检测手段对催化剂进行了初步表征.结果表明,经过450℃煅烧处理得到的TiO2、铈掺杂TiO2以及碘铈共掺杂TiO2催化剂均为锐钛矿相,掺杂的Ce和I原子可能以I—Ce—O及O—Ti—I等键合方式进入TiO2晶格内部,此外,I-Ce离子共掺杂能有效降低TiO2表面的电子-空穴对的复合.以染料罗丹明B（Rhodamine B,RhB）和无色小分子水杨酸（Salicylic acid,SA）为降解的目标化合物,发现碘铈共掺杂的最佳物质的量之比为nCe∶nI∶nTi=0.04∶0.05∶1,即I0.05Ce0.04TiO2催化剂在可见光照射下（λ〉420 nm）降解目标化合物其光化学活性明显优于单掺铈的TiO2催化剂和未掺杂的TiO2.该催化反应涉及到空穴氧化,并伴有羟基自由基（.OH）、超氧自由基（O2.-）及H2O2等氧化物种的产生.     

1,10-菲啰啉-全氟辛烷磺酸(PFOS)体系共振光散射法测定痕量镉(Ⅱ)

在pH 6.8 Britton-Robinson(BR)缓冲介质中,镉(Ⅱ)与1,10-菲啰啉(Phen)作用后与全氟辛烷磺酸(PFOS)形成离子缔合物,使体系的共振光散射信号显著增强.最大散射峰位于307.0 nm处,其增强散射信号强度与镉(Ⅱ)的浓度在6.0—342.5 ng·mL-1范围内呈线性关系,据此建立了测定镉(Ⅱ)含量的共振光散射分析方法,检出限(3!)为0.6 ng·mL-1,研究了反应产物的RLS光谱特征,适宜的反应条件和影响因素,考察了共存物质的影响.该方法用于自来水和实验室废水样中镉(Ⅱ)的测定,RSD≤4.4%.     

白光散斑法原理及其发展

白光散斑法——一种较新的用于力学实验分析的方法,从其发展历程出发,简述其在40多年里的发展历史和其目前在中国国内的发展研究现状,并就其基本原理,位移信息提取的两种方法即逐点分析法和全场分析法,做了简要叙述.简单的介绍了白光散斑法的实际测量过程,并简要总结其自身独特的优势、适用的领域和其今后大体发展的趋势.图1,参27.     

Validation of Methods for Determination of Metabolic Rate in the Edholm Scale and ISO 8996

The aim of this study was to validate the Edholm scale (Edholm, 1966) and the ISO 8996 standard (International Organization for Standardization [ISO], 1990) by comparing the metabolic rates estimated for both methods with the actual measured metabolic rate (M_Meas) in 6 manual material handling tasks simulated under laboratory conditions. The metabolic rate was calculated from oxygen consumption VO₂ (19 participants) according to Standard No. ISO 8996 (ISO, 1990). Additionally, the participants estimated perceived exertion using the Borg scale. The metabolic rates derived from the Edholm scale (M_Edh) overestimated 5 of 6 activities by 34-50% (α = .05). The metabolic rates derived from ISO 8996 (M_ISO) overestimated all activities by 7-38% (α =.05).     

国外轻型车辆防翻架的设计与制作

根据在海外钻井工程服务项目HSE管理中积累的经验,介绍了国外防翻架的安全标准及其设计、选材、制作和安装要求,为中国油田服务承包商进行轻型车辆防翻架制作提供了参考。