基于GIS的页岩气开发生态环境数据管理系统设计

分析了数据管理系统在生态环境领域的应用现状,以及页岩气开发生态环境数据的特性和管理需求,提出了基于地理信息系统和关系型数据库有效集成的数据管理系统框架,实现对页岩气开发区域水环境、土壤环境、环境空气及污染源负荷在时间和空间尺度的分析与评价,指出大数据、物联网技术的运用是系统发展的重要方向.     

煤层露头自燃火灾演化规律数值模拟研究

为解决煤层露头自燃所引起的资源浪费和环境污染,以新疆台勒维丘克煤层露头为研究对象,采用数值模拟方法研究煤层露头在火风压、火风压及外部风压作用下的自燃演化规律,为治理火区和保护环境提供依据。研究表明:火风压作用下,风流最大流动速度0.729 m/s,火风压最大达到170.2 Pa;火风压与外部风压联合作用下,煤层露头动力系统是负压通风系统,在漏风速度为0.2 m/s时,研究5个典型位置的温度、氧浓度、速度及压力的变化规律;并分析孔隙率、漏风速度对煤层露头自燃火灾的影响,说明大孔隙和漏风供氧为火灾大规模发展提供有利条件。研究成果对治理火区及保护生态环境奠定坚实基础。     

关于协同推进排污许可制与环境保护税的思考

党的十九届四中全会明确提出构建以排污许可制为核心的固定污染源监管制度体系,为推动排污许可制与各项环境管理制度衔接融合及各项法规制度的协同执法指明了作战的方向。本文在剖析排污许可制与环境保护税发展现状、面临的挑战基础上,从完善法律法规体系、建立协同作战机制、建立核算复核机制、建立大数据共享机制四个方面构建排污许可制与环境保护税衔接耦合机制,使排污许可制与环境保护税叠加在协同作战中发挥出最大效能,给企事业单位明确稳定的污染排放管控要求和预期、推动形成公平规范的环境执法守法秩序,减少污染物排放、改善环境质量、强化绿色体制保障,推动形成人与自然和谐发展的现代化建设新格局。     

美国饮用水水源地保护经验及其对我国的启示

新冠肺炎疫情对公众健康造成了极大威胁。针对疫情可能造成的水污染问题,各地生态环境部门均全力加强城市和农村饮用水水源地水质监测预警工作,突出了当前形势下饮用水水源保护工作的重要性。为实现安全饮用水目标,美国在法制体系、组织结构、饮用水水源地风险评估和保护计划等方面积累了丰富的经验,为我国应对疫情、实现饮用水安全保障提供了诸多启示。美国实践经验表明,饮用水水源地保护应建立从废水排放控制到水源地风险防范的全方位、一体化管理体系;完善"从水源地到水龙头"的监测与应急体系;构建分工明确、权责清晰的制度体系;完善公众参与和信息公开,形成多方共治的良好局面。基于美国水源地保护经验,本文研究提出如下建议:加强全国饮用水水源地风险评估,严防医疗污水和城镇生活污水向水源地排放;加强水源地水质监测和预警,提升监测预警水平并制定备用水源等应急响应计划;强化地方政府对水源地的统一监管职能,明确水源地管理部门和水源地水厂的职责分工,加强组织协调和联防联控;完善公众参与和信息公开,增强公众环保意识和"主人翁"意识。     

海口市湿地保护修复经验

本文从海口湿地资源现状及特点、湿地面临威胁与问题、湿地保护修复经验等几个方面深入分析,总结了近年来海口市湿地保护修复工作的主要经验与启示,总结出"海口经验",即高位推动、顶层规划、示范带动、全民参与、合理利用,并对海口未来需要重点关注的内容提出了建议。在当今生态文明建设战略背景下,保护好人类发展的绿色基础设施——湿地,将产生巨大的生态、社会和经济效益。因此,将"海口经验"推向全国,并在全国形成示范作用,对落实湿地保护与合理利用的相关政策与制度、提高全民湿地保护意识、推动我国湿地保护管理进程具有重要意义。     

Permeability of Medical Gloves to Mono- and Dimethacrylate Monomers in Dental Restorative Materials

Dental personnel manually handle methacrylate-based restorative materials, which can cause skin irritation and allergies. The protection given by different types of medical gloves is not well known. Breakthrough time (BTT, min) was used as a measure of protection according to a European standard, using 2 test mixtures consisting of respectively 3 and 5 monomers. Fourteen gloves representing natural rubber latex, synthetic rubber, and synthetic polymeric material were tested. The BTT ranged from some minutes to more than 2 hrs for the 4 monomers with a molecular mass less than 300. The longest protection was recorded for Nitra Touch (nitrile rubber), Tactylon (synthetic rubber), and Metin (PVC).     

Hot Steam Transfer Through Heat Protective Clothing Layers

The aim of this study was to analyse the transfer of steam through different types of textile layers as a function of sample parameters such as thickness and permeability. In order to simulate the human body, a cylinder releasing defined amounts of moisture was also used. The influence of sweating on heat and mass transfer was assessed.

The results show that in general impermeable materials offer better protection against hot steam than semi-permeable ones. The transfer of steam depended on the water vapour permeability of the samples, but also on their thermal insulation and their thickness. Increasing the thickness of the samples with a spacer gave a larger increase in protection with the impermeable samples compared to semi-permeable materials. Measurements with pre-wetted samples showed a reduction in steam protection in any case. On the other hand, the measurements with a sweating cylinder showed a beneficial effect of sweating.     

Performance of Firefighters’ Protective Clothing After Heat Exposure

Heat and mechanical protection properties of 6 fabric combinations commonly used in firefighters’ protective clothing were assessed before and after different heat treatment. It was shown that after heat exposure, the values obtained were generally lower than in the original state. The mechanical properties of the materials were more affected by heat than by heat protective properties. In 2 cases, degradation started before a visible change in the material could be observed, which might be potentially dangerous for the end user who will not realize the alteration of the material.     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.     

Occupational Health and Social Resources

There is a relationship between the changes in work-related diseases and the following factors: the transformation of the organization of work, organizational development, as well as human and social changes in the work environment. These factors also influence the maintenance of industrial health and safety standards at work. Safety technology will continue to be important, but will be reduced in significance compared to the so-called soft factors, that is, all dimensions and parameters affecting people’s health and social environment at the work place.

It seems that in the future the relationship between the social resource development and work protection will become more relevant. Social resource development influences the quality of work performance and motivation, the quality of work and work protection, the likelihood of accidents and breakdowns, and the level of self-control and capacity of change.

The consequences of work protection research will be discussed in this article with a focus on the contribution of social sciences.