锂电池正极材料Li2FeS2的充放电机理与热稳定性

随着移动电子设备的飞速发展,锂电池作为新型的能源载体也取得了巨大的进步。与嵌入式氧化物正极材料相比,Li2FeS2不仅具有理想的循环性能,而且其理论容量达到400mAh／g,约为嵌入式氧化物正极材料的2倍。因此,本文从晶体结构、电化学性能、充放电机制、充放电过程中的离子电导率变化以及热稳定性等方面对Li2FeS2正极材料进行了详细的阐述。     

锂电池检测的安全标准及安全防护研究

为评估并提高锂电池在使用、储存和运输过程中的安全,本文归纳总结了国内外锂电池安全检测的相关标准,对标准中测试项目异同作了重点分析和对比,并讨论了锂电池的安全风险及风险分级情况。同时,鉴于锂电池检测过程中可能出现的起火、爆炸等危险,探讨了电池检测过程的安全防护技术,并从样品区和试验区两方面提出了安全防护要求和建议。     

太空环境下锂离子电池热失控与火灾的研究展望

综述了锂离子电池的热失控机理,介绍了由于电池内部电解液、电池隔膜和电极材料分解的链式热反应过程而引发的热失控和火灾现象。同时,讨论了锂离子电池在微重力太空环境中可能产生的烟黑浓度倍增,加速火蔓延,火焰喷射等极端火行为。进而探讨了开展锂离子电池的低压、落塔和抛物飞行等地面实验模拟太空微重力燃烧的方法可行性,建立数值模型预测太空微重力环境下锂离子电池热失控临界条件与火灾行为的必要性,以及如何通过基础研究科学地指导空间站电池热管理和消防系统的设计。     

Lead Solubilization and Accumulation by Two Strains of Pseudomonas Obtained from a Contaminated Alfisol's Effluent in Southwestern Nigeria

Two strains of Pseudomonas species (B₂ and D₅)selected from an array of lead solubilizing and accumulatingbacteria obtained from the effluent contaminated soil samples of abattery manufacturing factory were studied. Increase in pH between 4.0 and 6.0 favoured the growth of isolates: Peaklog₁₀ cfu mL^–1 values of 7.1, 7.5 and 8.5 wereobtained at pH 4, 5 and 6, respectively.Cell bound lead concentrations for B₂ (0.34 mg mL^–1)and D₅ (0.30 mg mL^–1) obtained by direct contact withPbs were greater than lead concentrations of 0.89 and 0.25 mg mL^–1 for B₂ and D₅, respectively,obtained in dialyzed cultures. These cell bound lead concentration in undialyzed cultures were alsogreater than lead concentrations of 0.03 and 0.07 mg mL^–1 for B₂ and D₅ in culture supernatants. Glucose addition did nor improve lead accumulation in the isolates.Exploitation of such isolates for the biotreatment of lead ladeneffluent was conducted.     

放电条件下锂离子电池热行为的研究

锂离子电池在生产生活中扮演着重要角色,为了对其热性能有更全面的了解,对锂离子电池放电条件下的热行为进行了探究。通过采集表面温度、电压、热释放速率等参数后对比发现,在可逆热与不可逆热的作用下,电池放电过程中存在明显的升温。此外,放电处理将导致电池出现更为明显的升温情况,更早发生热失控。最后,经过放电处理的锂电池在外加热源作用进而发生失控的实验过程中有着更剧烈的热失控行为,并最终释放较少的热量。     

基于火探管式的锂离子电池灭火技术研究

为研究锂离子电池灭火方案,基于火探管灭火技术同时利用新型清洁灭火剂Novec 1230,组装成火探管灭火系统。在灭火测试平台上以功率为200 W的电热管作为外热源引发单电池或电池模组热失控,通过改变火探管的布置位置,记录相应的灭火行为以及灭火效率,并对实验结果进行了分析。研究结果表明,当火探管灭火系统直接布置在电池正上方时,在起火后的5.6s内控制火情;随着灭火剂用量增加可以显著降低体系温度,防止电池复燃以及连锁热失控现象发生;火探管有效覆盖区域外的失控电池作为热源将继续加热临近电池,引发连锁热失控,造成灭火系统失效;根据电池热失控后的燃烧行为以及传热行为,提出相应的火探管灭火系统复合方案。     

我国废铅蓄电池产生量与再生铅产能的讨论

废铅蓄电池是再生铅主要原料,铅蓄电池产量、进出口量、社会消费保有量,以及铅蓄电池消费使用领域与废铅蓄电池产生量有关。预测2015年废铅蓄电池产生量,并讨论我国再生铅产能规模,供再生铅产业结构调整与区域布局调整作参考。     

Stand-alone wind power system with battery/supercapacitor hybrid energy storage

This paper presents a stand-alone wind power system with battery/supercapacitor hybrid energy storage. A stand-alone wind power system mainly consists of a wind turbine, a permanent magnet synchronous generator, hybrid energy storage devices based on a vanadium redox flow battery and a supercapacitor, an AC/DC converter, two bidirectional DC/DC converters, a DC/AC converter and a variable load. Several control strategies for the stand-alone wind power system are involved such as a maximum power point tracking (MPPT) control, a vanadium redox flow battery charge/discharge control and a supercapacitor charge/discharge control. The proposed MPPT control combines a sliding mode control with an extreme search control to capture maximum wind energy. This strategy avoids the necessity of measuring wind velocity, obtaining models or parameters of the wind turbine and calculating the differentials of the power generated from the wind power system and from the speed of the generator. The battery charge/discharge control maintains a constant DC bus voltage. When the battery charging/discharging current reaches the setting threshold, the charge/discharge control of the supercapacitor is triggered to limit the charging/discharging current of the battery. The simulation results show that the proposed method can rapidly respond to variations in wind velocity and load power.     

废旧手机电池的回收现状分析及对策一以泸州市为例

网络信息时代的快速发展，以移动电话手机为代表的通讯设备迅猛发展，人们换手机的频率也越来越快，因此产生了大量的废旧手机电池。为了解废旧手机电池的回收利用情况，本研究主要通过对居民就废旧手机电池的处理方式进行了调查和统计，针对泸州市废旧手机电池的处理现状，提出相应的管理措施和回收利用的对策。