基于数据库的煤矿危险源辨识系统研究

目前,煤矿大多采用的是检查项和检查内容固定的安全检查表法,为提高煤矿危险源辨识效率和准确性,遏制煤矿事故的发生,从职业安全健康管理体系角度,探讨了煤矿危险源辨识问题,并设计了以煤矿安全信息管理系统为基础的危险源辨识系统,模拟煤矿现场实际情况;依据职业安全健康管理体系中危险源管理的模式筛选出数据库中的相关信息,动态生成与之相适应的安全检查表。同时对煤矿安全信息管理系统的结构、功能以及辨识程序进行了分析。     

Applying metabolic fingerprinting to ecology: The use of Fourier-transform infrared spectroscopy for the rapid screening of plant responses to N deposition

The potential for metabolic fingerprinting via Fourier-transform infrared (FT-IR) spectroscopy to provide a novel approach for the detection of plant biochemical responses to N deposition is examined. An example of spectral analysis using shoot samples taken from an open top chamber (OTC) experiment simulating wet ammonium deposition is given. Sample preparation involved oven drying and homogenisation via mill grinding. Slurries of a consistent dilution were then prepared prior to FT-IR analysis. Spectra from control, 8 and 16 kg N ha^–1 yr^–1 treatments were then subjected to cross-validated discriminant function analysis. Ordination diagrams showed clear separation between the three N treatments examined. The potential for using Calluna vulgaris (L.) Hull as a bioindicator of N deposition is further evident from these results. The results also clearly demonstrate the power of FT-IR in discriminating between subtle phenotypic alterations in overall plant biochemistry as affected by ammonium pollution.     

烟气脱硫喷淋塔的容积负荷与本体设计

提出了以喷淋塔的容积负荷——平均容积吸收率为控制指标的本体设计路线。在目前已有的设计、运行经验基础上，根据烟气的SO2进口浓度、要求的吸收效率等来确定喷淋塔容积。讨论了容积吸收率不同角度的定义，给出了采用容积吸收率进行喷淋塔本体设计的步骤。     

ENHANCING FECAL COLIFORM TOTAL MAXIMUM DAILY LOAD MODELS THROUGH BACTERIAL SOURCE TRACKING1

ABSTRACT: Surface water impairment by fecal coliform bacteria is a water quality issue of national scope and importance. In Virginia, more than 400 stream and river segments are on the Commonwealth's 2002 303(d) list because of fecal coliform impairment. Total maximum daily loads (TMDLs) will be developed for most of these listed streams and rivers. Information regarding the major fecal coliform sources that impair surface water quality would enhance the development of effective watershed models and improve TMDLs. Bacterial source tracking (BST) is a recently developed technology for identifying the sources of fecal coliform bacteria and it may be helpful in generating improved TMDLs. Bacterial source tracking was performed, watershed models were developed, and TMDLs were prepared for three streams (Accotink Creek, Christians Creek, and Blacks Run) on Virginia's 303(d) list of impaired waters. Quality assurance of the BST work suggests that these data adequately describe the bacteria sources that are impairing these streams. Initial comparison of simulated bacterial sources with the observed BST data indicated that the fecal coliform sources were represented inaccurately in the initial model simulation. Revised model simulations (based on BST data) appeared to provide a better representation of the sources of fecal coliform bacteria in these three streams. The coupled approach of incorporating BST data into the fecal coliform transport model appears to reduce model uncertainty and should result in an improved TMDL.     

煤矿安全预评价的未确知测度模型及应用

矿井自然灾害的安全预评价涉及不确定因素众多.本文根据未确知数学理论,建立了预评价指标体系、置信度识别准则及评分准则,构造了矿井安全预评价未确知测度模型,并对矿井的各个安全指标进行了定量分析.用上述方法对黄陵二号井自然灾害的评定结果与实际耦合较好,从而为煤矿建设项目的安全预评价开辟了一条新途径.     

陆上石油勘探开发企业危害辨识与风险控制浅析

本文针对陆上石油勘探开发企业作业过程中存在的主要风险,分析了各作业环节包括的主要危害因素,提出风险控制的方法,以确保有效控制石油勘探开发作业过程中的各类风险.     

城镇供热管道隐患辨识研究

近年来,因供热管道老化腐蚀、外部自然环境、施工活动等导致的事故时有发生,给居民的冬季供暖造成了严重的危害和影响。本文在分析供热管道自身安全特性的基础上,运用事故树等系统安全分析方法对供热管道隐患进行辨识分析,结合供热管道影响因素明确隐患辨识重点,并针对隐患排查内容及手段等提出对策建议,以支撑供热管道单位更系统、更科学的开展隐患排查治理工作,保障管线的安全运行。     

State of research on the automation of HAZOP studies

For more than 30 years, multiple research groups have worked on the automation of hazard and operability (HAZOP) studies, or more specifically on the hazard identification process. So far, very few of these approaches have been used in the chemical process industry. Automatic hazard identification is a knowledge-intensive process that demands high standards with regard to the way in which knowledge is stored and made available. There are various suitable approaches to the qualitative modeling of processes and plants, which are the foundation for reasoning systems that are used for the identification of hazards. Additionally, there are quantitative methods that are based on process simulations and can be used to identify potential hazards. The investigation of the state of research demonstrates that there are sophisticated technologies for automated systems that include powerful reasoning techniques. The benefits and shortcomings of existing technologies are discussed with regard to their industrial applicability. Often, the quality of the necessary specific and generic knowledge is not sufficient to detect potential hazardous events and operational malfunctions. Computer-aided HAZOP systems should be integrated with computer-aided design- or process simulation software using common data models based on the digital representation of the process plant. In order to be used by HAZOP practitioners automated systems need to be comprehensive, serve as specialized decision support systems, and be tested and evaluated using round robin tests.     

某型机车牵引电机传动端轴承低速轻载无飞溅润滑试验研究

主要根据客户要求,在低速(1 km/h)及轻载工况下,测量传动端轴承无飞溅润滑条件下的温升等参数,而进行相关的电机试验,为某型机车牵引电机传动端轴承在低速及轻载工况下,无飞溅润滑提供试验验证及技术支撑。     

Targeted Application of Seasonal Load Duration Curves Using Multivariate Analysis in Two Watersheds Flowing Into Lake Houston1

Teague, Aarin, Philip B. Bedient, and Birnur Guven, 2011. Targeted Application of Seasonal Load Duration Curves Using Multivariate Analysis in Two Watersheds Flowing Into Lake Houston. Journal of the American Water Resources Association (JAWRA) 47(3):620‐634. DOI: 10.1111/j.1752‐1688.2011.00529.x Abstract: Water quality is a problem in Lake Houston, the primary source of drinking water for the City of Houston, Texas, due to pollutant loads coming from the influent watersheds, including Spring Creek and Cypress Creek. Statistical analysis of the historic water quality data was developed to understand the source characterization and seasonality of the watershed. Multivariate analysis including principal component, cluster, and discriminant analysis provided a custom seasonal assessment of the watersheds so that loading curves may be targeted for season specific pollutant source characterization. The load duration curves have been analyzed using data collected by the U.S. Geologic Survey with corresponding City of Houston water quality data at the sites to characterize the behavior of the pollutant sources and watersheds. Custom seasons were determined for Spring Creek and Cypress Creek watersheds and pollutant source characterization compared between the seasons and watersheds.