汽车涂装废水处理系统的优化

通过对重庆某汽车制造厂涂装车间原废水处理工艺运行状况的调查 ,分析出该废水处理运行中存在的主要问题是 :废水水量与水质很不稳定 ;相同的处理方法加大了对不同废水的处理难度 ;设备腐蚀较为严重。改造后的处理工艺 ,对不同的废水先进行不同的物化处理 ,然后进入SBR反应器进一步进行生化处理 ,并且在设备的预制时就采取了一系列的防腐措施 ,很好地解决了原处理工艺中存在的问题。     

尿素添加剂湿法烟气同时脱硫脱氮工艺实验研究(Ⅱ)

对EA和PA两种添加剂,工艺条件变化对NOx脱除率影响有相同的规律：NOx脱除率不受烟气的浓度变化影响;随烟气的氧化度和吸收反应塔有效高度的增加而迅速增加。对吸收反应温度、尿素和添加剂质量分数、吸收塔有效高度进行正交实验得出最佳工艺条件为：吸收反应温度70℃;吸收塔有效高度1．8m;尿素和添加剂质量分数分别为10％和0．01％。在最佳工艺条件作验证实验得出结果与正交实验得出的结果基本符合,此时SO2脱除率为100%,NOx脱除率大于75％。     

基于响应面法的煤矿钻孔随钻超声成像仪器受力部件优化设计*

摘要:为研制适用于煤矿瓦斯抽采钻孔、满足施工强度要求的小尺寸随钻超声成像仪器，对随钻超声成像仪器的关键受力部位——超声探头安装孔进行优化设计，分析煤矿瓦斯抽采钻孔的一般规格，建立超声探头安装孔的三维模型，确定关键参数类型及其取值范围，采用极差分析法找到对受力部件强度影响较大的参数，基于响应面法开展有限元数值模拟，运用Box-Behnken设计方法得到超声探头安装孔关键参数与仪器受力部件性能指标的关系，优化受力部件关键参数的数值。结果表明:优化前最大的等效应力为138.6 MPa，优化后受力部件最大等效应力较优化前降低9.05%。结论验证了设计方法的有效性，为煤矿抽采钻孔随钻测井仪器的研制提供思路。     

Governing climate change in Dutch cities: anchoring local climate strategies in organisation,policy and practical implementation

Although Dutch cities were among the forerunners in local climate policy, a systematic overview on climate mitigation and adaptation policy is still missing. This study aims to fill this gap by analysing 25 Dutch cities using indicators for the level of anchoring in policy, organisation and practical implementation as well as multi-level relations. Since Tilburg, Amsterdam, Den Haag and Rotterdam show a higher performance than other Dutch cities, these four cities are used as reference cities. The findings suggest that structural integration of climate mitigation and adaptation is limited in Dutch cities. The study points at three recent trends in local climate governance in the Netherlands: (i) decentralisation within municipal organisations, (ii) externalisation initiatives that place climate policy outside the municipal organisation and (iii) regionalisation with neighbouring municipalities and the provincial government.     

Accounting for enforcement costs in the spatial allocation of marine zones

Marine fish stocks are in many cases extracted above sustainable levels, but they may be protected through restricted‐use zoning systems. The effectiveness of these systems typically depends on support from coastal fishing communities. High management costs including those of enforcement may, however, deter fishers from supporting marine management. We incorporated enforcement costs into a spatial optimization model that identified how conservation targets can be met while maximizing fishers’ revenue. Our model identified the optimal allocation of the study area among different zones: no‐take, territorial user rights for fisheries (TURFs), or open access. The analysis demonstrated that enforcing no‐take and TURF zones incurs a cost, but results in higher species abundance by preventing poaching and overfishing. We analyzed how different enforcement scenarios affected fishers’ revenue. Fisher revenue was approximately 50% higher when territorial user rights were enforced than when they were not. The model preferentially allocated area to the enforced‐TURF zone over other zones, demonstrating that the financial benefits of enforcement (derived from higher species abundance) exceeded the costs. These findings were robust to increases in enforcement costs but sensitive to changes in species’ market price. We also found that revenue under the existing zoning regime in the study area was 13–30% lower than under an optimal solution. Our results highlight the importance of accounting for both the benefits and costs of enforcement in marine conservation, particularly when incurred by fishers. Justificación de los Costos de Aplicación en la Asignación Espacial de Zonas Marinas     

Leaching assessment of concrete made of recycled coarse aggregate: Physical and environmental characterisation of aggregates and hardened concrete

Each year, millions of tonnes of waste are generated worldwide, partially through the construction and demolition of buildings. Recycling the resulting waste could reduce the amount of materials that need to be manufactured. Accordingly, the present work has analysed the potential reuse of construction waste in concrete manufacturing by replacing the natural aggregate with recycled concrete coarse aggregate.However, incorporating alternative materials in concrete manufacturing may increase the pollutant potential of the product, presenting an environmental risk via ground water contamination.The present work has tested two types of concrete batches that were manufactured with different replacement percentages. The experimental procedure analyses not only the effect of the portion of recycled aggregate on the physical properties of concrete but also on the leaching behaviour as indicative of the contamination degree. Thus, parameters such as slump, density, porosity and absorption of hardened concrete, were studied. Leaching behaviour was evaluated based on the availability test performed to three aggregates (raw materials of the concrete batches) and on the diffusion test performed to all concrete.From an environmental point of view, the question of whether the cumulative amount of heavy metals that are released by diffusion reaches the availability threshold was answered. The analysis of concentration levels allowed the establishment of different groups of metals according to the observed behaviour, the analysis of the role of pH and the identification of the main release mechanisms. Finally, through a statistical analysis, physical parameters and diffusion data were interrelated. It allowed estimating the relevance of porosity, density and absorption of hardened concrete on diffusion release of the metals in study.     

Building robust conservation plans

Systematic conservation planning optimizes trade‐offs between biodiversity conservation and human activities by accounting for socioeconomic costs while aiming to achieve prescribed conservation objectives. However, the most cost‐efficient conservation plan can be very dissimilar to any other plan achieving the set of conservation objectives. This is problematic under conditions of implementation uncertainty (e.g., if all or part of the plan becomes unattainable). We determined through simulations of parallel implementation of conservation plans and habitat loss the conditions under which optimal plans have limited chances of implementation and where implementation attempts would fail to meet objectives. We then devised a new, flexible method for identifying conservation priorities and scheduling conservation actions. This method entails generating a number of alternative plans, calculating the similarity in site composition among all plans, and selecting the plan with the highest density of neighboring plans in similarity space. We compared our method with the classic method that maximizes cost efficiency with synthetic and real data sets. When implementation was uncertain—a common reality—our method provided higher likelihood of achieving conservation targets. We found that χ, a measure of the shortfall in objectives achieved by a conservation plan if the plan could not be implemented entirely, was the main factor determining the relative performance of a flexibility enhanced approach to conservation prioritization. Our findings should help planning authorities prioritize conservation efforts in the face of uncertainty about future condition and availability of sites.     

The convergence of alternative food networks within “rural development” initiatives: the case of the New Rural Reconstruction Movement in China†

Rural sociologists and geographers have conceptualised different rural development trajectories including “the agri-industrial model”, “the post-productivist model” and “the rural development model”. Alternative food networks (AFNs) are increasingly recognised as a “forerunner” and a critical component of the emerging “rural development model” in the West. Meanwhile, Marsden and Franklin [2013. Replacing neoliberalism: theoretical implications of the rise of local food movements. Local Environment, 18 (5), 636–641] pointed out that there is a “local trap” in the current conceptualisation of AFNs that overemphasises their local embeddedness and heterogeneity. This “local trap” marginalises AFNs and, therefore, hinders their potential for transforming the industrialised conventional food system. The convergence and scaling-up of fragmented AFNs have been recognised as important ways to address this marginalisation issue and thus have attracted considerable attention. However, current studies of the convergence of AFNs focus mainly on the role of food-centred organisations without recognising the role of the emerging “rural development” initiatives in the convergence of AFNs. Based on in-depth interviews with key stakeholders and analysis of secondary data, this paper uses the New Rural Reconstruction Movement (NRRM), an emerging alternative rural development movement in China, as an example to illustrate how the NRRM opens up a novel space for the convergence of AFNs. We argue that the interrelationship between AFNs and rural development is indeed reciprocal. The NRRM, following the “rural development” trajectory, functions as a hub for the convergence and scaling-up of various alternative food initiatives. Strategies for achieving convergence include constructing a “common ground” for these initiatives, establishing national alliances and organisations, sharing knowledge and exchanging personnel among them.     

Optimizing conservation in species-specific agricultural landscapes

Recovery of grassland birds in agricultural landscapes is a global imperative. Agricultural landscapes are complex, and the value of resource patches may vary substantially among species. The spatial extent at which landscape features affect populations (i.e., scale of effect) may also differ among species. There is a need for regional-scale conservation planning that considers landscape-scale and species-specific responses of grassland birds to environmental change. We developed a spatially explicit approach to optimizing grassland conservation in the context of species-specific landscapes and prioritization of species recovery and applied it to a conservation program in Kentucky (USA). We used a hierarchical distance-sampling model with an embedded scale of effect predictor to estimate the relationship between landscape structure and abundance of eastern meadowlarks (Sturnella magna), field sparrows (Spizella pusilla), and northern bobwhites (Colinus virginianus). We used a novel spatially explicit optimization procedure rooted in multi-attribute utility theory to design alternative conservation strategies (e.g., prioritize only northern bobwhite recovery or assign equal weight to each species’ recovery). Eastern meadowlarks and field sparrows were more likely to respond to landscape-scale resource patch adjacencies than landscape-scale patch densities. Northern bobwhite responded to both landscape-scale resource patch adjacencies and densities and responded strongly to increased grassland density. Effects of landscape features on local abundance decreased as distance increased and had negligible influence at 0.8 km for eastern meadowlarks (0.7–1.2 km 95% Bayesian credibility intervals [BCI]), 2.5 km for field sparrows (1.5–5.8 km 95% BCI), and 8.4 km for bobwhite (6.4–26 km 95% BCI). Northern bobwhites were predicted to benefit greatly from future grassland conservation regardless of conservation priorities, but eastern meadowlark and field sparrow were not. Our results suggest similar species can respond differently to broad-scale conservation practices because of species-specific, distance-dependent relationships with landscape structure. Our framework is quantitative, conceptually simple, customizable, and predictive and can be used to optimize conservation in heterogeneous ecosystems while considering landscape-scale processes and explicit prioritization of species recovery.     

基于时间序列MODIS数据的贵州省森林物候地域分异

森林物候是气候与环境变化的重要指示器,对于陆地植被生态环境监测具有重要的意义。以2011～2013年的MODIS NDVI(归一化植被指数)为时间序列数据,采用Savizky-Golay(S-G)滤波平滑和动态阀值法,提取出贵州省2012年森林物候的生长起始日期(SOS)、生长结束日期(EOS)、生长季长度(LOS)和生长季振幅(AOS)4个参数,分别将提取的森林物候参数与经度、纬度和海拔做相关性分析。研究结果显示:(1)贵州省森林物候参数与纬度相关性整体较弱,因此贵州省森林物候纬度地带性地域分异的不显著;(2)贵州省森林物候生长起始期、生长季长度与经度呈极显著相关,而森林物候生长结束期与经度呈低度相关,整体上贵州省森林物候参数海陆(经度)地带性地域分异显著;(3)贵州省森林物候生长起始期、生长结束期与海拔呈显著相关,而森林物候生长季长度与海拔呈极显著相关,因此贵州省森林物候参数垂直(海拔)地带性地域分异的十分显著。