微生物对沉积物主要化学组分吸附重金属能力的影响

通过松花江水中微生物与铁、锰氧化物和腐殖酸形成的复合物质的比表面积及吸附Pb、Cd能力的分析,探讨微生物对沉积物中主要化学组分理化性质的影响及机理.结果表明:锰氧化物的比表面积大于铁氧化物和腐殖酸,与微生物结合后比表面积均不同程度增加. 固体物质的比表面积与吸附Pb和Cd的能力并不完全一致,与它们对重金属的吸附机制不同有关.复合物质的的吸附能力并不符合加和模型,微生物的存在掩盖了铁、锰氧化物和腐殖酸表面部分官能团,造成了复合物质的吸附量小于各组分的吸附量之和.     

Speciation of heavy metals in Albanian coastal sediments

This article presents results on heavy metal (Fe, Mn, Cr, Ni, Cu, Cd, Pb and Zn) speciation in the coastal sediments of Albania. Sediment samples were collected within the framework of the activities of the Interreg Italia–Albania Project, carried out in the Southern Adriatic Sea in 2000–01. This study shows that Albanian coastal sediments are highly influenced by river input, as the decreasing concentrations from coast to offshore confirm. Pb represents an exception of the general trend; meteoric inputs are prevalent for this metal. Ni, Cr, Fe, Zn and Cu correlate significantly and positively in the entire area, indicating a common origin for these metals in the analyzed sediments. All metals result mostly associated to the most refractory phases, which constitute up to 80% of the total concentration. Nevertheless a recent input of Cr, Ni, Cu and Mn can be observed, as the result of mining and industrial activities, in some selected areas, such as the Drin Bay and Durres. Their high concentration in the bioavailable phase can determine toxic effect upon biota.     

The status of heavy metal levels in a Ramsar site,Kuala Gula bird sanctuary: the impact of the anthropogenic inputs

Distributions of Cd, Cu, Pb, and Zn in the surface sediments from two sites of the Kuala Gula Bird Sanctuary, Malaysia were monitored for a period of 6 months from October 2006 to March 2007. In December 2006, the concentration of Zn in one location was significantly (p??1) than the other metals at both sites, but in the oxidizable organic fraction it was highest at both sites during October; with mean concentrations of 18?mg?kg^?1 at both locations. In the acid-reducible fraction, high concentrations of Pb (2.3?mg?kg^?1) were detected at station 2 in February 2007, being highest among all four metals at both stations. The acid-reducible fraction found in Pb ranged from 0.10% to 3.1% in both stations. Percentages ranging from 51% to 96% were observed for all four metals in the resistant fraction throughout the sampling period. These results indicate low contributions from anthropogenic sources. The findings constitute a baseline data archive for future reference.     

Heavy metals in coastal sediments in Guipuzcoa (Spain)∗

Surficial sediment samples were wet digested (HNO₃‐HCI‐HF) and analysed by atomic absorption spectroscopy. The background values in the area, and the Pollution Index Load in the sampling points were calculated. Metal inputs of continental origin are specially important in Deva, Oria and Urola river mouths.     

Arsenic species in the well water and sediments of the blackfoot disease area in Taiwan

The blackfoot disease (BFD) observed in southwestern Taiwan is due to drinking high arsenic concentrations in well water. This paper presents some results concerning the distributions of arsenic species in water and sediments collected in the BFD (well, river and coastal) area and the background (lake and ocean) area for comparison. The results show that the concentrations of arsenate (870 ± 26 ug/L) and arsenite (70.2 ± 2.6 ug/ L) in well waters, and the contents of arsenic (1640 ug/g) with high percentage of easily reducible (Fe and Mn oxides, 91.7%) and exchangeable and carbonate (4.6%) phases in well sediments were much higher than those in river, lake and coastal samples. Low arsenic (3.46–31.8 ug/g) with high percentages (73.8–97.3%) of detritus and minerals phase with low percentages (0.4–9.8%) of total carbonate and exchangeable phases were found in the river and coastal samples in the BFD area as well as the lake and ocean samples in background area. It might suggest that the higher concentrations of toxic As(III) in well water and arsenic with higher values of easily reducible, carbonate and exchangeable phases in the well sediments, combined with the higher values of dissolved organic carbon, humic and fulvic acids and aromatic carbon as well as the higher fluorescence indensity in the well water are the key factors to cause the BFD in Taiwan.     

Factors affecting the distribution of trace elements in harbour sediments

A large number of data (n=488) were acquired from 2003 to 2006 for five Italian harbours and three control areas to determine trace element (Al, As, Cd, Cu, Zn, Pb, Hg, Cr, and Ni) levels in sediments. Results were utilised to evaluate, on a multivariate statistical basis, pollution levels, significant relationships between observed levels and specific factors, and enrichment factors. Of the factors tested, main human use of harbour, was best able to determine segregations in the observed trace element fingerprints. Compared with the concentration limit approach, the evaluation of enrichment factors, even if affected by mathematical approximations, represented a useful tool for environmental studies, allowing evaluation of the presence of sediments enriched by human activities and reducing the occurrence of both false positives and false negatives due to natural differences in aluminosilicate levels.     

Geochemical forms of trace metals in mangrove sediments—Red Sea (Egypt)

Seven sediment samples from mangrove sediments of the Red Sea were taken in order to evaluate the possible contamination of the sediments by trace metals (iron (Fe), manganese (Mn), zinc (Zn), copper (Cu), lead (Pb) and cadmium (Cd)). Sequential extraction techniques were performed to study the different geochemical forms of these metals. X-ray diffraction analysis has been performed to correlate the mineralogical composition with the geochemical forms of the studied elements. The results of Fe and Mn contents indicate that they are in large part from lithogenous origin. The elevated concentrations are associated with the residual form ranged from 70 to 93% for Fe and 46 to 70% for Mn. The percentage of Zn, Cu, Cd and Pb in the non-residual form was much greater than that of the residual fractions. This reflects the high mobility and bioavailability of these metals in mangrove sediments of the Red Sea. X-ray diffraction analysis revealed the presence of silicate components including quartz, feldspars and clay minerals in some locality. Non-silicate components recorded in the study area as calcite as well as, Mg-calcite. Quantitatively both components i.e. silicate and carbonate varied according to their source material.     

Estimation of Similarity in the Qualitative Composition of Humic Substance in Marine Sediments By Means of an Uv-Spectroscopic Library

In this paper a method for the study of the qualitative similarity of extractable humic substance (EHS) in marine sediments based on the realisation of UV spectral library of EHS is described. the spectral library was built including the digitised spectra of humic substance extracted from several marine sediments (46 samples) and two samples of standard materials (lignin sulphonate and humic substance) in a Statistica data file. the data matrix was elaborated by means of different multivariate statistic techniques such as Cluster Analysis (CA), Principal Components Analysis (PCA) and the univariate technique Spectral Correlation Analysis (SCA). This approach allows us to show the contribution of different organic compounds (aromatic, lipid and acid) to the composition of EHS and moreover it evidences also the structural characteristics of EHS in terms of similarities in the qualitative composition of samples such as presence of terrestrial and/or vegetal contributions. the UV library is an objective tool to study the qualitative composition of EHS and it represents a complementary approach to the most common methods based on the application of spectroscopic (IR, ¹³CNMR), potentiometric and chromatographic techniques.     

Impact of heavy metals of industrial plant wastewater on benthic communities of Bizerte Lagoon (Tunisia)

ABSTRACT

The aim of this study was to assess the consequences of human impact on the characteristics of sediments heavy metal concentration, grain size and its influence on the structure of the microbial and meiofaunal community assemblages. A survey was carried out in July 2013 within six sites located in the Bizerte Lagoon (Tunisia), both downstream and upstream of industrial effluents. The highest total sediment metal concentrations were detected in stations located close to the industrial sewage discharge points. In these stations, the lowest densities of the total meiofauna (33?±?13?ind/10?cm^?2) and conversely the highest densities of cultivable bacteria that are heavy metal resistant have been reported (16?±?80.34?CFU?g^?1). Univariate (ANOVA) and multivariate (MDS/CCA) analyses demonstrate high dissimilarity (0.06) in meiofaunal and bacterial community structures between downstream and upstream industrial sewages. Furthermore, canonical correspondence analysis CCA results indicated that heavy metal sediment contamination promoted bacteria that are resistant to heavy metals, while heterotrophic bacteria supported the development of meiofauna taxa. The results highlight the importance of bacteria/meiofauna interactions, as both meiofaunal and microbial communities give indications of the ecological impact of heavy metal contamination in sediment.     

Spatial distribution of copper in relation to recreational boating in a California shallow-water basin

The overall effect of the number of boats on the copper (Cu) levels in the water column and sediment, along with their spatial variability within Shelter Island Yacht Basin (SIYB), San Diego Bay, California was examined. We identified a horizontal gradient of increasing dissolved Cu and Cu in sediment from outside to the head of SIYB which was coincident with the increasing number of boats. Spatial models of Cu distribution in water and sediment indicated the presence of ‘hotspots’ of Cu concentration. From outside to the head of SIYB, dissolved Cu ranged from 1.3 μ g L^?1 to 14.6 μ g L^?1 in surface water, and 2.0 μ g L^?1 to 10.2 μ g L^?1 in bottom water. Cu in sediment exceeded the Effect Range Low of 34 mg kg^?1 (i.e. where adverse effects to fauna may occur), with a peak concentration of 442 mg kg^?1 at the head of the basin. Free Cu⁺⁺ in surface water was several orders of magnitude higher than in sediment porewater. High-resolution data of Cu species together with probability maps presented in this paper will allow managers to easily visualise and localise areas of impaired quality and to prioritise which areas should be targeted to improve Cu-related conditions.