低COD浓度废水启动EGSB反应器

以厌氧活性污泥和好氧活性污泥接种于2个膨胀颗粒污泥床(EGSB)反应器中,进水流量为10 mL/min,回流量为180 mL/min,进水COD浓度在180 mg/L左右,有机负荷率(OLR)为1.728 kg COD/m3·d左右,污泥负荷率(SLR)为0.19 kg COD/kg MLSS·d左右,出水COD浓度维持在40mg/L左右,COD去除率达80%以上.控制温度在32～35 ℃,pH在6.8～7.2,反应器内氧化还原电位在-340 mV以下,水力停留时间(HRT)4.2 h,上升流速4.86 m/h以及加入80 mg/L絮凝剂(硫酸铝钾),缩短了启动时间,促进了颗粒污泥的形成.分别经过60 d和120 d运行,反应器启动成功.结果表明,上升流速、絮凝剂和污泥类型对颗粒污泥的形成有影响;接种好氧活性污泥在低浓度COD下,合理控制负荷速率能成功启动EGSB反应器.     

中国企业社会责任财务绩效评价模型研究

2003年,英国政府出台了<我们能源的未来-创建低碳经济>能源白皮书,其中首次引入了"低碳经济"的概念,随后越来越多的学者开始探讨这种经济发展模式及其技术和政策的可行性,并展开了一系列实证研究.而在这种新的经济发展趋势下,作为经济主体的企业所要承担的社会责任也就被赋予了新的内窖.那么在向低碳经济转型的过程中,如何对企业的社会责任进行客观、有效的评价将对于企业更好履行其社会责任起到重要作用.基于我国国情,本文通过对低碳经济发展模式下中国企业社会责任财务绩效进行模型研究,提出了在传统指标分析模型基础上进行数据包络分析(DEA)和可持续计量的双重模型修正,以期弥补传统财务绩效模型在企业有效投入分析和动态性评价方面的缺陷和不足.     

智能家电的低待机功耗研究

从智能家电待机工作状态入手,分析电器产品中参与待机工作的各部分电路原理,提出降低潜在功耗设计思路和计算方法,从家电设计研发阶段对待机功耗进行控制,同时对待机功耗精确测量方法关键点进行解读以控制低功耗测试不确定度,有助于低待机功耗设计和测量的标准化和规范化。     

未来30a凉山州水稻盛夏低温危害风险分析

根据(BCC)气候系统模式第五阶段试验计划(CMIP5-RCP6.0)预测的2006~2050年各格点逐日平均温度,通过订正反演出2021~2050年凉山州各站点逐日平均温度,结合凉山州不同区域水稻抽穗杨花期低温指标,统计了各站水稻盛夏低温频次、水稻安全播种期、安全齐穗期以及安全生长季差,构建了水稻盛夏低温危害风险指数I=exp(Id+ip-2),并以此进行低温危害风险的区域划分,结果表明:(1)凉山州水稻盛夏低温频次为0.1~3.0次/a,在区域和年际之间差异很大;(2)与近30a比较,凉山州水稻安全播种期普遍提前10 d左右,提前最多的达20 d以上。安全齐穗期只有少数站点推迟,大多数站点都有提前的趋势;(3)海拔1 500 m以下为无风险区,1 500~2 000 m的区域为低风险区,2 000~2 500 m为中风险区,2 500~2 600 m为高风险区,分区结果与实际情况相符,为凉山州未来水稻生产布局、应对气候变化的影响提供科学依据。     

Choice of parameters for passive shielding of power-frequency magnetic fields

Epidemiological studies suggesting the possibility of harmful effects on human (specifically children’s leukaemia) due to long-term exposure to magnetic fields of extremely low frequency (e.g. 50/60 Hz) and relatively low values (i.e. over the microtesla range) have stirred high activity in the topic of magnetic field mitigation. To reduce these fields, it is common to use passive metal screens (e.g. plates made of aluminium or steel). To design them, effective and fast numerical computations are highly desirable. In this article, a method is presented, which computes various parameters of screens in a given shielding problem and yields magnetic field distribution and shielding factors. The method takes into consideration the 3D field distribution and is able to solve systems with large aspect ratios (thin thickness in comparison with its other dimensions); this is a common problem where other methods such as finite elements often experience difficulties. The presented method computes separately the field inside and outside the screens. Afterwards, the solutions are “stitched” together along the border of the subregions. Two practical examples are given of the developed numerical method.     

Models at the interface between science and society: impacts and options

Within the CLEAR project a new approach to integrated assessment modelling has been developed for the participatory integrated assessment of regional climate change involving citizens' focus groups. The climate change decision problem was structured by focusing separately on climate impacts and mitigation options. The attempt was made to link the different scales of the problem from the individual to the global level. The abstract topic of climate change was related to options on the level of a citizen's individual lifestyle. The option of a low energy society was emphasised in order to embed the climate change decision problem in a wider range of societal concerns. Special emphasis was given to the characterisation and communication of uncertainties. The chosen approach allows different kinds of uncertainties in one framework to be addressed. The paper concludes with a summary of the experience made, and recommendations for the use of models in participatory integrated assessments. This revised version was published online in July 2006 with corrections to the Cover Date.     

抽穗期低温对杂交晚粳宁67A／K1722结实率的影响

利用人工气候箱研究了抽穗期低温对杂交晚粳新组合宁67A/K1722开花量、包颈率及结实率的影响。结果表明：低温使抽穗速度明显变慢,开花量减少,包颈率呈现上升趋势,不同温度处理对结实率的影响不同,17℃与21℃处理间差异极显著,而19℃与21℃间差异不显著,不同时期处理及不同处理天数（3d,5d,7d和12d）间结实率差异不显著,表明该组合对抽穗期低温的耐受力较强,对抽穗期耐低温的鉴定指标问题进行了讨论。     

县级空气自动监测站故障分析及排除

结合县级空气自动站运行实践,研究"读数负值"、"管路凝水"、"频繁报警"等常见故障,解析原因并提出有效的解决方法。探索用头发丝结清除石英管内污物,解决氮氧化物分析仪气路堵塞、流量降低的难题,方法简便有效。     

燃煤电厂超低排放气态污染物监测技术综述

介绍了燃煤电厂超低排放气态污染物监测系统的采样系统和分析单元,分析了其各自的优缺点。对稀释抽取式、冷干抽取式和热湿抽取式3种采样方法,以及非分散红外吸收法(NDIR)、非分散紫外吸收法(NDUV)、紫外差分吸收法(DOAS)、紫外荧光法(UVF)和化学发光法(CL)5种分析方法进行对比。结果表明,冷干抽取式+紫外差分法以及稀释抽取式+紫外荧光法+化学发光法可以较好地符合燃煤电厂超低排放监测的要求。     

气象条件对静电除尘器低温腐蚀的影响分析

在已建成投产的静电除尘器当中,低温腐蚀是严重影响除尘器使用寿命的因素之一。以某烧结厂静电除尘器为研究对象,利用CFD软件,采用标准k-ε湍流模型对除尘器内部流场及温度场的分布进行数值模拟研究,得到静电除尘器内部流场和温度场分布特征,分析这些数据可知除尘器温度最低部位位于灰斗处,外界气温对壳体温度具有正相关的影响,在此基础之上有针对性地提出对静电除尘器壳体低温腐蚀的防治措施。